Vevor Vinyl Cutter Drivers Download
Harold Yengo
I had a friend that bought a 34" Vevor cutter, it came with a special edition of SignMaster software and there was a giant yellow label on the machine saying "Choose Model D-870 during initial installation setup" --- Now, my friend had seen me using SignBlazerElements in my studio and she wanted to work within SignBlazer and although we got the unit to respond with LiYu AND RedSail drivers in SBE, the cuts wouldn't close properly (left a tiny gap on each letter). So, I simply went ahead with installing (and registering) SignMaster and that's the program she now uses to cut (still designs in SignBlazer and exports .eps then Imports to SM).
have you read everything in the Newbie Manual? download in first post, You also need to give more info if you expect to get help. Such as what vinyl cutter? What operating system? USB or serial? What cutting software? Exactly what is the problem? What all have you tried to do? Are you getting an error code? Without the necessary info it's only a guess to help you.
Hi well the cutter is the US cutter MH 871-MK2 and it's running on a windows 7 64 bit. and I'm connecting the cutter with the usb cable and I tried to cut with sign blazer and signcut pro and nothing happens, with sign blazer it shows a message that cannot open the output device, error initializing cutter and well I have downloaded all the drivers that US cutter have for the MH series cutter and nothing have worked and no I don't get any error code. Any help will be like heaven to me. thanks
Idk if this will help or if anyone has found a solution but my cutter was not being recognized on windows 10 it worked with windows 7. so i reverted back to windows 7 and it was still not recognizing the cutter. I tried many cables many drivers everything i could think of but the issue was the usb port was bent if you take the serial screws off the plate(the 2 nuts with threads) on the side and remover the 4 black screws on the inner side of the cutter you can access the board and my port was bent to one side and it had a tab not connecting(Looks like a L on its side) i am assuming its some kind of ground i slowly bent everything back to straight and made sure the tab was touching again and it instantly started working and being recognized within windows.
Hope this helps some people.
try both of the mh drivers listed on this page-- it appears to be one of the foreign sold refine plotters so thinking this might work.
What cutting software are you going to use with it - a search on the forum will have signblazer which is free to get you going and later maybe vinylmaster for an updated software
I have a K1-1350 and it came with SignMaster Cut, basic cutting software. It came with signmaster on a thumbdrive - which could not be used to install the software. Had to use the optical drive to install.It's decent budget cutter, but so far has been working flawlessly. If you can find a copy of SignMaster Cut, it comes with the drivers and all that is needed. Of course since I am answering you two years too late, if you haven't gotten it working then you likely have tossed it. I bought mine new from vevor.com for around $500. Mine has a comm port, which your model unfortunately does not have - and the comm port is easiest way to set up. If you use the USB port, then you need the driver. -tools-features/
08ab062aa8