Futura nueva controladora de Lynxmotion con conexión para AX12+
1 view
Skip to first unread message
Jose
Aug 29, 2008, 7:56:44 AM8/29/08
to Robots educativos
Parece que los servos AX12+ están arraigando :)
La nueva controladora de Lynxmotion incluirá una conexión para AX12+.
Time for an update. Mike is starting to work on the SSC-NG board
again. What's in there?
o ATMega1281 Processor
128k Flash
4kb EEProm
8kb RAM
54 GP I/O pins
6 PWM channels
2 USART
8 ADC channels
o USB / TTL comms supported.
o 32 channels of I/O direct to the bus. All can be servos.
o 1 dedicated I2C bus.
o 1 dedicated 1mbps half duplex serial bus. (AX-12)
o Same footprint as SSC-32 / Bot Board II.
o Larger terminal blocks for power.
o VL/VS jumpers on banks of 8 I/O.
o Analog reference voltage brought to jumper.
o Some small LED's on board for troubleshooting.
http://www.lynxmotion.net/phpbb/viewtopic.php?t=3362&postdays=0&postorder=asc&start=26
La nueva controladora de Lynxmotion incluirá una conexión para AX12+.
Time for an update. Mike is starting to work on the SSC-NG board
again. What's in there?
o ATMega1281 Processor
128k Flash
4kb EEProm
8kb RAM
54 GP I/O pins
6 PWM channels
2 USART
8 ADC channels
o USB / TTL comms supported.
o 32 channels of I/O direct to the bus. All can be servos.
o 1 dedicated I2C bus.
o 1 dedicated 1mbps half duplex serial bus. (AX-12)
o Same footprint as SSC-32 / Bot Board II.
o Larger terminal blocks for power.
o VL/VS jumpers on banks of 8 I/O.
o Analog reference voltage brought to jumper.
o Some small LED's on board for troubleshooting.
http://www.lynxmotion.net/phpbb/viewtopic.php?t=3362&postdays=0&postorder=asc&start=26
Reply all
Reply to author
Forward
0 new messages