redsleeve-users

Hi List, I was at 80% of building 8.4 when 8.5 was released upstream ... At that point I made the

On Sat, Sep 25, 2021 at 5:30 PM Jacco Ligthart <jacco@redsleeve.org> wrote: On 9/25/21 11:58,

@Gordan, do you have some idea about usage of 7 and/or 8 ? Closest I can get you is the number of

Hi Jacco. Looks like raspberrypi4-kernel-devel-5.4.77-v7l.1.el7.armv5tel is not 100% compatible with

Or boot with selinux=0, run restorecon -rv /, and reboot again, that should cure selinux related boot

Great stuff, thanks Jacco. On Fri, Nov 20, 2020 at 10:54 PM Jacco Ligthart <jacco@redsleeve.org

Since EL6 is going EOL in the next 2 months, it seems like a pertinent question to ask here - is

Watch out for the grub and UEFI shim bugs - this week's update consistently bricks my lab

I finally had to take the plunge myself in getting PCIe cards and disk controller specifically

Hi Bjarne, Looking through my mail, I realized I did not yet answer your mail. One of the issues is

Not off the top of my head. Where does your config file come from? Does your old config for el6 / el7

The build box in question is ancient and long gone. I don't seem to have that src.rpm anywhere,

Hi Bjarne, Today I released 7.7. I've been busy with that and have not yet looked closely at 8. I

On Sun, Sep 22, 2019 at 7:27 PM Bjarne Saltbæk <arnebjarne72@hotmail.com> wrote: Hi Gordan. I

On Sep 20, 2019, at 19:32, Gordan Bobic <gordan@redsleeve.org> wrote: When it comes to RH,

On Sun, Sep 15, 2019 at 7:45 PM Jacco Ligthart <jacco@redsleeve.org> wrote: I have seen the

Thanks guys, both your solutions worked. Jacco, you called it spot on, I was in fact missing the

Hi all, Since it turns out that CentOS 7 is of questionable usability on ARMv7 without NEON such as

Guys, Not looking for suspects, but 195.54.192.103 just did a full mirroring pull from the primary

Yes, it is armv7hl. It was mainly intended for testing purposes, not for building against. I'll

I'm going to try it at least with the biggest of the memory hogs, such as KDE, Gnome, Firefox,

Not sure which issue you refer to, there are multiple in that threat. However, what I can see from my

I finally managed to make some headway with this, specifically in setting up mock. TIL: To build

Hi Jacco. Yes, new firmware is needed before the RPI4 will boot. Also the kernel image must now be

Yes, I saw the conversation. But the redsleeve issue is different. Firefox needs rust to build. And,

Hi Bjarne, It is building right now. gcc took ~ 22 hours last time. I hope to have this on the

Hi Gordan. >What is the difference supposed to be? Not sure, I think the HC is ment as a

Hi Bjarne, The only thing that is in that logos-httpd rpm is a poweredby png. Just install the rpm

Yes I know, but I'm not at that stage. I'm still busy with "build 0" (I was going

Hi. I needed screen for EL8 so I have compiled it and shared it at https://www.saltbaek.dk/rpms/epel/