Red Giant Features

[Niklas Terki]

Astate-of-the-art high-pressure molding process is used to produce complex-shaped carbon fiber components that are lighter, stiffer and stronger than similar components made from aluminum. This technology is used in critical performance parts such as Maestro Suspension rocker links.

This High-Performance level, state-of-the-art aluminum material is made predominantly from 6011 alloy and delivers best-in-class strength-to-weight ratios. These framesets also feature unique welding technologies for a high-performance ride quality.

Introduced by Giant with the professional Team ONCE in the 1990s, Compact Road revolutionized the look and feel of high-performance road bikes forever. A downward sloping toptube (from the headtube to the seattube) creates smaller front and rear triangles for a lighter, stiffer bike. It also makes it easier for riders of all sizes to have a perfect fit.

Specific composite layup and tube shaping, including ultra-thin and flattened seatstays, a low seatstay/seattube junction, and thin, slightly curved fork legs combine for a balanced, compliant ride quality and reduced rider fatigue.

This range extender can boost total capacity by 250Wh. It has all the latest technologies combined with an up-to-date design that fits a select number of bikes. It has smart technology so it automatically turns on when your battery loses power, giving you peace of mind that you can reach your destination.

The flip chip allows riders to quickly adjust the geometry of their Maestro-equipped mountain bike to better suit how and where they ride. It lets riders change the headtube/seattube angles and bottom bracket height via eccentric (offset, two-position) hardware located on the upper rocker arm.

A quick and simple adjustment on the new Glory Advanced lets you fine tune your bike for the way you ride. A two-position flip chip located on the rear dropout changes the rear-center measurement so racers can get the best performance out of the bike depending on their riding style and terrain.

A massive rectangular downtube and oversized toptube work in unison to provide superior front end lateral and torsional steering precision. The precisely engineered, rectangular shaped downtube yields unprecedented steering and pedaling stiffness.

A massively oversized bottom-bracket/chainstay area features a fully integrated, 86-millimeter wide bottom-bracket design (92-millimeter wide for off-road bikes). Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside.

The updated RideControl App expands the existing customization options for your SyncDrive motor. Now you choose exactly how you want the system to perform. You can use the app to adjust from the battery-saving Eco mode all the way up to Power mode, and collect all relevant ride metrics during your activity.

RideControl Charge combines all functions in one device. It displays the EnergyPak capacity, which power assist mode is being used, and speed or total distance. Its sleek design provides an ergonomic, handlebar-mounted control center so that the support levels can be accessed easily and comfortably. RideControl Charge also offers convenient charging with its user-friendly USB charger. And now Giant E-bikes can be wheeled along more easily with our new Walk-Assist function.

This two-in-one unit features buttons to control support modes plus an integrated color display. You can check range, battery level and support mode, along with standard cycling data such as speed and distance without having to another screen to the E-bike. It also has an ANT+ connection so you can connect a heart rate monitor and other fitness devices.

This updated control system features clean buttons that are integrated with the handlebar grips. You can install the three-button control on the left or right side, making it easy to switch power modes. You also have the option of adding a second control on the other side. Using the RideControl App, you can configure it to your own personal preferences.

Available on premium Giant E-Bikes, RideControl Go features a multipurpose button integrated into the top tube. Colored LEDs allow you to switch power modes from the top tube and keep a clean handlebar setup. The lights also display battery level and support mode.

RideControl ONE takes your E-bike riding experience to new levels with integrated button controls and a clean handlebar free of any display. The E-bikes equipped with RideControl ONE can connect with the Giant E-bike App to function as your E-bike display

The RideDash EVO is completely revised for 2021. It has a sportier outlook with a full-color display and graphics showing new functionalities to enhance the E-bike riding experience. It has handlebar/stem integration options and a reliable, wired connection. The low-profile screen shows ride information including speed, distance, battery range and Navigation, heart rate and fitness require the app to be connected.

The SyncDrive Pro system, powered by the new Shimano EP8 motor, is a customized powertrain with 85Nm that produces smooth acceleration on paved roads, gravel or dirt. You can switch support modes using Shimano Di2 shift levers, allowing for a clean cockpit setup without an additional control unit.

The Giant SyncDrive Life is the ideal solution for E-bikes with low step-through frames. This compact, mid-drive motor ensures perfect weight distribution, which makes the E-bike more stable and balanced. Centralized mass leads to a natural weight balance while riding and while stopped. SyncDrive Life helps you ride with comfort and freedom, delivering a maximum 60Nm (Newton Meters) of torque with proven performance and reliability.

This rear hub motor delivers up to 30Nm of pedal assistance in a lightweight, quiet system. It features 3 support levels (Power, Active, Eco) to help riders climb hills with less effort. It also features Smart Assist technology, which uses five sensors to determine the exact amount of pedaling support needed for a smooth, natural riding experience.

Building on our over 40 years of expertise in the science of bicycle and bicycle component manufacturing, Giant introduces the Crest, our all-new, fully tunable suspension fork that brings plush action and precise control to more riders everywhere.

Since its introduction in 2015, Dynamic Balanced Lacing (DBL) has been the cornerstone of Giant WheelSystems. DBL ensures that spokes are set for optimal tension when under dynamic load, resulting in enhanced durability and pedaling efficiency. The enlarged DBL hub flange also increases the spoke bracing angles, which boosts overall torsional/transmission and lateral stiffness for better power transfer and more stable sprinting.

E.I.T Liege features a minimalist shape with only the smoothest top layer of the pad in contact with the rider. The central perennial channel provides stability in the saddle and pressure relief on soft tissue to improve blood flow.

Featuring multi-directional curvature and a smooth surface, it provides a great fit, enhanced stability and as well as gradual transition areas. The central channel is engineered according to specific anthropometrical parameters that support male anatomy while in saddle, relieving pressure and favoring blood flow.

ExoWrap works in harmony with the ExoBeam to produce a unique 360-degree foot enclosure for customizable fit and support. While most shoe enclosures simply pull the foot down toward the sole, ExoWrap fully supports the foot by also pulling up.

When your wheel hits a sharp or square edge, especially at speed, pinch flats and rim damage can occur. Wide Guard technology minimizes this risk by broadening the contact point between the rim and tire with a solid 5mm rim sidewall. That means you can skip the heavy tire inserts to have less unsprung weight on your bike and allow your suspension to perform better. The wide sidewalls also better protect your wheel from big impacts, reducing the possibility of rim damage.

When engagement force was applied to determine how many cycles a hub can withstand before showing signs of significant wear, the TRX HE hub was five times more durable compared to benchmark competitors.

Motion Efficiency System combines a stiff and efficient pedaling platform with just enough torsional flex to reduce pressure and strain in the lower leg. The result is a more natural foot movement during the pedal stroke to optimize comfort, power transfer and efficiency.

Mips Evolve Core is designed to add protection in helmets against the rotational motion. The rotational motion is a combination of rotational energy (angular velocity) and rotational forces (from angular acceleration) that both affects the brain and increases the risk for minor and severe brain injuries. Mips has been scientifically proven to reduce rotational motion when implemented in a helmet by absorbing and redirecting rotational energies and forces transferred to the brain.

Wind protection, durable water-repellent finishes and laminations are engineered to fend off windy and rainy conditions, while remaining breathable to assist your body in regulation of body temperature.

TOP INTERFACE LAYER Featuring BRS Berenis Premio ECO fabric, a superfine polyamide technofiber with hydrophilic features; super soft to the touch with enhanced moisture management and quick drying properties.

The SXC 32 fork sets a new benchmark for sport-level suspension performance. With a chassis directly derived from the acclaimed Crest fork and featuring a forged crown and hollow bridge lowers, the SXC 32 offers a superior combination of robust strength, suspension performance and light weight.

In collaboration with the Insurance Institute for Highway Safety, Virginia Tech have rated a total of 128 bike helmets using the STAR evaluation system. The bicycle helmet impact tests evaluate a helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. Helmets with more stars provide a reduction in concussion risk for these impacts compared to helmets with less stars. Read more.

3a8082e126