Router lift for Hitachi M12V?
Olebiker
in my router table for several years and would like to have a lift
device, but they are a little pricey and I want to hear from someone
who has had a positive experience.
Dick Durbin
Tallahassee
David Lawler
is really nice, and it has gotten a lot of good reviews. But I can't find
it for less than $90!
I'm thinking about putting it on mine. Let me know what you come up with.
"Olebiker" <ddu...@tfn.net> wrote in message
news:1111193957.5...@l41g2000cwc.googlegroups.com...
LP
Dick
The Woodpecker plunge lift is about as good as you can get and the
price isnt too bad at $129.95.
http://www.woodpeck.com/plungelift.html
My own router is a Bosch 1619 but they also have one specifically for
the Hitachi M12V. The mechanism is very smooth and solid, and cranks
easily from above the table. The plate is 3/8 aluminum and quite
rigid. You'll probably want to purchase the 2" insert to go along
with the 3 that come with it. By removing the inserts altogether you
can swing 3-1/2" panel raisers with no problem. All in all I consider
this to be one of my better acquisitions.
Nope, no affiliation, just a satisfied woodbutcher.
arw01
hitachi). It took me a bit longer then instructions, however it was
easy. I use this on my router all the time in the table. My "insert"
is two pieces of 1/4" hardboard glued together and drilled out. If it
flexes I don't see it. Cost was basically $2.00 worth of scraps.
You can still plunge the router with the router razer, so if you want
to take it out of the table it is an option.
Alan
nospambob
and would do it again.
Joey Bagah
Well, wood Pecker,,, (mask and gun not needed) is getting 300 plus for there
lift,, razor is gettng 90 dollars for a few nuts and bolts but all needed for
it to work,, (read overpriced) so back to the old way until I win the Lottery
--
for full context, visit https://www.homeownershub.com/woodworking/router-lift-for-hitachi-m12v-2721-.htm
J. Clarke
<caedfaa9ed1216d60ef...@example.com> wrote:
>replying to LP, Joey Bagah wrote:
>Well, wood Pecker,,, (mask and gun not needed) is getting 300 plus for there
>lift,, razor is gettng 90 dollars for a few nuts and bolts but all needed for
>it to work,, (read overpriced) so back to the old way until I win the Lottery
k...@notreal.com
>Well, wood Pecker,,, (mask and gun not needed) is getting 300 plus for there
>lift,, razor is gettng 90 dollars for a few nuts and bolts but all needed for
>it to work,, (read overpriced) so back to the old way until I win the Lottery
>
though.