Unfortunately removing the upload flags did not change the result. Also using xplainedmini_dw did not help in this case. I still see the same error of:
avrdude: jtag3_open_common(): Did not find any device matching VID 0x03eb and PID list: 0x2145
In both instances.
This time we do have some progress but I am still getting an error. I am using Zadig as suggested and have replaced the driver for mEDBG CDC (Interface 1). Using either libusb-win32 or libusbK I get the following:
I am trying to get the uboot SPL running on my sama5d3 xplained board. I can get the at91bootstrap boot.bin to function (provide me debug feedback) but I would like to use uboot. When I follow the instructions (and everything does compile fine) and create the boot.bin for uboot SPL all I get is the RomBOOT response. Is there a way to turn on debug or other method to see console feedback for the uboot SPL? I am using an SD card in the MCI0 slot. Could you share a functioning boot.bin as a sanity check?
@RobertCNelson thanks for the response. I followed your instructions and created the boot.bin and everything is fine as far as compiling and such. I am copying the boot.bin to my existing functional SD card, could there be something in that copy that makes the uboot SPL non-functional? That is why I was hoping to get a boot.bin so I could identify if it was something with the SD card or something with the compilation.
We use cookies to provide our visitors with an optimal site experience. View our privacy notice and cookie notice to learn more about how we use cookies and how to manage your settings. By proceeding on our website you consent to the use of cookies.
c80f0f1006