My all temp sensors are to ZERO

[LukeLuke]

I use the last library of Curt and it' s always work right.

Yesterday i change the DP PWM from 75 to 80 and the lights go on, had to be turned off, so i reset the controller (making power off and on).

When it start the temp is always ZERO, i try to reset and reprogram it... but nothing.

What can i do ?

Thanks

Bye
Luca

[Paulo Hanashiro]

Try to remove all temp sensors, reset the controllers without the sensors, and then reinsert all sensors.

[LukeLuke]

ok thanks....

this evening i'll try it..

Bye
Luca

2011/5/3 Paulo Hanashiro <paulo.h...@gmail.com>

[LukeLuke]

i try it .... but nothing.

All the sensors is to ZERO

Bye
Luca

2011/5/3 LukeLuke <lukelu...@gmail.com>

[Roberto Imai]

All 3 show zeros?

All of a sudden?

Try using just one at a time. Do you get anything?

 

Roberto.

[Roberto Imai]

Make sure you reboot the controller everytime you are trying a different sensor.

The controller scans for new probes only once and it is when it initializes.

 

Roberto.

 

[LukeLuke]

if attach only the room and wather temp it' s work.

the probe for the LED has an extension cable, can is this ?

Can you explain me, the order for the probe ?

On the controller the center socket is Temp1 ? and Temp2 e 3 is at left or right ?

Thanks

Bye
Luca

2011/5/3 Roberto Imai <rob...@imlogo.com>

[Paulo Hanashiro]

Hi Luke.

The order does not matter, as the sockets are 1-wire interface. All 3 sockets are connected together.

You can check the extension cable, maybe connecting another sensor on it.

[LukeLuke]

I don't understand.

How make the controller to know wich probe is for wather, room or other ?

There isn't a sequence....

For example, before this problem my probe is so:


PH     T3  T2  T1

Now, if i connect the probe T1 (wather) to the last socket at right of the PH socket, the value is ZERO.

If i connect it on the center socket is ok

PH     T3  T1 T2

Is normal ?

Bye
Luca

2011/5/4 Paulo Hanashiro <paulo.h...@gmail.com>