Welcome to the Receiver Development Platform group!

This is the place to participate in, or simply observe, the efforts of the loose-knit group of radio enthusiasts working to create an open and flexible hardware/software platform for the development of radio receivers.

From the outset, the goal of this project was to develop a set of easy-to-build (or pre-assembled) circuit boards, and open-source software, that can be used to construct a device that would speed up and simplify the task of building, testing, and implementing new receiver designs. The idea was to use the Si5351 to generate up to three independent clocks for use as VFO, LO and BFO in receiver designs. But, in theory, any project (not just receivers) requiring up to three flexible and configurable clocks might utilize this platform.

An initial application of the Receiver Development Platform is to develop a dual-band ARDF receiver, capable of competition-level performance operating on the 80m (3.5 MHz) and 2m (145MHz) Amateur Radio bands. The ARDF receiver project will be used to identify, implement, and test the requirements for the Receiver Development Platform.

About this forum...

Everyone is welcome, and everyone can view and post. As long as there is no spam or abuse, this forum will not be moderated.

Receiver Design Documentation

NZ0I