Re: Herma H400 16 R Manual
Christian Erdmann
How to Use the Herma H400 16 R Manual Labeler: A Step-by-Step Guide
If you are looking for a reliable and accurate labeling machine for your products, you might want to consider the Herma H400 16 R manual labeler. This labeler is designed to apply labels on round containers, such as bottles, cans, jars, and tubes. It can handle different label sizes and shapes, and it has a simple and ergonomic operation. In this article, we will show you how to use the Herma H400 16 R manual labeler in a few easy steps.
Step 1: Prepare the Label Roll
The first step is to prepare the label roll that you want to use for your labeling project. The Herma H400 16 R manual labeler can accommodate label rolls with a maximum diameter of 300 mm and a core diameter of 40 mm or 76 mm. To load the label roll on the labeler, follow these instructions:
- Remove the locking pin from the label roll holder and slide the label roll onto the holder.
- Align the label roll with the edge of the holder and insert the locking pin back into place.
- Make sure that the label roll is oriented correctly, with the labels facing up and the leading edge pointing to the right.
- Feed the leading edge of the label roll through the guide rollers and under the dispensing edge.
- Adjust the guide rollers to match the width of the label roll and lock them in place.
Step 2: Adjust the Label Sensor
The next step is to adjust the label sensor that detects the position of the labels on the label roll. The Herma H400 16 R manual labeler has a reflective sensor that works with different types of labels, such as paper, transparent, or metallic labels. To adjust the label sensor, follow these instructions:
- Turn on the power switch on the back of the labeler.
- Press and hold the SET button on the front panel until you hear a beep.
- Release the SET button and wait for a few seconds until you see a green LED light on the front panel.
- This means that the label sensor has automatically calibrated itself to the current label type.
- If you see a red LED light instead of a green one, this means that there is an error with the label sensor. Check if there is any dirt or dust on the sensor or if there is any gap or overlap between the labels on the label roll. If necessary, clean the sensor or adjust the label roll and repeat the calibration process.
Step 3: Set the Label Length
The third step is to set
The third step is to set the label length that you want to apply on your containers. The Herma H400 16 R manual labeler has a digital display that shows the current label length in millimeters. To set the label length, follow these instructions:
- Press the UP or DOWN buttons on the front panel until you reach the desired label length.
- You can also press and hold the UP or DOWN buttons to increase or decrease the label length faster.
- The minimum label length that you can set is 10 mm and the maximum is 999 mm.
- Once you have set the label length, press the ENTER button to confirm your selection.
- You will see a confirmation message on the digital display and hear a beep.
Step 4: Apply the Labels
The final step is to apply the labels on your containers using the Herma H400 16 R manual labeler. To apply the labels, follow these instructions:
- Place a container on the labeling platform and align it with the centering guides.
- Press the START button on the front panel to dispense a label.
- The label will be peeled off from the label roll and presented at the dispensing edge.
- Take the label from the dispensing edge and wrap it around the container.
- Make sure that there are no air bubbles or wrinkles on the label.
- Repeat the process for each container that you want to label.
Conclusion
The Herma H400 16 R manual labeler is a simple and efficient way to label your round containers with different sizes and shapes. It has a user-friendly operation and a versatile sensor that works with various types of labels. By following these four easy steps, you can use the Herma H400 16 R manual labeler to apply labels on your products quickly and accurately.
How to Maintain the Herma H400 16 R Manual Labeler
To ensure the optimal performance and durability of your Herma H400 16 R manual labeler, you should follow some basic maintenance tips. Here are some things that you should do regularly:
- Clean the label sensor with a soft cloth or a cotton swab to remove any dust or dirt that might affect its sensitivity.
- Clean the dispensing edge with a damp cloth to remove any adhesive residue that might cause the labels to stick or jam.
- Check the label roll holder and the guide rollers for any wear or damage and replace them if necessary.
- Store the labeler in a dry and cool place when not in use and avoid exposing it to direct sunlight or extreme temperatures.
How to Troubleshoot the Herma H400 16 R Manual Labeler
If you encounter any problems with your Herma H400 16 R manual labeler, you can try some simple troubleshooting steps before contacting the customer service. Here are some common issues and their possible solutions:
- The labeler does not turn on: Check if the power cord is plugged in securely and if the power switch is in the ON position. If the problem persists, check if there is any damage to the power cord or the power outlet and replace them if necessary.
- The labeler does not dispense labels: Check if there is enough label roll left on the label roll holder and if the label roll is loaded correctly. If the problem persists, check if there is any obstruction or jam in the label path and remove it if necessary.
- The labeler dispenses incorrect labels: Check if you have set the correct label length on the digital display and if you have calibrated the label sensor properly. If the problem persists, check if there is any gap or overlap between the labels on the label roll and adjust it if necessary.
- The labeler displays an error message: Check the digital display for any error codes and refer to the user manual for their meanings and solutions. If the problem persists, contact the customer service for further assistance.
How to Order Spare Parts and Accessories for the Herma H400 16 R Manual Labeler
If you need to order any spare parts or accessories for your Herma H400 16 R manual labeler, you can do so easily and conveniently through the official website of Herma. Here are some things that you should know:
- You can find a list of available spare parts and accessories for the Herma H400 16 R manual labeler on the product page under the "Downloads" section.
- You can download the spare parts catalog and the order form in PDF format and fill them out with the required information.
- You can send the completed order form to the email address or the fax number provided on the form.
- You can also contact the customer service by phone or email if you have any questions or special requests regarding your order.
- You can expect to receive your order within a few days after it has been processed and shipped.
How to Contact the Customer Service for the Herma H400 16 R Manual Labeler
If you have any questions, comments, or feedback regarding your Herma H400 16 R manual labeler, you can contact the customer service by phone or email. Here are some things that you should know:
- You can find the contact details of the customer service on the user manual or on the official website of Herma under the "Contact" section.
- You can call the customer service from Monday to Friday between 8:00 am and 5:00 pm (CET).
- You can email the customer service at any time and expect to receive a reply within 24 hours.
- You can also use the online contact form on the website to send your message directly to the customer service.
- You should provide your name, email address, phone number, and product model when contacting the customer service.
How to Compare the Herma H400 16 R Manual Labeler with Other Labeling Machines
If you are wondering how the Herma H400 16 R manual labeler compares with other labeling machines on the market, you can use some criteria to evaluate them. Here are some things that you should consider:
- The label size and shape: The Herma H400 16 R manual labeler can handle labels with a minimum width of 10 mm and a maximum width of 160 mm. It can also handle labels with different shapes, such as rectangular, oval, or irregular labels.
- The label type and material: The Herma H400 16 R manual labeler can work with different types and materials of labels, such as paper, transparent, or metallic labels. It has a reflective sensor that can detect the position of the labels on the label roll.
- The container size and shape: The Herma H400 16 R manual labeler can label round containers with a diameter of 10 mm to 160 mm. It has a centering guide that can adjust to different container sizes and shapes.
- The labeling speed and accuracy: The Herma H400 16 R manual labeler can dispense one label per second and apply it on the container manually. It has a digital display that shows the label length and a dispensing edge that presents the label at the right position.
- The operation and maintenance: The Herma H400 16 R manual labeler has a simple and ergonomic operation that does not require any training or skills. It has a user-friendly interface that allows you to set the label length and calibrate the label sensor easily. It also has a low maintenance cost and a long service life.
How to Write a Review for the Herma H400 16 R Manual Labeler
If you have used the Herma H400 16 R manual labeler and you want to share your experience with other potential customers, you can write a review for it on the official website of Herma or on other online platforms. Here are some tips for writing a good review:
- Be honest and objective: Write about your own experience with the Herma H400 16 R manual labeler and do not exaggerate or omit any details. Mention both the pros and cons of the product and explain why you liked or disliked it.
- Be specific and relevant: Write about the features and functions of the Herma H400 16 R manual labeler that are important for your labeling project. Give examples of how you used the product and how it performed in different situations.
- Be clear and concise: Write in a clear and concise language that is easy to understand by other readers. Use short sentences and paragraphs and avoid any jargon or technical terms. Proofread your review for any spelling or grammar errors before submitting it.
- Be respectful and courteous: Write in a respectful and courteous tone that does not offend or insult anyone. Do not use any abusive or inappropriate language or make any personal attacks. Respect other people's opinions and experiences even if they differ from yours.
Conclusion
The Herma H400 16 R manual labeler is a versatile and reliable labeling machine that can help you label your round containers with different sizes and shapes. It has a simple and ergonomic operation that allows you to set the label length and calibrate the label sensor easily. It can work with different types and materials of labels, such as paper, transparent, or metallic labels. It can dispense one label per second and apply it on the container manually with high accuracy. It also has a low maintenance cost and a long service life. If you are looking for a labeling machine that can meet your labeling needs and expectations, you should consider the Herma H400 16 R manual labeler.
0f8387ec75