turntable not turning

[Danny Lauwen]

can someone give me a hint where to look if the turntable is not turning on a 477 hit tracker.

the carrousel turns and he puts the record on but it thusend spin?
is there any diagram where i can get to look for faults

[jeanmi chel]

hi did you check if the turntable motor turns or not? not the plate, the motor ;)

[Danny Lauwen]

Thanks for the quick response, it my friends machine, so have to go check, this is gonne ben next week.

Danny.

Op 31 okt. 2018 07:19 schreef jeanmi chel <tshirt...@hotmail.com>:

--
You received this message because you are subscribed to the Google Groups "rockola477" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rockola477+...@googlegroups.com.
To post to this group, send email to rocko...@googlegroups.com.
Visit this group at https://groups.google.com/group/rockola477.
For more options, visit https://groups.google.com/d/optout.

[Danny Lauwen]

i just checkt and the motor is not turning,

i have voltage on the connector of the motor, 

220 v   &  70 v  & 23 v

are the voltages ok?

[jeanmi chel]

You need the shematics

[jeanmi chel]

Gimme your email

[Danny Lauwen]

danny....@telenet.be

[jeanmi chel]

Did you get the files?

[jeanmi chel]

??

[Danny Lauwen]

yes got the files, thanx, its whas a bad fuse holder onder the play relais.

But now we saw a other problem when the record is finished he the gripper arm won't catch the record on the turntable.
It seems to jump up when the tone arm cum up from the record.

is so bad when de gripper arm is onder the tone arm the needle kits the gripper arm when it go's to his home position.

is there anywhere where i can adjust this?

[jeanmi chel]

speak frenc if you want

yes there is an adjusting screw behind the arm, i think you can see it from the rear

[jeanmi chel]

it s on the files, page 62 (there is two pages 62, it s on the second)

On Thursday, November 15, 2018 at 9:45:02 PM UTC+4, Danny Lauwen wrote:

[Danny Lauwen]

i added a video showing the gripper arm trying to grip the record

[jeanmi chel]

Can t read

[Simon Daniels]

Hi Danny i have the same problem you first poted my turntable doesnt turn. Can i ask where the "play relay fuse" is exactly ? I will check and see if i have the same problem.

Thanks Simon.

[danny....@telenet.be]

Im not shure anymore , but i found the problem checking the incomming and out going voltage on the fuse holder ( this by opening op the metal box) be carful that you not get shockt, for me the fuse holder whas bad and dident give the 120v to the relais.




----- Oorspronkelijk bericht -----
Van: "'Simon Daniels' via rockola477" <rocko...@googlegroups.com>
Aan: "rockola477" <rocko...@googlegroups.com>
Verzonden: Vrijdag 14 december 2018 17:41:32
Onderwerp: Re: turntable not turning

Hi Danny i have the same problem you first poted my turntable doesnt turn. Can i ask where the "play relay fuse" is exactly ? I will check and see if i have the same problem.

Thanks Simon.

[Simon Daniels]

Thanks for that i will check it out!

[Simon Daniels]

Just wanted to say thanks again! Jukebox is now working again!