Check Logitech Mouse Battery Level
Hilma Klingaman
If you use a Logitech wireless mouse on your Windows 10 computer, you might want to know how to check its battery level. This can help you avoid running out of power unexpectedly and ensure that your mouse works smoothly. There are different ways to check Logitech mouse battery level on Windows 10, depending on the model of your mouse and the software you have installed. Here are some of the most common methods:
Logitech Options is a software that allows you to customize and optimize your Logitech devices. It also shows you the battery status of your wireless mouse and keyboard. To check the battery level of your Logitech mouse using Logitech Options, follow these steps:
Logitech SetPoint is another software that lets you customize and control your Logitech devices. It also shows you the battery status of your wireless mouse and keyboard. To check the battery level of your Logitech mouse using Logitech SetPoint, follow these steps:
If you don't have any Logitech software installed, you can still check the battery level of your Logitech mouse using Windows Settings. This method works for most Bluetooth mice, but not for mice that use a USB receiver. To check the battery level of your Logitech mouse using Windows Settings, follow these steps:
Checking Logitech mouse battery level on Windows 10 is easy and can help you avoid running out of power at inconvenient times. You can use Logitech Options, Logitech SetPoint, or Windows Settings to see how much battery your mouse has left. If you notice that your mouse battery is low, you can either replace it with new batteries or recharge it if it has a rechargeable battery. You can also adjust some settings to extend your mouse battery life, such as reducing the polling rate, turning off backlighting, or enabling power-saving mode.
I tried this command using "Powerbeats Wireless" and "bluetoothaudiod" for the 'deviceName''s, but neither returned the batterypercent. I tried ioreg -c bluetoothaudiod grep -i battery to get general information about the battery, and get this as a response:
If I connect the headphones to my iPhone, the battery level immediately pops up on the toolbar. This leads me to believe that the device is broadcasting battery level, and that I should be able to access this information from my computer.
Looking at the Bluetooth docs, it seems there's a Battery Service which exposes the Battery State and Battery Level. The Battery Level can be read using the GATT Read Characteristic Value sub-procedure, so I need to figure out a way of interfacing with this service from the command line. I have a feeling batterypercent may only be coded for standard peripherals (trackpad, mouse, keyboard), as all battery monitoring widgets I've tried are only compatible with such devices.
Revisiting this almost a year later. I know have a wireless trackpad & keyboard, and can see their battery levels perfectly fine ( in both the toolbar or the command line). Still unable to get the battery level from my headphones though, and not sure why :/
I just discovered that to check the battery level of my powerbeats 3 on my Mac I just go to the bluetooth menu in the icon area in the top right of the screen, hover over your connected powerbeats and then it shows the battery level right there. Hope that helps.
The macro triggers every 3 minutes. It will give you a notification when the level falls below a configurable threshold. The notification will show you the threshold and the current battery levels of mouse and keyboard:
Is there any way to access the current battery percentage of a third party mouse? The battery level of my MX Master is displayed under the Bluetooth menubar item, so I'd think it must be accessible somehow, but was surprised not to find anything on the forum about it.
I use this shell script with Swiftbar on Monterey with my Magic Mouse (Bluetooth). It just looks for batterypercent in ioreg's output. You could test that on the command line to see if it works for your mouse.
If typing you'll need to do
bash to go into the bash shell then
level...blah...blah...blah to run the command then
echo "$level%" to print the value of the variable then
exit to exit bash and go back to zsh.
The blunt force approach would be to check the percentage in your Bluetooth menu bar display and then run ioreg with no arguments in Terminal, saving it to a file if you like so you can hunt down the 90% or whatever the value is and see which parameter is reporting it.
Ok I just clicked on the bluetooth menu item to show the MX Master battery percentage, then immediately ran ioreg in Terminal, copied and pasted it to TextEdit and searched for "90", which the percentage actually happened to be at the time. It found nine entries, none of which seemed to relate to the mouse, although to be fair, I have no idea what I'm looking at!
The Logitech SetPoint even sends out a notification when the battery level is low, although there are indicators on the mouse to display approximate battery level. The same is the case with Bluetooth devices from other manufacturers as well.
Checking the battery levels for your connected Bluetooth devices can save you from a last-minute catastrophe when one suddenly stops working. Before you start your presentation, share your screen, join an online meeting, or begin that chat or phone call, will you check your batteries?
When we hover a mouse over the Volume icon in System Tray it currently shows the sound level indicator. Would it be possible to replace with Battery Level indicator (if connected to BlueTooth device) or add it along with Sound Level?
I have written a PowerShell script to obtain the battery level of my headphone.
If anyone wants to use it, just remember to follow the instruction on the comments and change the name of your Bluetooth device on variable 'BTDeviceFriendlyName' to the same name that appears assigned to your Bluetooth device.
The script also measures the time it takes to execute. I was a bit worried about the time it was taking to execute, so after tweaking and optimizing a little bit, I left it there for the next brave person that can find a way to make it faster ;-)
When you click through from our site to a retailer and buy a product or service, we may earn affiliate commissions. This helps support our work, but does not affect what we cover or how, and it does not affect the price you pay. Neither ZDNET nor the author are compensated for these independent reviews. Indeed, we follow strict guidelines that ensure our editorial content is never influenced by advertisers.
ZDNET's editorial team writes on behalf of you, our reader. Our goal is to deliver the most accurate information and the most knowledgeable advice possible in order to help you make smarter buying decisions on tech gear and a wide array of products and services. Our editors thoroughly review and fact-check every article to ensure that our content meets the highest standards. If we have made an error or published misleading information, we will correct or clarify the article. If you see inaccuracies in our content, please report the mistake via this form.
Every so often, I'll go to unlock my iMac, only to find either the mouse or the keyboard unresponsive. Sometimes, I'll click or type until the machine finally wakes up. Sometimes, however, clicking and typing has no effect.
As you know, the Magic Keyboard and Mouse depend on internal batteries to function, but neither device offers any indication as to how much charge they have remaining. For the longest time, it's been guesswork for me. I just assume that, after a few weeks, they need charging.
That's not an effective method of keeping a battery either well-charged or long-lasting. Unfortunately, MacOS doesn't have a built-in battery indicator for either the keyboard or mouse. You could always open Control Center, go to Bluetooth, and view the status of your keyboard and mouse batteries.
Fortunately, there's a much better way of doing this. Yes, you still have to do this through Bluetooth, but with a simple configuration, you can bypass the System Settings tool and have quick access to the information from your Menu Bar.
What you'll need: To do this, you'll need a MacOS device that uses either a Magic Keyboard or Mouse. One thing to keep in mind is that the option was moved from its original position when MacOS was upgraded to Sonoma. Since all of my devices were upgraded to the latest version of MacOS, I'll be demonstrating with Sonoma. If you have an older version of MacOS, you'll find the option directly in System Settings > Bluetooth. With Sonoma, that option is no longer there.
Near the top of the window, you'll see a listing for Bluetooth. By default, the associated drop-down will be set to Don't show in Menu Bar. Click that drop-down and change it to Show in Menu Bar. You can then close System Settings.
You should now see a Bluetooth icon in the Menu Bar. Click that icon to reveal a drop-down that includes your keyboard and mouse listed, each of which will have an associated battery percentage. If either device has a low battery, plug it in and let it charge. When one of those devices is plugged in, you'll notice it's grayed out. Be warned, if you click on either the mouse or keyboard entry, you disable it, so I'd avoid doing that.
And that's the easiest method of keeping tabs on the battery life for your Apple Magic Keyboard and/or Mouse on MacOS Sonoma. If you regularly find yourself guessing about how much battery remains, this is a great way to alleviate that guesswork.
Anyone knows how can I integrate my logitech keyboard and mouse into Home Assistant? I just want to make some automations which detect the battery level of my G502 and G915 peripherals, in order to switch power for wireless charging.
Well, theoretically you need super precise power consumption monitor. Then learn how battery charging change consumption load (charging curve) and then build triggers on top of the riching edge levels. That would work not only with Logitech mouse but with any battery-based device.
b37509886e