Vectric Aspire 4 0 Keygen
Melvin Amey
We are very proud of the quality of our software, and maintain an active and open forum at forum.vectric.com. The forum lets users ask questions and discuss techniques related to CNC and the software. In addition to direct input from Vectric, there are a large number of enthusiastic users who are always willing to help on any topic associated with CNC machining. Another very interesting section of the forum is the gallery area where users can post images of projects they have done using Vectric software. Please take a look, there are some very nice examples of work on there.
perhaps somebody experienced similare problems and may help.
I am using Aspire preparing and generating gcodes for carving with an SM 350.
For wooden refliefs for example it worked fine so far, but since a few days I am faced with a problem that I dont understand.
I prepared a model based on a dxf file ( or STL ) for some ribs that I wanted to cut out from 6 mm plywood using a 1 mm flat end flute. After a successsful and error free toolpath simulation in Aspire, I saved the gcode to USB stick using the latest aspire to snapmaker post - processor from github.
The carving starts as expected cutting out the ribs, but after a while Snapmaker makes surprisingly unexpected movements. For example it jumps back into already finished zones , doing toolpath that you cant find in the gcode and does ad hoc Z steps, so that in consequence the stock material material is damaged and the 1mm flutes are broken.
If I load the same gcode file into NCViewer there isnt any failure to discover.