Inrico B01 No PTT
24 views
Skip to first unread message
Mike Shimek
Apr 8, 2024, 6:51:09 PM4/8/24
to repeaterphone-users
Just got the Inrico, which is supposed to work on Repeaterphone. Audio is fine, TX and RX, but no PTT. When I go to External PTT in the menu, I see Bluetooth Devices, and the ever turning wheel of eternity spinning. Do I have a setting off? Looked through the messages for a clue, but found nothing, as this is a tested device. I have the latest IOS installed on an iPhone 11.
Thanks, WA8ZYT
VA2WE
Jun 29, 2024, 10:04:45 AM6/29/24
to repeaterphone-users
Mike,
I use Inrico B2 for iPhone: https://www.inricosolutions.com/Accessories/bluetooth_microphone_b01.html
Not sure if B1 works well with it?
I use Inrico B2 for iPhone: https://www.inricosolutions.com/Accessories/bluetooth_microphone_b01.html
Not sure if B1 works well with it?
VA2WE
Jun 29, 2024, 10:25:00 AM6/29/24
to repeaterphone-users
Hi Mike,
In my case, when I go into "External PTT", I press the PTT on the Inrico and after a few seconds it appears in the External PTT menu and then I can start using the speaker mic. But be aware that sometimes RP crashes and sometimes it doesn't, as explained by Wes.
But when it doesn't crash, it works well because RP and iOS use the same sampling rate of the active audio (see Wes' post).
In my case it doesn't make any difference if I disable or enable "voice processing".
In my case, when I go into "External PTT", I press the PTT on the Inrico and after a few seconds it appears in the External PTT menu and then I can start using the speaker mic. But be aware that sometimes RP crashes and sometimes it doesn't, as explained by Wes.
But when it doesn't crash, it works well because RP and iOS use the same sampling rate of the active audio (see Wes' post).
In my case it doesn't make any difference if I disable or enable "voice processing".
On Monday, April 8, 2024 at 6:51:09 p.m. UTC-4 Mike Shimek wrote:
0 new messages