ARCSI corrections for Sentinel2 level 1C

[Parul Vinze]

Hi Pete,
I am processing Sentinel2 level 1C images using ARCSI to generate the STDSREF products but after running the following command I am getting an error and the STDSREF products were not generated. I am using ARCSI version 4.0.3

When I was using the same commands for another study area with the same dataset source, it was working fine.

Command:
arcsi.py -s sen2 -p STDSREF TOPOSHADOW FOOTPRINT METADATA DOSAOTSGL -i "/media/sf_H_DRIVE/Khumbu_Sentinel/Inputs_RVL/S2A_MSIL1C_20161010T044712_N0204_R076_T45RVL_20161010T045542.SAFE/MTD_MSIL1C.xml" --outpath "/media/sf_H_DRIVE/Khumbu_Sentinel/Output_RVL_2" --stats --format KEA --tmpath "/media/sf_H_DRIVE/Khumbu_Sentinel/tmp" --dem "/media/sf_H_DRIVE/RVL_DEM_proj.kea" --demnodata -32768 --interp cubic --interpresamp near

Error: please see the attached screenshot.

Can you please help me to understand the issue and possible solution?

Thank you.

[Peter Bunting]

Hi, 

I’ve had a look at this and I think it is probably is a bug in ARCSI where is can't round up an elevation over 8500 m due to a hard coded threshold. I think I’ve fixed this bug and I am currently building 4.04 on conda-forge so in a couple of hours or so if you try updating you arcsi version (check you have updated to 4.04) I hope that it will work for this image. 

Many thanks, 

Pete

--
You received this message because you are subscribed to the Google Groups "RSGISLib Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rsgislib-suppo...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/rsgislib-support/8762d763-7a9d-46e5-8d9e-cf1c6af723a8n%40googlegroups.com.
<Sentinel_arcsi_error_khumbu.JPG>

[Parul Vinze]

Hi Peter,

Thank you very much for the quick reply. This tool is amazing and very helpful.

As you suggested, I will update ARCSI and will get back to you.

Thanks again.

[Parul Vinze]

Hi Peter,

Thank you for the new updated version of ARCSI (4.0.4), I installed it in the existing environment and it worked for me and the issue is solved now.

Thank you very much for the help. Your quick reply helped me a lot.

Regards,

Parul

--

Regards,

Parul Vinze 

PhD Scholar, Civil Engg Dept

IIT Indore

Email- phd190...@iiti.ac.in

            parul...@gmail.com