[BEST] Download Meraki Configuration
Lior Springfield
Traditional hardware requires physical access to make configurations. But, thanks to Meraki cloud, you can configure everything before you even have your devices. Meraki devices get their configuration settings from the Meraki cloud. This means the only prerequisite to set up a device is an uplink connection on the device itself. As long as your device can connect to the internet and has the appropriate firewall rules configured, it will be able to contact the Meraki cloud. For more information, refer to the article titled Upstream Firewall Rules for Cloud Connectivity. Once connected, your device can check for and download its latest configuration, plus report on its performance.
All of your configuration settings can be set up in the dashboard, either before you have the device or after. There is a tremendous amount of flexibility with the initial setup for a Meraki deployment. Here's a list of the things you'll need to set up for your first devices and networks:
Devices go in a network, networks go in an organization, and organizations are managed by user accounts from the Meraki dashboard. This information, as well as device configuration settings, is stored in the Meraki cloud.
Now that you have a Meraki dashboard account and organization, it's time to create a network. Networks are used to contain devices and their configurations. It's common practice to create a device network for each physical location. For example:
Devices need to be added to a network to download their configuration. You'll also need to add the licenses for those devices. This can easily be done in one step using the order number associated with your devices and licenses.
To begin configuring your network, navigate to the desired configuration options in the Meraki dashboard and make your changes. Once your devices are online, they will automatically download their latest configuration within one to two minutes after saving the changes in the dashboard. For more information about the configuration options available for each type of Meraki device, refer to the respective product manuals below.
I would like to back up our entire Meraki organization, including all of the details of our network configurations. I have the python libraries and have implemented that. But this website looks like an interesting simple implementation. Does anyone know if this is legitimate?
Was going to try configuration sync, but when we go to that page it just says Source Network/Select Some Options but there's nothing in the dropdown. Target side also has nothing selectable. Tried a couple different browsers - is this functionality deprecated? Thanks!
Cisco Meraki devices implement a Local Status Page (LSP) feature. This is a web-based interface that is primarily intended to provide administrators with the ability to apply configuration settings that are required for the device to connect to the Cisco Meraki Dashboard, perform local troubleshooting, or monitor the device status.
The LSP requires authentication. When configured with the factory default settings, credentials for the LSP are comprised of the device hardware serial number as the username and an empty password. An attacker can take advantage of the low entropy of the default credentials as well as the lack of a mechanism that limits login attempts to carry out a brute-force attack against the LSP authentication form. If successful, the attacker may gain unauthorized access to the LSP and use it to modify sensitive configuration options, cause a denial of service (DoS) condition, or obtain low-privileged information.
The LSP is enabled by default.
Note: The hardware serial number is visible on the device surface and is printed on the shipment packaging.
Cisco Meraki devices are designed to be fully managed through a cloud management interface (Meraki Dashboard). In addition, Cisco Meraki devices include the LSP feature, which is a web administrative interface that is hosted locally on the device. The LSP feature is typically used during initial setup to apply configuration options that are needed for the device to connect to the Cisco Meraki Dashboard, monitor device status and utilization, and perform local troubleshooting.
The target audience for this informational advisory is Cisco Meraki customers who either have the LSP deployed with the factory default configuration or are unaware that the feature is available on their devices.
Cisco Meraki strongly encourages administrators who have the LSP capability set with the factory default credentials to review the configuration settings and change the factory default password to a strong password.
Note: The LSP can be disabled by a configuration change in the Cisco Meraki Dashboard. However, regardless of the setting, the LSP will remain active on devices that are equipped with a physical management port. Therefore, Cisco Meraki recommends that administrators change the factory default credentials.
I have gone through the configuration a number of times now resetting everything back and starting again but no luck. I can able to connect Join the wireless network as I can see the radio active. Any ideas what is the issue or where to look?
I'm trying to resolve an STP problem which has taken our whole network down the last two days, and I want to make sure I have the ideal MSTP configuration on our Catalyst 6509 for interoperating with all our switches, especially Meraki but also some legacy HP.
The Meraki Client VPN RADIUS instructions support push, phone call, or passcode authentication for desktop and mobile client connections that use SSL encryption. This configuration does not feature the interactive Duo Prompt for web-based logins.
You should already have a working primary authentication configuration for your Meraki MX users before you begin to deploy Duo.To integrate Duo with your Meraki MX, you will need to install a local Duo proxy service on a machine within your network. This Duo proxy server will receive incoming RADIUS requests from your Meraki MX, contact your existing local LDAP/AD or RADIUS server to perform primary authentication, and then contact Duo's cloud service for secondary authentication.
If you are already running a Duo Authentication Proxy server in your environment, you can use that existing host for additional applications, appending the new configuration sections to the current config. You don't have to set up a new Authentication Proxy server for each application you create. However, there are some cases where it might make sense for you to deploy a new proxy server for a new application, like if you want to co-locate the Duo proxy with the application it will protect in the same data center.
When installing, you can choose whether or not you want to install the Proxy Manager. The Proxy Manager is a Windows utility that helps you edit the Duo Authentication Proxy configuration, determine the proxy's status, and start or stop the proxy service. Learn more about using the Proxy Manager. Installing the Proxy Manager adds about 100 MB to the installed size.
The Duo Authentication Proxy configuration file is named authproxy.cfg, and is located in the conf subdirectory of the proxy installation. With default installation paths, the proxy configuration file will be located at:
Use the Proxy Manager editor on the left to make the authproxy.cfg changes in these instructions. As you type into the editor, the Proxy Manager will automatically suggest configuration options. Accepting these suggestions helps make sure you use the correct option syntax.
When you complete the Authentication Proxy configuration steps in this document, you can use the Save button to write your updates to authproxy.cfg, and then use the authproxy.cfg button to start the Authentication Proxy service before continuing on to the next configuration steps.
LDAP attribute found on a user entry which will contain the submitted username. In most Active Directory configurations, it should not be necessary to change this option from the default value. OpenLDAP directories may use "uid" or another attribute for the username, which should be specified with this option.
So, after I realized there was an update available for the lm module for cisco api, I got pulled out all the locations but then it shows device counts, not the devices themselves to be monitored. Using the API key with all the configurations, actual meraki devices can be monitored or not?
The configuration is very basic. 5G device has an access port with Vlan ID 5 and this is allowed on the Trunk port on the Meraki towards Palo Alto. Palo Alto has this tag used in its subinterface. The existing 4G device is connected in the very same way with its own access port using Vlan ID 4 and it has had no problems before I introduced the 5G. Currenlty though the 4G is stable.
Review your settings to confirm your configuration. For example, you might want to verify that you selected the appropriate users, groups, or roles on the Permissions page. Click Save when you are satisfied.
In the Meraki Dashboard, customers are able to view Catalyst switch statistics, configuration, and troubleshooting capabilities, providing a single pane of glass visibility. With monitoring, network device management and configuration changes are done elsewhere as the dashboard will have read-only access to the network devices. This means that IOS-XE features, CLI management, and configuration on the Cisco Catalyst switches in cloud monitoring mode are still supported.
After you have everything confirmed and ready to go, you can follow the Onboarding tool which has guided steps to bring up switches into the Meraki dashboard. It is recommended that you back up your device configuration before onboarding your Catalyst switches to the Meraki dashboard.
Configure NetFlow on the Meraki Dashboard by navigating to Network-wide > Configure > General. The NetFlow configuration settings can be found under the Reporting header and include the options below:
356178063d