Collaborating on the riscduino projects

[Sanyam Mulay]

Hello sir.
I am interested in taking the riscduino project further.

Could you please share your email so that we can keep in touch better ?

I have extensive programming experience but I am new to the VLSI field.
But I am a quick learner. 

Here's my plan:
- build the riscduino SoC for an FPGA - I have the ULX3S board

- see if I can get the arduino bootloader loaded into the SoC
- and use the arduino IDE to program the SoC

-x-x-x-
Also, will check out if getting micro-python / circuit python loaded onto the SoC is possible, 
- if possible - try it out

- if not possible, then see if I can tweak the memory capacity to get a capable SoC.

-x-x-x-

Please let me know if someone is attempting this already, so that I don't repeat their work.

Regards,
Sanyam

[Dinesh A]

HI Sanyam

Yes, it will be nice to see someone porting RISCDUINO into the FPGA platform.

Let me know, if you need any specific help/support/clarification needed on the project.

If needed we can sync-up in google meet ...

-Thanks

Dinesh.A

[Yi-Kuen Lee]

Dear All,

  I have been doing CMOS MEMS sensors using TSMC 180nm CMOS process/UMC 180nm CMOS MEMS process/Global Foundry 180nm CMOS process (PDK) using Cadence EDA for about 8 years at HKUST. In addition, I have been using the open-source Arduino MCU for both education (MEMS course for PG students) and research for 10+ years. I found that this project is very meaningful for the education of next-gen semiconductor and MEMS engineers.

Best Regards

Prof Yi-Kuen Lee
Department of Mechanical & Aerospace Engineering
Department of Chemical and Biological Engineering
Hong Kong Center for Construction Robotics
Hong Kong University of Science and Technology
Tel:+852 2358-8663, Fax:+852 2358-1543
http://meyklee.people.ust.hk
https://www.linkedin.com/in/yikuenlee

[Munjani Jayesh]

Hello Sanjay

Can you please help me to replicate the following repository. 

git clone https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-008/slot-005

On Wednesday, February 15, 2023 at 9:01:21 PM UTC+5:30 Sanyam Mulay wrote:

[Yuda Wang]

Hi, Mujani,

slot005 is too large to upload, sorry for that. Maybe you can share me a google drive so that I can upload that.

Best,

Yuda