Some spare boards...

[Jim McGinnis]

 

 GREETINGS:

 I am not sure if offering spare boards is kosher on this site, but I have some "extra" bare boards that

 I would like to see in use. (I am also posting on RC2014-Z80 group...)

 * In some cases, when you order boards to be built, you get 3, 5 or 10.
 * In some cases, it is impossible to get fewer than X boards.
 * In other cases, the brain is not engaged and you order the wrong board! :-P

 Here are the excess boards:

 1.    One (1) smbaker's WD37C65 based FD Controller Board     $6.00 mailed USPS = SOLD
 2.    Six (6)  SC115 v1.0 Prototyping Breakout Boards        $4.00 mailed USPS    QUANTITY AVAIL CHANGED
 3.    One (1) JM001 Rev 1.0 SIO/2 + CTC Boards             $4.00 mailed USPS      QUANTITY AVAIL CHANGED
        (silkscreen error overlaid with label maker labels, search EasyEDA)

 4.    One (1) RC2014 Dual Clock & Reset V2.1              $6.00 mailed USPS
 5.    One (1) SC117 V1.0 Z50Bus Prototype Breakout Board    $6.00 mailed USPS


 * If I need to send boards to non-48 state addresses may have to adjust for shipping.
 * If multiple boards are ordered, I can reduce the price based on postage savings!

 All of these modules were ordered from fab factories with the exception of the single SC117.
 I have built at least one of each board type (Boards 1-4 above) and they operate as designed.
 I have not built SC117, #5. I ordered it in error. :-/

 I am open to trades of any sort that are amenable to both parties... ;-)

 Best regards,

 Jim

[Sergey Kiselev]

Hi Jim,

Can I get the WD37C65 board please?

Thanks,

Sergey

On Monday, February 24, 2020 at 1:21:01 PM UTC-8, Jim McGinnis wrote:

 

 GREETINGS:

 I am not sure if offering spare boards is kosher on this site, but I have some "extra" bare boards that

 I would like to see in use. (I am also posting on RC2014-Z80 group...)

 * In some cases, when you order boards to be built, you get 3, 5 or 10.
 * In some cases, it is impossible to get fewer than X boards.
 * In other cases, the brain is not engaged and you order the wrong board! :-P

 Here are the excess boards:

 1.    One (1) smbaker's WD37C65 based FD Controller Board     $6.00 mailed USPS

 2.    Eight (8) SC115 v1.0 Prototyping Breakout Boards        $4.00 mailed USPS
 3.    Two (2) JM001 Rev 1.0 SIO/2 + CTC Boards             $4.00 mailed USPS

        (silkscreen error overlaid with label maker labels, search EasyEDA)

[Jim McGinnis]

Hi Sergey,

Yes. I have reserved that board for you.

I will PM so we can exchange details...

Jim

[Jim McGinnis]

      SOLD SOLD SOLD

  And one more board.  An RC2014 12-Slot Pro Board mostly assembled -

  I was using this board with jumpers - so, no power switch, power LED, or reset switch. Just pin headers.

  None of the traces have been cut on the bottom for isolating the outer slots.

  I will put both Electrolytic Caps, the Power Switch, and the Reset Switch into the shipment as loose parts.

  $29 shipped express mail to 48 states.

  Thanks

  Jim

[Jim McGinnis]

 

 Assuming I am able to get boards to Jose (international shipping) for a reasonable cost, here is what is left of the spare boards:

 

    3 x SC115

    1 x SC117

 Cheers

  Jim

[Jim McGinnis]

Some additional boards are now available...

I am moving to real hard disks and SSDs for all three different RomWBW driven systems and have the following in excess:

Three (3) RC2014 Compact Flash Storage v1.1 Modules w/CISCO 64MB CF Card each.

$20 each delivered to 48 states. If you want more than one, the price will go down a bit based on combined shipping costs.

These modules are modified to tighten the IO port addressing. They work perfectly as designed.

And the following bare boards remain available:

    3 x SC115

    1 x SC117

Regards,

Jim

[Jim McGinnis]

Looks like we have a few buyers:

Greg: 1 board

Tony: 2 boards

Wesley: standby

I will update post when the boards actually sell...

Cheers

Jim

[Jim McGinnis]

The CF Cards are all sold.

Greg: 1 board

Tony: 2 boards

Thanks for your interest.

Jim