powering the kinect from the pioneer p3dx base, how to ?

[Alex R]

Hello everyone,

Does anyone have tried powering the kinect sensor via the pioneer mobile base. As far as I know there are two aux pins for 5v and 12 v supply from the p3dx base. 

However, I do not know how to use this pins. If someone can help me would be great. 

I am using the platform using ROS hydro on ubuntu system (laptop), no dedicated microprocessor on the robot. 

Thanks

Alex

[Reed Hedges]

Also http://robots.mobilerobots.com/wiki/Connecting_Devices_to_the_Pioneer_3_Motor-Power_Board

 

 

 

From: Reed Hedges
Sent: Wednesday, February 04, 2015 4:48 PM
To: 'Alex R'; ros-sig...@googlegroups.com
Subject: RE: [ros-sig-pioneer] powering the kinect from the pioneer p3dx base, how to ?

 

Hi Alex, the power outputs are described in the Pioneer 3 manual. See also http://robots.mobilerobots.com/wiki/Kinect_on_a_Pioneer_Mobile_Robot_with_Onboard_SBC

--
http://www.ros.org/wiki/sig/robots/Pioneer

[Reed Hedges]

Hi Alex, the power outputs are described in the Pioneer 3 manual. See also http://robots.mobilerobots.com/wiki/Kinect_on_a_Pioneer_Mobile_Robot_with_Onboard_SBC

 

 

From: ros-sig...@googlegroups.com [mailto:ros-sig...@googlegroups.com] On Behalf Of Alex R
Sent: Wednesday, February 04, 2015 8:12 AM
To: ros-sig...@googlegroups.com
Subject: [ros-sig-pioneer] powering the kinect from the pioneer p3dx base, how to ?

 

Hello everyone,

--
http://www.ros.org/wiki/sig/robots/Pioneer

[Alex R]

Dear Reed,

Thanks for the links. Exactly what I was looking for. Big help. 

Regards

Alex