[VENDO] Extrusor e hotend 1,75mm ALL METAL (Estado da Arte) da Micron3DP - alta qualidade
Rodrigo Marquez
Devido às despesas fim de ano, estou vendendo meu extrusor ALL METAL Estado da Arte, da Micron3DP, zero, nunca usado.
Pra mim, é o melhor extrusor que já tive. Compramos um na empresa que trabalho para testar, ficamos maravilhados e comprei esse para uso pessoal num novo projeto de impressora 3D.
Porém as despesas fim de ano me forçaram a vendê-lo.
LINKS:
http://www.ebay.com/itm/ALL-METAL-STATE-OF-THE-ART-3D-PRINTER-EXTRUDER-1-75-FILAMENT-HOT-END-REPRAP-/171203633804?hash=item27dc88228c:g:qVAAAOxyeglTZL8B
Segue as especificações do fabricante:
MICRON3DP is introducing the second generation "all metal" extruder integrated with patent pending "all metal" hot end, featuring a detachable filament guide and nozzle module "DFGNM", a revolutionary solution for the most common problem with 3D printers: material being stuck inside the filament guide or the nozzle.
Unlike existing designs, the new mechanical design enables fast and easy replacement of the most critical and problematic components: the filament guide and the nozzle, without the need to disassemble the heating block.
Another important feature of the design is that replacing the
filament guide http://micron3dp.com/collections/all-metal-extruders/products/all-metal-state-of-the-art-3d-printer-extruderand the nozzle module does not change the nozzle height
so that it is not necessary to readjust the nozzle height. Thus such a
maintenance operation is similar to replacing an ink cartridge on inkjet
printer.
Features:
- Innovative "all metal" hot end features a detachable filament guide and nozzle module "DFGNM"
- All metal design" enables working with polycarbonate at 280- 300 degrees Celsius and with future materials that require higher working temperatures beyond those supported by plastic extruders and hot end.
- Reliable design: enabling strong filament gripping by using high torque 1:13 gear motor and stainless steel 303 hobbed gear with special teeth profile.
- Continuous idler bearing preload adjustment using 2 set screws.
- Easy opening service door that does not change idler springs preload, while opening and closing the service door
- Smooth filament feeding design that prevents the filament from being stuck after passing the hobbed gear.
- Tested with PLA, ABS, polycarbonate, nylon and PVA.
Specification>>
Electrical:
Motor: Nema 11 Step Motor.
Rated current/Phase: 0.67 Amps
Rated voltage/Phase: 6.2 VDC
Fan: 40x40x20 size, 12VD
Heaters: 12V, 60 watt
Thermistor: 100K ohm NTC thermistor
Mechanical:
1:13 Planetary Gearbox
Materials: black anodize Aluminum, Stainless Steel and Brass.
Filament size: 1.75mm
Nozzle size: 0.35mm is the shipping standard, 0.5mm available upon request
Total weight: 440 gram
Comprei pelo EBAY (link acima), no valor de US$ 289,95 + US $19,95 (frete) = US $309,90 = +- R$1.200,00
Aceito propostas, devido à urgência de grana rs
Abraço,
Rodrigo
