rec.sport.skating.inline Frequently Asked Questions (Part 1 of 20)

1 view
Skip to first unread message

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part1


_r.s.s.inline FAQ: General Q and A_
_________________________________________________________________

[LINK] -->

GENERAL QUESTIONS AND ANSWERS

Frequently Asked Questions for Rec.sport.skating.inline

(last changed Monday, 19-Aug-96 09:44:30 MDT)

This Frequently Asked Question (FAQ) file is Copyright © 1995 by
Anthony D. Chen and is made available as a service to the Internet
community. It may not be sold on disk, tape, CD-ROM, packaged or
incorporated with any commercial product, or published in print,
without the explicit, written permission of the copyright holder.

License is hereby granted to redistribute on electronic or other media
for which no fees are charged (except for the media itself), so long
as the text of this copyright notice and license are attached intact
to any and all republished portion or portions.

Disclaimer: This file is presented with no warranties or guarantees of
ANY KIND including correctness or fitness for any particular purpose.
The author(s) of this material have attempted to verify correctness of
the data contained herein; however, slip-ups can and do happen. If you
use these documents, you do so at your own risk.

This FAQ may be cited as:

Chen, Anthony D. (1995) "rec.sport.skating.inline Frequently Asked
Questions (FAQ)" Usenet rec.sport.skating.inline, available via
anonymous WWW: http://www.skatefaq.com


_________________________________________________________________

Table of Contents:
* Q: What is the difference between in-line skating and
"rollerblading"?
* Q: What are the origins of in-line skates?
* Q: I'm interested in getting a pair of in-lines for outdoor
skating. I want to get decent stuff, but I'd rather not spend a
lot of money. What do I need to get?
* Q: Are buckles better than laces?
* Q: I want to get good in-lines, but I can only afford $150.
* Q: I'm considering getting used skates. What do I look for?
* Q: How do I stop on in-lines?
* Q: I've learned how to slow down. how do I go faster?
* Q: How do I learn to skate backwards?
* Q: What sort of maintenance do I have to do on my in-lines?
* Q: How do I handle dogs chasing me while skating?
* Q: What can I do to help prevent skating bans?
* Q: What other information is out there to help me with in-line
skating?

* Glossary of Inline Skating Terms

(Compiled and authored by Tony Chen, Phil Earnhardt, and George
Robbins.)

_Q: What is the difference between in-line skating and
"rollerblading"?_


_A_: In-line skating is the official term for the sport
commonly called "rollerblading" or simply "blading". The
commonly misused term of "rollerblading" is due to the company
called Rollerblade. Rollerblade wasn't the first to produce
in-lines, but managed to popularize in-lines faster and farther
than anyone previously (in the States anyway). Rollerblade was
the only company in the in-line market for a long while, so
they became the marekt leader. This lead to the generic use of
the term "rollerblade" to stand for all in-lines, even if made
by different companies. This is similar to the use of
"kleenex", "coke", "Q-tip", "xerox", and other products.


__________________________________________________________

_Q: What are the origins of in-line skates?_


_A_: (Merged paraphrased text from Wheel Excitement, The
Complete Blader, and Blazing Bladers)

The first in-line model was developed in the early 1700s by a
Dutchman who wanted to simulate ice skating in the summer by
nailing wooden spools to strips of wood and attaching them to
his shoes.

The next version appeared in 1760 when a London instrument
maker, Joseph Merlin, decided to make an entrance to a
masquerade party by skating in on metal-wheeled boots while
playing a violin. He ended up skating into a huge mirror at the
end of the ballroom, not having learned to stop or steer.

In 1823, Robert John Tyers of London designed a skate called a
"rolito" by placing five wheels in a row on the bottom of a
shoe. The rolito was not take seriously at the time.

In 1863, an American, James Plimpton, found a way to make a
workable skate. He came up with a four-wheel skate with two
pairs of wheels side by side, and so the modern four-wheel
roller skate was created. Roller skates allowed turns, and also
forwards and backwards skating. The invention of ball bearing
wheels in 1884 helped the sport even more.

Tyers' design did not go entirely unnoticed however. In the
Netherlands, after the canals had melted, "skeelers" (5's) were
used as a means of dry-land cross training, competition and
transportation for over two decades.

Finally, in 1980 when two brothers from Minneapolis were
rummaging through a pile of equipment at a sporting goods
store, they found an old in-line skate. Scott and Brennan Olson
were ice hockey players and so they realized the cross-training
potential of the in-line skate.

They redesigned the skate, using a hockey boot, polyurethane
wheels and adding a rubber heel brake, and found they could
skate as they did on ice. Soon after, they began selling skates
out of their home and eventually Rollerblade Inc. was born.

_(end paraphrased text)_

There were also some Soviet in-lines from around the same time.
These in-lines were being developed for Speed Skating dryland
training. Besides having inferior wheel material, they only had
a single bearing cartridge in each wheel.

The first mass-produced Rollerblade skates had two-part metal
runners. The smaller skates had more overlap between the two
metal parts; the large skates had less. The "bushings" were 4
plain vanilla washers per wheel; they were cumbersome to
assemble/remove and mechanically flawed: dirt/sand would get
between the inner washer and the bearing. Also, there was just
a washer's worth of clearance between the rail and the wheel:
it was very easy to trash a wheel by rubbing it against a rail.
The holes along the side of the runners were oval; the rock of
the skate was determined by how much you slid the bolt up or
down when you tightened it. Finally, the brakes were old roller
skate toe stops -- they were not very efficient.

The first massively successful Rollerblade skate was the
Lightning. It had a robust fiberglass runner for each size of
skate. The bushings fit into oval holes in the runners -- rock
was set by whether you put the bushing in up or down. The
linkage between the wheel and runner was far more mechanically
efficient and there was no way to rub wheels on the runners.
Wheel removal/insertion was far easier. And Rollerblade's
brake, while far smaller than the old "toe stop" brake, was
much more efficient and lasted longer.


__________________________________________________________

_Q: I'm interested in getting a pair of in-lines for outdoor skating.
I want to get decent stuff, but I'd rather not spend a lot of
money. What do I need to get?_

(See the Buying Guide for Inline Skates for more in-depth
tips.)


_A_: First off, your budget should include protection: knee
pads, wrist guards, and a helmet. Elbow pads are optional.
These "pads" should have a hard plastic shell -- they should
slide on the asphalt when you fall. Good brands of protection
are the Rollerblade TRS or the Dr. Bone Savers (DBS) set of
accesories. For helmets, any well-fitting ANSI/Snell approved
bicycle helmet should be fine.

The in-line industry is a lot like the bicycle industry --
specialty shops generally sell and support more expensive
functional skate brands and department stores generally sell
inexpensive lines that will never work well. Also, there's
usually a much greater chance of getting spare parts and
service from a specialty shop than a department store.

Rollerblade is the best-known brand of in-line skate; they make
a whole family of different in-line skates. Any skate in
Rollerblade's line at or above the Lightning skate should work
well and last a long time. Other reputable manufacturers are
Ultra Wheels, Bauer, Roces, and K2.

You may wish to rent a model of skates before buying. Some
shops will discount part of the rental from purchase price if
you buy skates later.

The fit should be comfortable but snug. Unlike hiking or
running shoes, it's OK for your toes to be loosely in contact
with the front of the boot.

Unless you have a background of speed skating, beginning
skaters should avoid the 5-wheel skates. The problem with isn't
the inherent speed of the skates, but since manueverability and
flexibility are sacrificed for the sake of racing performance,
so turns and other maneuvers require more commitment. The
5-wheelers are great fun, but master the fundamentals on a
shorter wheelbase first.


__________________________________________________________

_Q: Are buckles better than laces?_


_A_: If you're looking to buy skates nowadays, you'll notice a
wide variety of support systems: laces only, laces with one
buckle, one buckle (rear-entry style), two buckles, three
buckles, or maybe even a multitude of straps like in K2 skates.

Hockey skates are usually laces only. 5-wheelers come in
various types: laces only, lace and one buckle, or multiple
buckles (typically recreational 5-wheelers).

The issue of buckles vs. laces is still a fairly often debated
subject, and the bottom line is whatever works for you. Anyway,
here are some good and bad points of each support system
(recreational skates only).

Buckles:
o PROs
1. Faster to put on.
2. More durable.
3. Adjustable on the fly.
4. Allows for vented shells.
5. Maintain their hold, no loosening.
6. Possible to adjust support in separate areas.


o CONs
1. More expensive (in general).
2. Can cause too much pressure on parts of the foot.


Laces:
o PROs
1. Cheaper (in general)
2. Much less prone to point-loading pressure on
specific spots, pressure is distributed evenly.


o CONs
1. Slower to lace up than to buckle up.
2. Prone to breakage.
3. Cannot easily adjust tension without stopping and
re-doing the whole thing.
4. Laces don't allow for much venting in the shells.
5. They eventually loosen while you skate.
6. Not very easy to adjust support in sparate areas.


Laces & buckles:
o PROs
1. Support adjustment is easy (if you normally only
adjust the ankle).


o CONs
1. Laces don't allow for much venting in the shells.


o NEITHER
1. Mid-range pricing.



Buckles may seem like they've got a lot of good points going
for them, and they do. However, the two bad points can be big
ones. Cost is the most obvious factor. If you can't afford
buckle skates, you'll likely have to settle for laces only,
and/or add your own. The other factor is fit. If the skates
don't fit you quite right, the buckles can cause over-pressure
on certain parts of your feet. Fit is one of more important
aspects of choosing a skate, and while liners of most skates
eliminate this point- loading problem to a good extent, it may
not be enough for some people.

So what can you do if you've got lace-only skates and want to
have the convenience of buckles but can't afford to buy a new
pair? You might consider adding buckles. Either adding one
buckle at the ankle or doing away with laces altogether and
adding two or three buckles. Many ski shops will be willing to
do this for you. Or you can add your own.

To retrofit buckles onto your skates:

From: holr...@student.tc.umn.edu (James A Holroyd-1)

Need:
1) Buckles: can be obtained at ski shops, snowboarding shops, or
from an old pair of ski boots. I got mine from a snowboard shop,
sold as an extra buckle kit for snowboard binding ankle straps.

** NOTE ** Make *sure* the mounting surfaces of the buckle are only
slightly curved. Too much curvature in this area (the bit that
touches the boot) will pull your boot out of shape and be very
uncomfortable.

2) Drill with various bits.

3) Mounting hardware for buckles: you can rivet them, or use
T-bolts. I used T-bolts with loctite on the threads, and they stay
on well.

Step 1.
Put your skates on and figure out where you want to put
the buckles. I would recommend leaving the eyelets for
the laces accessible. This way, you can still lace up
your skates, then tighten the cuffs with your buckles The
laces sit behind the strap, and don't loosen up as much
as if you leave them tied off below the cuff. Remember to
place the buckles far enough apart so you can tighten
them, but not so far that you can't get the tongue into
the ratchet.

*** IMPORTANT *** The buckle levers go on the *outside*
of the skate :) This is very embarrassing when you get it
wrong (I did, first time), as every time your skates get
close together, they either catch on each other or
unlatch the lever, or some combination of the two. Not
pretty.

Step 2.
Mark where you will have to drill holes to mount the
buckles.

Step 3.
Take the liners out of the boots and drill the holes.
Start with a small, sharp bit (that boot plastic is
*tough*, it could take a while) and work up to the size
that accomodates the mounting hardware you're using.

Step 4.
Mount the buckles. If you are using the snowboard
buckles, the mounting hardware that came with them should
work. Just make sure that nothing sharp is sticking into
your liner, as it could chew up the liner and/or your
ankle. Don't forget the loctite (although it's really not
critical until you've got the placement right, or until
you're 10 miles from home :) )

This method works great with my lightnings. I got a pair
of skates that, IMHO, are as good as those costing a lot
more. However, I would not try this trick with any of the
skates with flimsier liners. The Zetra's are pretty
uncomfy after a while, as the edges of the cuff do tend
to dig in. I ended up putting extra foam padding
(ensolite) around the ankle area before I sold them to a
friend. He took it out, and apparently has no comfort
problems. Your mileage may vary.

Buckle add-on kits are now being sold in skate shops
specifically for in-lines. They run about $20 or so per
pair of buckles. Ask your local skate shop or call up one
of the mail-order shops in the FAQ.


__________________________________________________________

_Q: I want to get good in-lines, but I can only afford $150._ (See
also the Buying Guide for Inline Skates)


_A_: At this price point, you'll have to be pretty resourceful.
First, note that the in-line "season" begins somewhere around
the end of March. You'll probably find some good bargains in
stores in the Jan-Mar time frame. Like many sports, the in-line
market is style-oriented: you may find last year's style at a
huge discount.

Even at this price level, you should avoid "department store"
skates (unless you want to buy skates that you won't use).
You're far better off buying a pair of used Rollerblade
Lightning skates. If you don't see anyone selling your size,
consider putting an ad advertising that you want to buy skates.

Make sure to get pads too. Don't skimp on protection! A knee is
a terrible thing to waste. Used protection in good condition is
fine.


__________________________________________________________

_Q: I'm considering getting used skates. What do I look for?_

See the Buying Guide for Used Skates
__________________________________________________________

_Q: How do I stop on in-lines?_ (see also, the stopping file, for more
details)


_A_: Good question. You've taken the most important step --
realizing that there is a need to be able to slow down. The
rest is just practice.

There are several general techniques for stopping while
remaining on your skates: generating friction by dragging your
brake pad, generating friction by sliding your wheels laterally
against the ground, jumping onto grass and killing your speed
by running out, and pushing against a slower-moving or
stationary object with your hands.

I finally learned how to brake well when someone described this
image: your brake foot has just slipped on a banana peel.
Whoops! Your brake foot will be about a foot in front of your
body. The leg will have a slight bend. The rear wheel and the
brake will be in contact with the ground.

At first, your non-brake foot will be bearing almost all your
weight. That leg will be directly under your body, and the knee
will be bent. The amount of bend in your knee will determine
how much braking force you can apply.

Your feet should be very close to your centerline. This should
help keep you going straight forward when braking (pretty
important!).

There should be a slight forward bend in the waist. It may also
help to keep the hands at waist height or so. This keeps your
center of gravity lower. Try to keep your hands (and your whole
upper body) loose; clenched fists do not make the brakes work
any better! Relax.

After you've tried a dozen or so stops, add one more
refinement: drive your back knee into the back of the front
knee while braking. This creates a triangle with your lower
legs and the pavement between your skates. As all the
Buckminster Fuller fans out there know, triangles provide
structural stability. This triangle should enhance your braking
power and ability to run smooth, straight, and true while
stopping.

As you master braking, begin to shift more of your weight to
your front foot. The Masters of Speed Control can actually
decelerate while standing only on their front foot. Good trick,
that.


__________________________________________________________

_Q: I've learned how to slow down. how do I go faster?_


_A_: First off, keep learning how to slow down! Learn new
techniques; refine the ones you already know. Until you master
slowing down, your mind will limit how fast it will let you go
on skates.

Watch good skaters. Notice that they rarely have both skates on
the ground at the same time. This independent leg action is
something you'll master over time; you can practice by seeing
now long you can glide on a single skate. When you can glide on
a single skate for more than 30 seconds (both left and right
legs!), you're well on the way.

Notice that almost all of the side-to-side motion is happening
below the waist. Eliminate any twisting motion in your
shoulders -- keep your shoulders square to your direction of
travel. If you want to move your arms, move them forward and
back -- crossing patterns may have you twist your shoulders.
Relax the muscles in your lower back to allow your upper body
to remain quiet.

Watch your stride. Are you pushing more to the side or to the
back? Shift your stride to be pushing almost exclusively to the
side.

Where do you set your skate down at the start of your stride?
Shoulder width? Start setting your skate down on the centerline
of your body. After you're comfortable with that, start setting
your skate further in beyond your centerline.

Do you flick your toe at the end of your stride? If so, stop.
Instead, flick your heel -- drive your heel out at the end of
the stroke. This will feel very strange for the first 10,000 or
so times.

Relax. Then relax some more. Discover levels with levels of
relaxation. Travel fast while moving your skates slowly -- your
body is swimming through air. Consider beginning to practice
T'ai Chi Ch'aun postures daily. Relax some more.


__________________________________________________________

_Q: How do I learn to skate backwards?_
See part 2.1 of the FAQ
__________________________________________________________

_Q: What sort of maintenance do I have to do on my in-lines?_ (See
also: part 4 of the FAQ)


_A_: Things that need maintaining are the wheels, bearings, and
brakes.

Wheels sometimes need rotating to keep the wear on all the
wheels even. To rotate a set of wheels, you simply move wheels
to different positions. The swapping scheme you use it ups to
you. Some people have a set rotation they always do (wheel #1
-> #2, #2 -> #3, #3 -> #4, etc.) and some people just try and
place the wheels so that the wear is more evenly distributed.
Do what's best for you.

For your bearings, practice preventative maintenance: avoid
sand, dirt, and water as much as possible. These nasties are
what cause bearing failure. If you want bearings to last,
vacuum in/around your runners with an upholstery accessory
after every skating session. If you do want to (or have to)
skate in sand/dirt/water/mud, get a set of sealed bearings.

Buy a Rollerblade "Y" tool to remove bearings from spacers, or
buy one of the aftermarket bearing spacer kits. These make
bearing removal much easier.


__________________________________________________________

_Q: How do I handle dogs chasing me while skating?_
(From George Robbins)

On the physical side
Many people recommed a bicycle style water bottle, dogs
tend to be confused/diestressed by getting a spray of
water in the face. Since you can spray from a distance,
this is generally safe and the bottle is also useful for
you own refreshment.

On the psych-warfare side
Threaten back by either skating directly towards the dog
or making some kind of striking/throwing motion with your
arms, preferably with a stick or some kind other sort of
safety extension. Dogs generally thtreaten potential
territorial invaders and become more or less agressive
depending on the response.

On the chem-warfare front
Some people recommed mace or other chemical deterrents.
These will cause the animal severe pain, so be sure that
the dog is really threatenting and not just putting up a
noisey territorial display. Also don't rely on these
100%, since while skating you may miss or the dog may
attack anyway, so be prepared to strike and run. Some
folks also recommend ammonia in the water bottle, but
make sure you don't get confused and take a sip.

On the legal front
Take note of what property the dog seems to be defending
and it's description, especially collars or tags. If
you're in an area with an enforced leash law, don't
hestitate to report the animal. If not, you can still
report the dog to the police, sheriff or animal control
authorities, especially if it did physically attack
and/or bite you. This may or may not get a positive
response, but the owner *is* legally responsible for
keeping his animals under control and one that attacks
you today may attack child skater or cyclist tomorrow.

On the other side
Be prepared to sprint through or away from the dog's
territory. Motions or sounds will attrace the dogs
attention, but they usually won't chase seriously beyond
a predetermined territory. Keep your arms up/close to
your body, so that if the dog does try to bit it will
probably and up with a mouth full of boot. If the dog
does bite an break your skin, clean the wound immediately
and seek medical attention.


__________________________________________________________

_Q: What can I do to help prevent skating bans?_

Some Common Sense Approaches For Avoiding Skate Bans



A Letter For Skaters (from Dave Cooper at IISA) As more and
more in-liners take to the roads and paths of this great
country, encounters between skaters and the civilians (any
non-skater) become more likely. Cities, parks and educational
institutions are taking a second look at in-line skaters and
asking whether they can abide by wheeled beings plying their
pavement. In large measure, their decisions to give in-liners
the green light are formed by the image they have of the local
skate talent. Here are ten common sense things you can do to
get out in front of the restrictions in your community. By
presenting the image of a sane and reasonable collection of
carbon molecules you might avoid future unpleasantness:

1. _Skate Smart_ - Build the image of the in-line skater as a
safety conscious individual.
2. _Align With The Bicyclist_ - Bikers are pursuing a legitimate
sport, let this rub off.
3. _Sponsor Family Days_ - Any time Grandma and the kids do
something...it must be o.k.
4. _Skate With Community Leaders_ - Most have always "wanted to
try it" Educated them.
5. _Offer The Law Enforcement Community Help_ - Extra eyes for
the police, our friends.
6. _Sponsor Safety Clinics_ - Who knows, you might even get
paid.
7. _Attend Regulatory Meetings (Traffic, City, School)_ - Wear
your nice clothes.
8. _Sponsor A School Program_ - Get the educators behind the
movement.
9. _Visit The Rental Shop_ - Help them have safe customers.
10. _Police Yourself_ - Organize (or don't), but make sure
skaters obey the right laws at the right times.



Remember that the sport of in-line skating is very cool, very
fun and can be quite wacky, but as a role model for the
beginner we all have a responsibility to execute our stranger
and more dangerous maneuvers out of eye and camera shot. By all
means, push the sport, make the best of your skate, but also
Skate Smart, Skate Polite and, when appropriate, skate stealth.


For more information on specific programs that can help your
area - please contact the IISA,
http://www.sportsite.com/mac/allshop/sgma/iisa/html/iisa_hp.ht
ml.

Dave Cooper
International In-line Skating Association
Government Relations Committee
http://www.sportsite.com/mac/allshop/sgma/iisa/html/iisa_hp.htm
l
__________________________________________________________

_Q: What other information is out there to help me with in-line
skating?_


Here's a list of inline skating magazines out there: InLine
Subscriptions Dept.
P.O. Box 527
Mt. Morris, IL 61054
or call customer service at 1-800-877-5281
jw...@aol.com, Inline Magazine, Natalie Kurylko, editor
http://triadcom.com/inline/, Anne...@aol.com

Speedskating Times
2910 NE 11 Ave
Pompano Beach, FL 33064
(305) 782-5928

Daily Bread
280 Highland Rd.
Laguna Beach, CA 92651
(714) 497-2636

Box Magazine
818 Lincoln Blvd.
Slab 103
Venice, CA 90291

Roller Hockey Magazine
12327 Santa Monica Blvd. Suite 202
Los Angelas, CA 90025
phone 310-442-6660
fax 310-442-6663
9 per year @ $20

Inline Skater
4099 McEwen, suite 350
Dallas TX 75244-5039
E-Mail SKA...@FLC.MHS.COMPUSERVE.COM
6 per year @$17.95

Global Skate
PO Box 8400-361
Westminster, CA 92683
E-mail GLOB...@AOL.COM
4 per year @ $8

Inline Retailer
2025 Pearl St.
Boulder, CO 80302
303-440-5111
fax 303-440-3313 12 per year @ $30, or free to qualified
dealers

Inline Skater (http://www.xcscx.com/skater/) There are several videos
that are marginally good at training. One of these is the
Rollerblade/Ski Magazine Skate to Ski video. Your local Rollerblade
dealer should have training videos available for viewing in the store
and/or rental.


_________________________________________________________________

_Reading list:_ (mini-reviews by George Robbins)

See also George's Skating Book FAQ
http://www.netaxs.com/people/grr/Roller/ which covers books for all
types of skating (roller, ice, inline).

Blazing Bladers by Bill Gutman
A Tom Doherty Associates Book, 1992.
Cover price: $6.99 ($7.99 CAN)
ISBN 0-812-51939-6

One of the two easier to find books, this provides a reaonsable
overview of the sport, but suffers somewhat from "generic how-to"
publishing. The author tends to recite what "experts" have told him
without much conviction and some of the photographs don't fit well
with the text. Still has a good section on "street tricks".

The Complete Blader by Joel Rappelfeld
St. Martin's Press, NY, New York, 1992.
Cover price: $8.95
ISBN 0-312-06936-7

This book is nearly as good as _Inline Skating_, but is more oriented
towards fitness/health aspects. There seems to be as much space
allocated to stretching and conditioning as skating. One useful
section describes construction and use of a slide-board for off season
training.

The Complete Guide and Resource to In-line Skating
by Stephen Christopher Joyner
Betterway Books, Cincinnati OH - 1993
Trade Paperback, 176 pages, $12.95
ISBN 1-55870-289-X

As a resource guide, this is a useful book, the appendices list
Magazines, Manufacturers, Retailers, Organizations, Roller Hockey
Leagues, IISA certified instructors and also a rather eclectic
bibliography. The rest of the text is OK and has a few interesting
features, but either of the first two in-line books (The Complete
Blader and Inline Skating) mentioned above would be more useful,
especially for the beginning skater. Some Specific irritations are
only the briefest mention of roller hockey where I would exepect at
least an information presentation of rules, equipment and game play,
and a strong anti-quad bias including a history of skating which leaps
from Plimpton's error (a steerable truck quad skate) to Scott Olson's
Rollerblade as if no-one enjoyed skating in the interiem.

Inline Skating by Mark Powell & John Svenson
Human Kinetics Publising, 1993
Trade Paperback, 134 PP, $12.95
ISBN 0-87322-399-3

Of the recent rash of in-line skating "how to" books, this is probably
best and most balanced one. It has good coverage of equipment and
basic skating skills, mention of dance and fun skating, and doesn't
suffer from any fitness obsession.

Laura Stamm's Power Skating by Laura Stamm
Leisure Press, 1989
Cover price: $17.95
ISBN 0-88011-331-6

Wheel Excitement by Neil Feineman with Team Rollerblade(R)
Hearst Books, New York, NY 1991.
Cover price: $9.00
ISBN 0-688-10814-8

At one point, this was the only book on in-line skating and it still
serves as a decent introduction to the sport. Lots of pictures of
California kids having a good time. The actual text is a little thin
and any of the above books are better if you can find them in your
area.


_________________________________________________________________



INLINE SKATING GLOSSARY



_ABEC:_
Stands for Annular Bearing Engineer Council. The ABEC-1,
ABEC-3, ABEC-5 ratings you see for bearings are supposed to be
indications that the bearings meet the stated ABEC
specifications of a certain precision level. ABEC-5's are
supposed to be fastest but there is yet no hard evidence that
in real world situations that this is true.

_bearings:_
These are those metal things inside the hub of your wheels.
There's two per wheel. Inline skates currently use bearings
that were already standard in the bearings industry, before
inlines were popular. They are "608" bearings, indicating the
inner (6mm) and outer diamters (8 mm).

_bearing spacers:_
These are those small parts that go in between your bearings so
that the axles can go through your wheels. Most stock spacers
are plastic, some may be metal. Hop-up kits provide metal ones.
Some spacers may also be threaded (so that axles screw directly
into the spacers instead of just passing through).

_anti-rocker:_
This is a wheel configuration used by many rail-sliders which
has the larger wheels on the toe and heel positions, and the
smaller wheels (like Lil' Roxx or Midgets) in the middle to
allow the sliding to take place without the wheels being in the
way.

_bashing (stair bashing):_
A synonym for stair riding. Also sometimes called "stair
bumping".

_crossovers:_
Skating crossovers is simply skating along a curved path while
still stroking. To do this, you have to cross the outer skate
over the other one and hence the term "crossover". Done
properly, a crossover will not only let you maintain your speed
going into the turn, but also let you increase it to an extent.
The turns that ice speedskaters do during the Olympics are all
crossover turns. Figure skaters will often do backwards
crossovers during their routines, and hockey players do a
variety of both during games.

_durometer:_
Durometer is an industry hardness rating for polyurethane,
which is the primary wheel material. Ratings such as 78A or 85A
are usually seen on wheels. The higher the rating the harder
the wheel. 100 is the highest (although no skaters probably go
beyond 92 or 95).

_frame spacers:_
These are those small parts on your skates that go between your
wheels and the runners. Many skates have eccentric, oval shaped
frame spacers so that you can flip them 180 degrees to rocker
your skates.

_fakie:_
A prefix used for any trick done backwards, as in a "fakie
360".

_grind plates:_
These are flat metal or hard plastic plates that are bolted on
to runners for grinding and rail slides so that the original
runners won't get shredded to pieces.

_hop-up kits:_
Hop-up kits are simply upgrade kits that include frame spacers,
bearing spacers, and axels. They're made of aluminium or brass
or some other metal. Some incorporate threaded spacers too. The
advantage in using hop-up kits is that you can crank down real
hard on your wheels without compressing the spacers. The stock
plastic spacers on most skates will compress or even crack if
you do this a lot.

_monocoque:_
This means the entire skate (boot and runners) is
manufacturered in one solid piece. This can produce a lot more
stiffness in the skate, which may or may not be good, depending
on your skating style and purpose.

_rail slides:_
This is a skating trick where you slide along a rail in various
stances. Most often an anti-rocker or all-small-wheel setup is
used in order to let the runners slide along the rail. It wears
down plastic runners fairly quick so rail sliders usually put
on grind-plates on their runners.

_road rash:_
Any scrapes, gashes or other injuries incurred from wiping out
and sliding on pavement.

_rockering:_
Rockering your skates means to arrange the wheel heights to
approximate a curved (ice skate) blade. Normally this is done
by raising the front and rear wheels slightly by flipping the
frame spacers, or by lower the middle two wheels, or by doing
both. Rocker provides for much more responsive turning at the
cost of some stability.

_skitching:_
Skitching comes from "skate hitching". Skitching is simply
hanging on to some moving vehicle and letting it pull you
along. Potentially dangerous of course.

_stair riding:_
This is a common skating stunt where you literally ride down a
set of steps. It's bumpy, but with the proper stance and
balance it's pretty fun. Always use protective gear when doing
this!!!

_wheel rotation:_
Polyurethane wheels eventually wear down, but you can often
extend the life of your wheels by flipping and/or rotating your
wheels amongst themselves so that you can skate on the
less-worn areas of your wheels.


_________________________________________________________________



_General Info_ _Techniques_ _Marketplace_ _Where to Skate_ Index
FAQs
Glossary
Wheels/Bearings
Clubs/Orgs
Rollerhockey
Quotable rssi Posts
Stopping
Grinding
Vert/Jumps
Slaloms
Figure Skating
Racing
Buying Guide
Used Skates Guide
Companies/Shops
Skate Reviews
Other Reviews
Western
California
Central
Northeast
Southeast
Abroad

_________________________________________________________________


_________________________________________________________________

Copyright © 1991-1996 Anthony D. Chen (adc...@skatefaq.com)

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part2


_r.s.s.inline FAQ: Techniques - Stopping, backwards skating, etc._
_________________________________________________________________

[LINK] -->

TECHNIQUES - STOPPING, BACKWARDS SKATING, ETC.

(last changed Monday, 03-Jun-96 07:22:58 MDT) Table of Contents:
* Stopping Techniques
* Skating Backwards
* Skating Downhills (and surviving)


_________________________________________________________________

The In-line Stopping Techniques File



(originally written February 1992)

_________________________________________________________________



Copyright notice
_________________________________________________________________

NOTE: This list is arranged in order of increasing difficulty as per
my experience. Your experiences WILL undoubtedly vary from mine. This
list does not purport to be the definitive list of stopping
techniques, but it does strive to be as complete and descriptive as
possible.

It is not expected that everyone will learn, or even want to learn,
all the methods discussed in this file. It is simply a catalog of
techniques to choose from. Some techniques require more flexibility,
some require more finesse, and some require more guts 8-)

Good luck, and skate smart.

_-Tony Chen (adc...@skatefaq.com)
_
_________________________________________________________________

List of stops:

Beginner level
* runouts
* wall stop
* windbraking
* the brake-pad
* V-stop/snowplow

Intermediate level
* advanced runouts
* (regular) spinout/lunge stop
* spread eagle spinout
* crossover stop
* slaloming/parallel turns

Advanced level
* T-stop (includes a picture tutorial)
* toe drag
* backwards T-stop
* Stepping stops
+ backward stepping stop
+ forward stepping stop
* reverse stop (forwards snow-plow)
* backwards heel drag
* toe-drag spinouts
* heel-drag spinouts
* curb ramming
* power stop/power slide (includes a picture tutorial)
* chop-stop
* New York stop
* "Wile E. Coyote" stops

Combination stops

Related topics:
* falling
* collisions with stationary objects


_________________________________________________________________

The basic repretoire of stopping techniques includes the brake-pad,
the T-stop, spinouts, and the power slide. This file should help you
learn those basics and more. The basics should always be learned
first, but once you progress beyond them, you'll likely want to learn
different and/or more advanced techniques. This compilation should
help guide you through this progression.
_________________________________________________________________

BEGINNER LEVEL

Most beginner skaters should be able to handle the following set of
stopping methods. These techniques keep both feet on the ground
throughout the stop, and don't require fully independent leg action.

_RUNOUTS:_
If the path you're skating on has grass or packed dirt you can
just skate off the path onto the grass/dirt. This will reduce
your speed somewhat but watch out for the sudden change in
speed! (hop-hop-hop-hop-hop). If you are truly out of control,
at least you'll tumble in the grass and not on the road.

_WALL STOP:_
To do this stop, simply skate towards a wall (or any reasonably
stationary object, really) and use your arms to absorb the
impact. At low speeds, this should be quite safe (make sure you
turn your head to the side so as not to smash your face).

You may or may not bang your skates, depending on your speed
and how you hit. The key is to use your arms as cushioning
springs (like doing a standing push-up.) One way to practice
this is to stand a few feet from a wall (with your skates on).
Now fall forward on your hands against the wall. You should be
able to bounce slightly, while still avoiding banging your
head. The faster your approach, the less bounce you can expect.


A variation on the wall stop is the billiard ball stop. Instead
of stopping against an object, use a fellow skater to push off
and transfer your momentum to them. To be safe, warn the
receiving person about your approach. It works well on flat
surfaces and at low to moderate speeds. It's not recommended at
high speeds and especially on people you don't know 8-)

See the collision section for more extreme cases.

_WIND-BRAKING:_
Wind-braking is more for speed-control than outright stopping
(although on windy days, wind-braking can stop you). Just stand
up, spread your arms out and catch the air like a sail. You'll
probably need to lean forwards slightly, to counter the force
of the wind.

_THE BRAKE-PAD:_
The brake-pad is subject to much debate amongst skaters. Many
people with ice skating and rollerskating backgrounds find the
brake in the way, in the wrong place, or simply ineffective.
However, for those of you who actually take the time to learn
it properly, the brake-pad becomes a very versatile piece of
equipment. Here are some of the benefits:

1. you can use it to stop, even at very high speeds
2. it allows you to keep both skates on the ground while
stopping (good for keeping your balance)
3. you can maintain a narrow profile (good for high traffic
areas where cars or bicycles might be passing you)
4. you can still steer
5. the sound of braking can often alert others to your presence
6. the brake-pad is the most cost-effective technique there is
so far for in-lines



To learn how to use the brake-pad, first coast with both skates
shoulder-width apart. As you coast, scissor your feet back and
forth a few times to get used to the weight shift. To apply the
brake, scissor your skate so that your braking skate is out in
front. Lift the toe of your brake skate and press with the heel
too. Your body weight is centered and even slightly on your
back skate when you're just learning it. The key is a straight
back and bent knees.

If you have trouble balancing or find your braking ankle a
little weak, you can try the following trick: form a triangle
with your legs (from the knee down to your skates) and the
ground. This means putting your back knee either right behind
or next to, the brake-foot knee to form that triangle.

Eventually you'll want to be able to stop at high speeds.
Basically, the more pressure you use on the brake pad the
faster you stop. Maximum stopping power is achieved by putting
your entire body weight onto the brake by lifting your back
foot, and leaning onto the brake. This takes some practice but
is very effective. It is possible to stop within 15-20 ft even
when going over 20 mph. You may still want to keep the other
skate on the ground for balance, however.

Note that the amount of leverage (the amount of stopping power
you have), is partially dependent on how worn your brake is. A
half-worn brake will provide better leverage than either a new
brake or a worn-out brake. Some people saw off part of the
bottom of new brakes to avoid the annoying breaking-in period.

One important point to keep in mind when using the brake-pad:
You can still steer while braking. Just keep the brake-pad on
the ground and pivot on your heel wheel slightly to go the
direction you want. This is very useful while going down a very
narrow and curvy path or while trying to avoid curbs,
pedestrians, parked cars, trees, and the like.

A brake-pad generally runs from $3 to $6 depending on what type
you buy. Compare this with wheels which are $5.50 or more each
and the freebie stops: runouts, wind-braking, billiard ball
stop (freebies since you're not wearing anything down). Wheels
are expensive, and the freebie stops are infrequently
available, if at all, for the large majority of skating
situations. The brake should be your standard stop, provided
that you learn it well. (see "Wile E. Coyote" stops for a
rather interesting variation)

_V-STOP/SNOWPLOW:_
For a low-speed rolling stop, point your heels inward (for
backwards) or your toes together (for forwards) and let your
skates bang into each other. This might throw you in the
direction you're going (depending on your speed), so take care
to be prepared to lean forward or backwards to compensate.

You can do a more exaggerated snowplow by spreading your legs
out past shoulder-width and pointing your skates inward or
outwards as before (and you won't bang your skates together.)
Here, use leg strength to press your inner edges against the
ground, and you'll slow down appreciably. This can work even at
very high speeds.


_________________________________________________________________

INTERMEDIATE LEVEL

_ADVANCED RUNOUTS:_
Skating off pavement onto grass. You can weave from pavement to
grass and back to pavement to control your speed, especially
when going downhill. To stop completely just stay on the grass.


As you hit the grass, knees are kept bent, and one foot is
ahead of the other. Nearly all weight is distributed on the
foot that will hit the grass first, and you keep that leg real
stiff, as if plowing a path for the trailing leg to follow.
Very little weight is on the trailing leg. Muscles in the
trailing leg are relaxed. The only function of the trailing leg
is stability and balance. The leading leg does most of the
work.

Beginners are often intimidated by this procedure, but it is
really a very simple physical feat. The hard part, if any, is
simply understanding mentally what it is you are trying to do,
as I explained.

This is a lot of fun, too. I like to hit the grass full speed,
and then skate as far down a slope as possible before the grass
stops me.

One important requirement is that the ground should be dry. Wet
dirt or grass will clog your wheels and your skates will also
sink into mud (yuck).

_(REGULAR) SPINOUTS/LUNGE STOP:_
This is where you skate into a spin to transfer your linear
momentum into angular momentum. To do this, you sort of
stop-n-hold one skate at an angle to act as the pivot foot and
the other traces a circle around it (and you). It may help to
think of having each skate trace concentric circles, with the
pivot skate tracing the much smaller inner one. The pivot skate
will be turning on its outside edge, while the outer skate will
be on its inside edge.

_SPREAD EAGLE SPINOUTS:_
A spinout with your skates in a bent spread eagle position
(i.e., heels pointed towards each other, skates at slightly
less than 180 degrees). There is no pivot foot here, instead
both your skates trace the arc.

There are inside and outside spread eagles, where you skate on
both inside or both outside edges. The above paragraph
describes the inside spread eagle.

A sustained outside spread eagle is more of an artistic skating
move than a practical stop, although I use it occasionally to
stop on flat surfaces.

NOTE that all types of spinouts require a fair amount of room.
Your forward motion is quite suddenly changed to angular motion
so I'd recommend this mainly for low traffic areas where you
won't have people running into you from behind when you do the
spinout.

_CROSSOVER STOP:_
This stop works both forwards and backwards at higher speeds. I
call this the crossover stop because your feet are held in the
position of a spread-out crossover. In this stop, you're going
to be arcing to one side. The harder and sharper you turn, the
faster you stop. If you tend to trip on your skates, spread
your skates farther apart (forwards-backwards).

The braking pressure comes from the turn. The harder you press
with the outer edge of your back skate, the faster you stop. So
if you're turning left, your right skate is in front, the left
skate is almost right behind it (so that all your wheels are in
line). Press on the outer edge of your left skate (your back
skate) and on the inner edge of your right skate.

There is also the inverted crossover stop where your feet
positions are reversed: so you turn left with your left foot
forward and right foot back (and vice versa for right turns).
Watch ice hockey players just after play has stopped. More
often than not, the circle around in the inverted crossover
position.

Both crossover stops are good for high speed stops but make
sure you have plenty of open space.

_SLALOMING/PARALLEL TURNS:_
For skiers, this maps over very nicely. This is more of a speed
control technique rather than a stop, but it's very useful to
know. Explaining slalom turns can take an entire book in
itself, so I will merely suggest that you find a skier or a ski
book to show you how.

One way to practice this is to find a nice gentle slope with
plenty of space at the bottom, set up cones in a line, and
weave through the cones.


_________________________________________________________________

ADVANCED LEVEL

This next set of stops require good independent leg control. These
advanced stops will require you to be skating only one foot for some
portion of the technique.

_T-STOP:_
This stop uses your wheels as a source of friction. To do the
T-stop, place one skate behind you, nearly perpendicular to
your direction of travel. Bend a little in both knees to drag
your wheels. You should think more of dragging the heel than
the toe. Apply the braking pressure to your heel. If you drag
the toe too much, you will end up spinning around. Keep your
weight mainly on your skating (front) foot. As you learn to
stop at higher speeds you will apply more downward pressure to
the back skate (but your weight is still on the front skate).

If you have a World Wide Web (WWW) browser, Check out Scott's
picture tutorial on T-stops.

NOTE: One particular phenomenon to avoid in the T-stop, or any
wheel-dragging stop (such as the toe drag) is the "flats". If
you T- stop or toe drag such that the wheels do not roll as
your drag, you will end up with a flattened wheel which will
not roll smoothly at all. In effect, ruining your wheel(s).

_TOE DRAG:_
Similar to the T-stop except you drag only the toe wheel
instead of all four or five wheels. Unlike the T-stop it's not
critical to keep the skate perpendicular to your line of
travel. In fact, you're free to drag the wheel anywhere in a
180+ degree arc behind you. Also, your toe can be pointed into
the ground at pretty much any angle. (If you have old wheels,
the toe position is a good place to put them if you want to
avoid shredding your good wheels.)

The toe drag is better than the T-stop in that you wear down
only one wheel, and more importantly, you are also allowed much
better control over steering, since you can still stop
effectively even if the drag wheel rolls too much. The toe drag
can stop you even when at cruising speeds, although at
significantly longer breaking distance than the brake-pad or
the T-stop since you are dragging only one wheel.

_BACKWARDS T-STOP:_
This is a T-stop when you're rolling backwards. There are two
ways to perform this stop. The first way is to stop by dragging
the outside edge of your skate (i.e., toe pointed outward). The
harder way is to point your toe inward, much like a reverse New
York stop (see New York stop).

STEPPING STOPS



These three stepping stops are essentially advanced low-speed stops
("advanced" since they require good independent control over
each skate). They could also be called "pushing" stops, since
most of the braking action is done by pushing a skate against
your motion. Many advanced skaters will do this intuitively,
but I will detail them here for completeness.

_BACKWARD STEPPING STOP:_
This is like when someone pushes you from the front while you
are wearing shoes. One foot automatically steps back to keep
you from falling backwards. On skates then, while rolling
backwards, you simply put one skate behind you, 90 degrees to
the other skate, and hold it there so that your body doesn't
roll any further. This is basically a very low- speed power
stop/power slide, but without the sliding and scraping action
of the wheels (see the Power Stop).

The faster you are moving, the closer you are to doing a true
power stop. This may be a good method to learn the power stop,
gradually building up speed.

_FORWARD STEPPING STOP:_
A low-speed stop very similar to the backwards stepping stop
except you're rolling forwards. This time you plant your skate
90 degrees out in front of, or right next to the rolling skate.
Your front heel will be pointing inwards (it's probably easier
for most people to keep the toe pointed outward here). This is
especially useful at curbs, like just before you accidentally
roll into an intersection, in crowded indoor places, or if you
just want to get a little closer to people you're talking with.


This stop should halt you immediately. Once you plant your
foot, your body should stop moving forward. You may find it
easier if you bend slightly at the waist and knee to give your
skate a better angle to grab.

You can also use this stop in a sort of shuffling fashion:
stop, roll a little, stop, roll a little, etc., until you get
to precisely where you want to be.

_REVERSE STOP (FORWARDS SNOW-PLOW):_
While rolling, point and lift one skate inward, and set it back
down. Roll on it and push off slightly at the heel. Now lift
the other skate, and do the same.

Essentially you are skating backwards even though moving
forwards. Keep doing it and you will eventually start skating
backwards. This can be done even at high speeds.

_BACKWARDS HEEL DRAG:_
This is for rolling backwards. Similar to the toe drag except
you drag your heel wheel. If you find your drag skate rolling
sideways, apply more pressure to your heel wheel.

Now that you can do toe-drags, heel-drags and spinouts...

_TOE-DRAG SPINOUTS:_
This is a one-footed spinout with an accompanying toe-drag on
the other foot. The toe drag will be in the inside of the
spinout. So for a right-foot toe-drag spinout, you will be
carving a right turn. It takes a bit more balance and strength
and will shred your toe wheel a lot. The more pressure on the
toe, and the sharper/harder you carve your turn, the faster you
stop.

At maximum effectiveness, it can stop you very quickly. The
skating foot will be nearly doing a power slide (see Power
Stop) and the dragging foot will be doing a very hard
toe-drag. Done correctly at low to medium speeds, it takes up
at most a sidewalk's width. At downhill speeds, expect to take
up most of a car lane.

NOTE that hitting a crack or rock during this stop really bites
since you've got most of your weight on one skating foot. Look
for any debris or holes ahead of you and be prepared.

_HEEL-DRAG SPINOUTS:_
For this spinout, just plant one of your heel wheels on the
ground out in front of you and spin around it. The only tricky
part is that the pivot heel wheel may roll a little, so keep
some downward pressure on it. It probably helps to keep your
pivot leg straight and slightly locked to help stabilize the
pivot.

A variation on heel-drag spinouts is to use your brake-pad as
the pivot.

This stop looks pretty neat when going backwards, although you
should be careful to protect your knees if you have to abort.
To perform this backwards, start a heel-drag stop (you're
skating backwards), carve the skating foot behind and to the
inside, and you should spin around the heel wheel/brake.

_CURB RAMMING:_
You approach the curb at around 90 degrees (i.e., straight on)
and lift your toes enough to clear the curb. This should jam
your wheels and runners into the curb. You should be prepared
to compensate for the sudden change in your motion.

An alternative curb ramming stop is to do a spinout near the
curb and ram the back of your skate into the curb.

Both these techniques cause quite a bit of shock to your skates
(especially at high speeds) so if you really love your skates
you may not want to do this stop too often 8-)

_POWER STOP/POWER SLIDE:_
This is one of the most effective stops, and also one of the
hardest. To do this stop, you should be able to skate forwards
and backwards well, and also be able to flip front-to-back
quickly.

There appear different approaches to learning the power stop.
The end result should be the same, or nearly so, but both are
detailed below. It is left to the reader to decide which one is
easier to follow.

One way:

You can piece the power stop together by combining two things:

1. flip front to backward.
2. place one foot behind you and push the entire row of wheels
at a very sharp angle into the ground.



You can practice this by skating backwards, gliding, and then
with nearly all your weight on one foot, bring the other foot
behind you, perpendicular to your direction of travel (see the
Backward Stepping stop).

You should start out doing this while traveling slowly. Your
wheels should scrape a little. If they catch, you need to hold
your braking skate at a sharper angle. Once you get this down,
you can practice flipping front-to-back, coast a little, and
then stop. Eventually, the combination becomes one smooth move:
just get the braking leg extended as soon as you flip.

You can use any flip (mohawk, 3-turn, toe-pivot, etc.) for this
stop. This stop is good for hockey, and a good stop when going
backwards (especially at higher speeds). A power-stop using a
jump turn is called a chop stop (see following section).

The other way:

The second method involves one continuous motion instead of
two: Skate forward on an outside edge, while extending the free
leg to the side. All weight is on the skating leg. The free leg
is dragged along the ground. Now sharpen the turn on the
outside edge of the skating leg (with its knee greatly bent),
and swing the free leg in front. This continuous transition
causes the skating leg to turn, so it's now skating in reverse.


The key is to have all the weight on the skating leg. If you
place any weight on the free leg, you will go into a spin and
lose control.

Some prefer this method because you do not need to go into a
complete power slide to stop. At any point in the continuous
motion, you can abort if something is going wrong. Only at
higher speeds is it necessary to completely turn the skating
foot. There is less risk of catching the free leg on an uneven
surface because it is already extended and dragging before you
swing around.

If you have a WWW browser, check out Scott's power-sliding
picture tutorial.

_CHOP-STOP:_
For skating forward or backward at low to moderate speeds. This
is much like the hockey stops done on ice except, since you
can't shave asphalt, you need to jump and turn both skates and
hips perpendicular to the direction of travel. Land with the
skates at an angle (like in the power stop) and push your
wheels against the ground. To maintain balance you can keep one
skate mainly beneath you, while the other goes out forward to
stop you.

Most of the shredding will be done on the lead skate, where the
inside of your lead leg should make a sharp angle against the
ground.

Basically what this is, is a power stop using a jump turn.

The jump isn't so much for air time as for lifting your skates
off the ground so you can reposition them sideways. The lower
the jump you can get away with, the less off balance you should
be when you land. However, if you don't jump high enough you
may not be able to place your lead skate at a sufficient angle.
Caution should be used even more so in this stop than in
others.

The particulars of the jump aren't crucial. You can lead with
one foot followed by the other, and land in that order; or jump
and land with both feet at once. Pick whatever style you're
most comfortable with.

_NEW YORK STOP:_
Harder than even the power stop, the New York stop is mainly a
power stop but you don't turn your gliding foot! It doesn't
appear that just anyone can perform this stop, since it seems
to require quite a bit of knee flexibility. L = the track left
by the left skate, R = ditto by the right skate

------ direction of travel --- >

L---------------------- |
This stop requires your knee to be twisted inward (not a natural
position, by far), so if you can't do it, I wouldn't say it's a big loss
since it seems to have above average potential to cause injury if
done wrong.


_"WILE E. COYOTE" STOP:_

This stop requires brakes on both skates and is very reminiscent of
cartoon charaters, Wile E. Coyote in particular 8-), when they stop
on their heels after going very, very, VERY fast (meep meep! 8-).

_COMBINATION/SEQUENCE STOPS:_

Once you've got some stops perfected, the next thing you might want to
try is a sequence or combination of several stops. These are definitely
more fun and a bit more showy. These are some of the random combination
stops that I do. You can easily make up your own. (Sequences are denoted
with "->" and combos with "+")

S-stop
Crossover stop -> turn opposite direction -> toe-drag
spinout. So for example, you can crossover stop to the
left, ride your left skate and do a toe drag (right toe
pivot) while turning to the right to complete the
S-pattern.

Double crossover stop
crossover stop -> inverted crossover stop (or vice
versa). This also traces out an S-pattern.

Braking T-stop
T-stop with non-brake foot + brake with brake-pad

Braking toe-drag
Brake with brake-pad + toe-drag on other skate. The
braking toe-drag and the braking T-stop are the two of
the most effective ways to stop that I know of when
cruising.

Braking spread-eagle
Spread-eagle (follow w/ spinout optional) with braking
skate in front + braking with brake-pad

Braking glide stop
glide -> reverse feet positions -> brake-pad. The effect
is that of shuffling your feet quickly and stopping.
(Glide: a heel-toe glide, one skate out, and one skate
back; use only the back toe and front heel wheels. The
back skate should be the one with the brake since the
assembly gets in the way on the front skate)


_________________________________________________________________

Related Topics

FALLING:

Falling should be one of your last resort techniques, but everyone
falls some time, so it's a good and safe thing to know. Falling can be
practiced at low speeds to get used the idea that indeed, you can plop
on your guards and pads, and come away safe as houses.
1. One of the less graceful and more painful ways to stop is to
wipeout into a face plant or another nasty, bloody occurrence. I
daresay no one does this "stop" voluntarily. These stops work
vicariously: If you see someone else do it...you're likely to stop
or slow down too 8-)

2. At low speeds, a better (and less painful) falling-stop is to
collapse your body in a way so that the primary scraping areas are
the knee pads and your wrist guards/gloves. Bend your knees, fall
on your knee pads and follow by falling on your wrist guards. Keep
your wrists loose since there is still some risk of injury. See
the collision section below.

If you tend to fall backwards, your rear-end will probably be your
biggest cushion (just how big, depends on you 8-). You should try to
spread out the shock to your arms and over as much body area as
possible (in general)...the less directly on your wrists and elbows,
probably the better. NOTE however, that your tailbone is, after all,
located in your duff and a hard fall at too sharp an angle will either
bruise or fracture/break the tailbone.

At high speeds, when you desperately need to stop, an outright
collapse on your protection gear may not be enough. High speed falls
are best when you take the brunt of the force with the entire body,
save for the head (besides, you're wearing your helmet, right?)

Rolling with the fall is a key to reducing the force of impact. So if
you happen to be careening down a hill, if possible, turn sideways to
your direction of travel and fall uphill (to keep you from tumbling
further down the hill). When you hit, keep your body loose, with hands
up near your face or over your head. With luck, and no other dangers
eminent (such as approaching 18-wheelers or rolling off a cliff), you
should be able to stand up, thank your favorite deity, wipe yourself
off, and go take a lesson in skating safety and control.

COLLISIONS WITH STATIONARY OBJECTS: Hopefully you will never ever have
to use a collision as a means to stop, but if you ever do, keep your
limbs bent and your body relaxed. Act like a big shock-absorber and
cushion your contact with bending of the arms and legs. Locked limbs
will only increase the shock going into your joints causing likely
ligament/tendon tears or other damage.

Bottom line

Practically speaking, all the stops that require dragging the wheels
will put a bigger dent in your wallet since wheels cost a bundle. If
you don't use your brake-pad, harder wheels may slow down the wear on
your wheels.


_________________________________________________________________



Copyright notice
_________________________________________________________________

Skating Backwards

From: ph...@csv.warwick.ac.uk (Bungle)
Date: 9 Sep 1994 00:12:35 +0100

The easiest way to start, is _slowly_. Build up in stages.

Moving in this ----------------> direction

_Stage one:_

A simple roll backwards on flat ground, letting skates go apart, then
back to the middle. Don't try and lift feet of the ground at any time.

___..___ ___..___
Right foot ---'''' ````---..---'''' ````---..

Left foot ---....___ ___....---'`---....___ ___....---'`
`' `'

_Stage two:_

Keep one foot steady (if you are better at right-handed cross-overs,
this should probably be you left foot) and do more exaggerated shorter
movements with the other foot. Push the foot out quite hard (with toe
pointing inwards slightly) while putting most weight on the other
foot. I find it easier to use the front wheels on my pushing foot.
When pulling the foot back in, do not try to lift it, just pull it in
slowly. Don't try to create motion from the inward pull. Motion should
be from the out-push only.

,--... ,--... ,--...
Right foot ,' ```--...,' ```--...,' ```--...

left foot -----------------------------------------------

_Stage three:_

Swap feet over.

_Stage four:_

Push with alternate feet.

,--... ,--...
Right foot ,' ```--...............,' ```--.............

Left foot ''''''````````. ___--'''''''''```````. ___--
`--''' `--'''

_Stage five:_

Move feet at the same time

,--... ,--... ,--...
Right foot ,' ```--...,' ```--...,' ```--...,

Left foot ___--''`. ___--''`. ___--''`. ___
' `--''' `--''' `--'''

_Stage six:_

This is where you start trying hills, corners, crossovers, stairs, or
whatever else takes you fancy.


_________________________________________________________________

From: g...@crunch.commodore.com (George Robbins)
There are several different ideas on the best way to get started with
backwards skating, which means you tend to get a lot of responses, but
no agreement.

1) Start by pushing off a wall or fence, or turning from forward to
backward while rolling. Just coast until you feel secure with the
general idea. A helmet isn't a bad idea, by the way!

2) Get your posture/balance right - your body should be upright, with
your knees bent - if you lean forward while skating, this will seem
like leaning backwards. If you lean forward you'll find yourself
dancing on your toe wheels and then your nose.

3) Get your feet at a normal track width - not neccessarily clicking
heels, but less than shoulder width. Many folk spread out when the
feel insecure, but you can't "stroke" from that position.

4) At this point you can fool around a little - you can turn by
leaning or keep yourself moving with a "sculling" motion - moving both
feet out-in-out-in as if tracing coke-bottle curves.

5) Next, you need to get comfortable with rolling on one foot, so that
you can be pushing with the other. Just pick up one foot - half an
inch is fine - and roll on the other. This will require that you get
the rolling foot centered under your weight! (see 2 above). Practice
some one-foot gliding and turns.

6) Finally, you are ready to stroke - just push one leg out and to the
side while you roll on the other, then at the end of the stroke, pick
up that skate and set it back alongside the other. Alternate feet, and
as you get the hang of it, you'll find that you can maintain and build
speed.

7) Expect it to take a while for you to get comfortable, just try a
little backwards action each time you go out to skate. You also want
to get in the habit of looking over your shoulder to see where you're
going, looking only at where you've been leads to surprises.

8) There an alternate method of learning to stroke, which goes from
sculling with both feet to sculling with one at a time and then
getting a more powerful push with that foot. This may lead more
naturally to the Hockey wide-track "C-cut" backward stride, where you
roll/slide the foot back instead of picking it up, but that's more for
quick maneuvering, not speed/distance skating.




_________________________________________________________________



Skating Downhills



(and surviving!)
by Tony Chen For whatever reason that you're tackling downhill skating
(you want to cross-train for skiing, you like the speed, there's no
other way around, etc.), you should never take it for granted that you
can just "pick it up". Otherwise, the paramedics might be doing the
picking (pieces of you) up.

Note that skating downhill can easily exceed 30-35mph. Skaters have
been clocked at over 75mph, so skating downhill should NOT be treated
lightly.

Ancedote: Back in 1992, while I was still at Princeton, some of my
skating buddies and I rented skates for a whole group of our other
friends who didn't have skates. We went over to a short campus road
that was nice and flat so that everyone could get a hang of skating.
After maybe 15 minutes of zooming back and forth on that stretch of
asphalt, we decided to take the whole group down to the wide-open
backlot behind the gym.

One thing we forgot about: the only way to the gym was downhill on
the main campus road. As the group turned on the main road (some on
the sidewalk grass, others hanging on to the better skaters) one
skater started rolling down, ever so slowly. By the time she was
fully on the hill, she was already going fast enough to be beyond
her control level.

She continued accelerating for 20 or 30 yards, calling out for help.
The road went by a dorm, so there was no grassy areas nearby.
Nothing was nearby for grabbing. I saw what was happening and
sprinted to the main road and then down the hill after her. I had to
got her to grab my arm, and then I stomped on the brake. After a few
seconds of brake screeching, we finally stopped.

Okay, happy ending, no one hurt, and all that. The point is, it
doesn't take much to get out of control when you're going downhill.
My friend was probably only going 10 mph, but when you feel out of
control it SEEMS like 50mph.



Downhill skating should be attempted only after you've learned some of
the basic skating skills: turns, braking, and balance. Braking means
not only the heel brake, but alternative speed control methods like
the T-stop, slaloming, toe-drag, and others. If you don't know how to
control your speed, the ground hitting your face at 30mph will do it
for you, so take your pick 8-)

There are 6 main components for downhill skating:

1. Safety and your gear
2. Safety and the road
3. Safety in your mind
4. Braking ability and power
5. Speed control
6. Relax!

_Safety and your gear_
Although you should be wearing your helmet even for non-hill
skating, it goes double and triple for downhills. Wiping out at
even 15-20mph can cause major road rash and brain damage, so
wear those pads!

_Safety and the road_
All skating equipment in the world may not help if the hill
you're skating on is pothole-ridden, debris-covered, or just
downright bumpy. Make sure you scout a hill on foot so that you
know what to expect. If you're in a car, get out and walk. Your
car will make the road seem deceptively smooth. Your skate
wheels will feel every bump and crack, so take the time to know
what you're getting into.

_Safety and your mind_
Even if you've got great equipment and scouted the hill, it
won't make a difference if you go out and skate like a reckless
maniac. If you know that there is occasional car traffic, you
have to keep your eyes and ears open. If a car is about to pass
you, get narrow, near the curb, and let them know you see them.
Know where there are stop lights, intersections, and pedestrian
crossings so that you'll be prepared.

It helps if you've got other skaters watching out for traffic,
both down and up stream. Not that I'm advocating that you have
hordes of skaters on a hill, but if you're going to be skating
downhill with others, watch out for each other.

_Braking ability and power:_
First, I would suggest a lot of practice learning to stop
quickly using only your brake skate. _But before you try any of
this, you must be comfortable using the heel brake_. If you're
not, practice using the heel brake first, even if it takes a
few days or even a week.

Part I: flats

+ Find a good open area like a parking lot (no traffic, etc.)
+ Start at one side, skate as fast as you can towards the other
side
+ When you're halfway across, try to brake as fast as possible
+ Repeat until you can stop with all your weight on the brake.
You'll have to lift your back skate and press into your
braking heel.
Part II: hills
+ Find a reasonable hill that has little or no traffic
+ Start at the bottom and skate up to the point where you feel
comfortable skating down from
+ Coast down, braking as needed.
+ Repeat until you're comfortable with that heigh. Then do it
again, but from a bit higher up the hill.



The main thing to keep in mind is the leverage, with the pivot
at your braking heel. You want to apply all the pressure into
the brake. Also, make sure to lean back slightly, to counter
your forward motion.

_Speed control:_
You won't always want to stop completely as you coast downhill.
Most of the time you only want to keep your speed at a certain
level. To do this, you want to apply your brakes every 5-10
yards, or even more frequently if you need to. You can also
apply the brake continuously, but at only half-pressure. If
you've practiced your braking in step 1, then this should be no
problem. The principle is that if your speed stays within your
comfort zone, you'll be in better control.

_Relax:_
When you attain braking proficiency and speed control, then
being relaxed while you skate downhill should come fairly easy.
Being relaxed isn't just some Zen thing or a way to look cool.
Keeping relaxed is critical for unanticipated bumps or debris
on the road that could make you trip and wipe out. When you're
relaxed your body reflexes can respond better than when you're
all tense from fear of wiping out.

Hopefully, when all is said and done, you'll be a much more adept
skater when you've mastered downhill skating. Not only will you be a
better skater overall, since many of the skills will transfer to other
skating methods, but you'll be a much more confident skater.

Copyright Š 1991-1996 Anthony D. Chen (adc...@skatefaq.com)

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part3


_r.s.s.inline FAQ: Techniques - Stairs, Grinds and Rails_
_________________________________________________________________

[LINK] -->

TECHNIQUES - STAIRS, GRINDS AND RAILS

Friday, 31-May-96 17:59:34 MDT

Table of Contents

* Stair riding
* Curb grinds and wall stalls
* Rails
* Skitching (skate-hitching)

STAIR RIDING

From: ai...@hplvec.LVLD.HP.COM (Jim Aites)

I'm pretty comfortable riding stairs (frontwards and backwards), but
discovered something which in hindsight should have been obvious, and
might be worth mentioning to those who are looking for stairs to ride.


Simply put, there are stairs worth riding and the are stairs that
you'd be nuts to do anything but jump down/over.

Dangerous stairs: Ride-able stairs: Fun/easy stairs:

|__ |____ |______
| | |
|__ |____ |______
| | |
|__ |____ |______

Too obvious you say? Yeah, me too. I durn near nailed myself going
backwards down a dangerous set the other day. I guess I figured that
stairs were stairs. Wrong thinking is punishable...via PAIN!

From: rbu...@owlnet.rice.edu (Robert John Butera)

Tonight I finally did my first competent stair bashing, doing 6-8
stairs at the Party-on-the-Plaza in downtown Houston. I thought I'd
share some of what I learned with others, since this thread comes up a
lot.

* I was surprised how EASY is was - a lot of it is overcoming the
confidence factor and being relaxed.

* It really helps to watch someone. I decided to try it when I saw
someone that I KNEW was a much less experienced skater than me,
and decided, dammit I'm going to tackle this thing.

* The BIGGEST tip I have for getting started is to constantly remind
yourself to keep one foot in fron tof the other. The ride is a lot
smoother. After about an hour of doing it, I could get myself to
do it with my skates almost side-by-side, but your much more
likely to lose your balance.

* At first I kept on tripping on the bottom stair or two (yet
miraculously I never fell!). The guy who showed me how to do it
noticed that as I progressed down the stairs, my rear foot was
moving forward and becoming more "side-by-side" with my front foot
(see the previous note). The trick was to relax yet concentrate on
foot placement.

* When I got back to campus, I tried skating backward down some
wimpy 2-4 stair spread out stairs. The people here are right: I
think backwards stair crashing might actually be easier. I intend
to go downtown tomorrow night and try the backwards thing on some
larger stairs.

Overall, a great night for skating. I also found the "ideal parking
deck" with those two important prerequisites: no visible security and
a working elevator (its really steep, but has 6-7 levels). Such
parking decks are becoming few and far between around here as more
skaters start "invading" them, making the security dudes a lot more
testy.

From: @sedona.intel.com (Kenneth Creta)

In article , prok...@acf2.nyu.edu (Andrew) writes:
> I've been skating for about 3 month now, but still can't skate down-
> stairs. I tried to go up the stairs and it works well, very fast! I saw peop
le
> going upstairs and did not find it difficult at all. But looking down from th
e
> top of even 7 step stair scares the shit out of me.

Try a smaller set first. A wouldn't advise going straight to 7 stairs.

>I tried going down from the
> fourth step of a 15 step stair, but I ended up running downstairs, not skatin
g.

This will never work. You need some speed to prevent your skates from catching
on them. My friend and I (we do stairs all the time) have recently started
hit the stairs at a snail's pace. Not as easy when going slow.

> Do you have to keep the blades horisontally, when you go down, or at a 45 ang
le?

Although I don;t really think about it, I guess I'd have to say horizontal.


> It seems that if you keep the skates at an anlge, you end up running downstai
rs,but if you keep them horisontally, the brake would definitely get in the way
on
> almost any stairs, except very flat ones. Or you have to approach the stair a
t
> an angle, to make the path longer?

A good way to start. Stairs are much easier at an angle. The easier way is
if your front foot is opposite the angle your going. In other words, if
your back foot is your right (mine is) try angling right to left.

If you go slow, your brake will definitely be a concern. I don't bother with
one anyway. What could make someone want to stop anyway :)

Ken

From: ma...@unidata.ucar.edu (Matt Hicks)

I saw some street freestyle on Prime Sports Network (I think it was) a
few weeks ago and I noticed that the guys doing stairs seemed to be
just dragging the toe wheels of their trailing foot (feet?). All their
weight was on the leading foot and the trailing foot seemed to be just
a rudder or for balance only. Anyone had any experience with this
technique? See the worst ASCII drawing in the world below if this is
not clear.

/ /
/ / \
/ / \
O|---------- /\ \
| | / | |
O| ----------/ | |
______ O| / | |
| |__| |----|
|_O_______ | |
| | \__
|________ | \
| |________|
|___@ @ @ @_
|
|
--


From: kcr...@sedona.intel.com (Kenneth Creta)

Hi,
I've been stair bashing for a LONG time now. However, I've always
wondered about my form and whether I was doing it right because it has always
seemed that my ride was ALOT rougher and bumpier than others I've watched.

Last night proved that something was wrong. My friend and I were
taking our favorite set of stairs REALLY SLOW. This isn't so easy. Howver,
while my friend was able to do it OK, I found that my back (right) foot kept
on catching on the steps. My friend thinks I put too much weight on the back
foot and I think he might be be right because when I listen, he sounds like
CHUNK-KA CHUNK-KA where I sound like CHUNK CHUNK. You know what I mean.

Any of you find yourself in a similar situation?

Ken
--

From: so...@cyclone.mitre.org (Stephen J. Okay)

In article har...@leland.Stanford.EDU (Lawrence Chr-Jr Liu) writes:
>Jeff writes:
>
>Out of curiosity, do most skaters think 180's or 360's off stairs are easier?
>I'm trying to learn 360's, but I can't quite get the hang of it -- any
>suggestions? (These 360's are on flat ground for now, I don't have the full
>no fear mentality -- yet ;) )

I haven't quite gotten there either yet, so I'm going to say 180s :)

My typical approach to 180's:

Approach the stairs at a moderate speed and when I reach the first one, jump
up like I was going to do a curb jump. I usually land on the 3rd or 4th step
and stop there quite solidly and firmly. As soon as I'm sure of my purchase on
that step(about a second or so), I push back with my front wheels and turn
around to land facing forward.

is it much of a transition to make this a 270?

I think the reason I haven't done a 360 yet is that I'm not that comfortable
landing backwards. Although I am getting better with the heel-to-heels, so
I do feel more comfortablke landing and then spinning or doing wide circles.
(Thats the best I can manage with this so far...but they are getting WIDER! :)
)

ObTrick: Found another cool office over the weekend. TThis one not only has
a deep curb ramp, but also a long cement one running up to the front
door. I was catching some major air off this, almost enough to start
doing tricks in midair..
For those in the area,this is the Dept. of the Interior building over in
Sir Isaac Newton Square in Reston...they've got some pretty cool stairs too..

--

From: kcr...@sedona.intel.com (Kenneth Creta)

In article , cd...@cleveland.Freenet.Edu (Douglas J. Narby) writes:

> Stairs (this one not explained too well; and I haven't had the Testes to
> try it without some clues).

Remember to bend you knees and put more weight on the back foot than the
front. I put my left foot 1/2 a foot length ahead of my right (my right
leg is the stronger of the two) and bend my knees to absorb much of the
impact. When people get scared, they straighten up which winds up in a
wreck. Also, while going down, try to be light on your feet. I know that
sounds funny but picture it and "float" over the stairs. Use the force,
Luke :)

If you try backwards, put your stronger leg forward (uphill) and put your
(most of but not all) weight on your toes. Like forward, put most of the
weight on your stronger leg. Too much weight on your heels can result in
catching the foot throwing you on your back.

We have two flights of 6 steps with about 5 feet of flat in between and I
like to hit the first going forward and then switching backwards for the
next flight. Or going down the first set, and jumping into a 180 over
the second and so on.

> My best trick so far is jumping a flight of four stairs. Now I am trying
> to learn to do crossovers whilst skating backward.

I think backwards cross-overs is one of the best techniques that develops
overall skating ability. It really forces you to balance and takes quite
a bit of practice before you are really comfortable. BE SURE TO PRACTICE
BOTH LEFT AND RIGHT EQUALLY. I see alot of people who can go one way but
not the other.

New Tricks:

Work on 360 jumps off the ground (forward and backward). Once you
have those down, hit a jump and do it (again, forwards and backwards).

Try a "Dutchman". Jump off a ramp, grab both feet behind your back
while in the air and land (on your feet :)

--

From: co...@elec.canterbury.ac.nz (DAve.)
Subject: Re: Stair/Wall Jumps..

In article , ho...@netcom.com (Will Leland) writes:
> RE: how to ride down stairs
> SPEED! just get going a good clip, put your weaker foot in front of
> the other for more stability, and ride down with most of your weight
> on the back skate.
> I ran into an upper limit on stairs though. When I got up to 10 steps
> I ran out of speed (and balance) and did a major face plant. Do those
> hockey helmets come with face cages :)

Speed is nice - balance is better! :-)

Once again, though, you need to be able to skate more or less one foot in front

of the other. I like to push my front foot out, almost straight so that if
it gets caught on a step it 'springs' back in front really quickly.

Then place the trailing knee really close and almost behind the leading one.
This forces one to bend that trailing leg, which takes up a lot of the bumpines
s.
The more relaxed the back leg is, the smoother the ride goes.

I have managed 15 consecutive steps this way. The only reason that that is
the limit, is that I have not found more than 15 consecutive steps. :-)
It is real easy to lose your nerve after 12 or so. As soon as you stiffen or
straghten up the back leg, it is all over :-\

Anyways, this is *MY* method (MHOs only) - it is certainly not everyones.
I think one just needs to find what is most comfortable for oneself.

--

From: ki...@iat.com (Kimon Papahadjopulos)

First of all, like most everything else, this skill comes with practice,
and at first that is really hard to do since you don't know how to do
it yet.

The first thing you have to do is find is a good bunch of stairs to practice
on. On the Berkeley Campus there is an ideal sight: one of the buildings
is built on an incline so that the bottom floor is underground at the
top of the hill and completely exposed on the bottom.

Because of this, a stairway that runs the length of the building
"fades away", so that there are no stairs at one end, but it builds
up gradually to about twenty steps at the other end.

Besides being very wide, the the steps are also very long. If you
can find a set up like this, your halfway there already. This way
you can practice with one or two steps, and move up one at a time when
you get more confident.

>When skating down narrow stairs, is it easier to go straight down
>or is it easier to go at an angle? It seems like going at an
>angle might be easier because it would provide more opportunity
>to have both skates in contact simultaneously.

Can you really go down truly narrow stairs at an angle? On a wide
bunch of stairs, going down at an angle is much easier because you don't
go nearly as fast. This is essential when you are learning.

>How should your weight be distributed? Should it be equally
>distributed, shifted mostly to the leading leg, or shifted mostly
>to the trailing leg?

Almost all on the trailing leg. The front leg is mostly a guide.

>Does having a brake on one skate increase the risk of a fall?
>Since the brake extends beyond the rear of one skate, my concern
>is that it might get caught on the edge of a step. Therefore,
>should the skate with the brake lead, follow, or does it matter?

Learn how to t-stop before you learn stairs. The back break is a hazard
for any sort of trick, whether it be crossovers, skating backwards, or
going down stairs.

If you are interested in doing any of the above, it's well worth your
while to learn how to get by without the back brake. It will probably
save you a bunch of nasty falls.

IMO, anyone that is trying to learn stairs with a brake is just asking
for it. Generally, learning a t-stop is your first trick, since it's
easier to learn, and makes most other tricks easier.

It also kind of proves that you know what you are doing, and are ready
for the next level.

And you're right about the brake getting caught on the edge of
each step.

Also, when you are practicing, you often times are not in the best balance
when you finish a set of stairs. If you happen to catch your brake
when this happens, you are probaly going to end up on the pavement.

>Is there a safe, piecemeal way to learn skating down stairs, or
>should I necessarily expect to fall as part of the learning
>process?

Again, if you can find a nice set of stairs, you don't necessarily have
to murder yourself. Practive on two or three stairs and then move up.

But of course, wear full protective gear, and don't complain if your
skates break. Rollerblade Lightnings are very sturdy, and hold up fairly
well. I'm sure TRS's are good too, maybe even Macroblades and Aeroblades.
But don't use Zetra's or any skate with a metal blade. SwitchIts in my
experience are somewhat frigile for this sort of thing.

!*!*!

It should be understood that if you push beyond the level of your
abilities, and you happen to land on your head, even with a helmut,
you could kill yourself.

!*!*!

>Is stair skating always risky, even for those who have mastered
>it, or is it fairly safe once a skater understands how it is
>done?

I have not done a lot because I have concerns about my knees: going
down stairs really puts a lot of stress on your knees, as well as your
skates. From what I have done, I believe that skating stairs
becomes as easy as anything else after a while, as long as you know the
particular staircase that you are going down, and there is no one walking
up it.

From: ahe...@expert.cc.purdue.edu (Sean Ahern)

>IMO, anyone that is trying to learn stairs with a brake is just asking
>for it. Generally, learning a t-stop is your first trick, since it's
>easier to learn, and makes most other tricks easier.

No way....I learned you to skate down stairs by teaching myself to be
aware of the brake and what I was doing with it.

I have also taught other people how to do this as well.

I think leaving the brake on makes you more aware of what your skates are
doing.

>It also kind of proves that you know what you are doing, and are ready
>for the next level.

Exactly my point about leaving the brake on.

Now while I don't use the brake except when I have to do SUDDEN stops like
when a car pulls in front of me, I think it's a good thing to leave on for
safety's sake.

>And you're right about the brake getting caught on the edge of
>each step.

Well, not if you have enough speed. I have found that stairs are actually
harder at slow speeds. Going slowly, the edge of the stair will give a pivot
that can throw off your balance. If you are going moderately fast, you just
skate right down the stairs, almost as if they are one surface.

You MUST make sure that one skate is in front of the other and your knees are
bent deep. You also might crouch down a bit and lean forward. I have found
that this helps me keep my balance. Don't lean forward too far or you will
tumble forward. (not fun on stairs)

>Also, when you are practicing, you often times are not in the best balance
>when you finish a set of stairs. If you happen to catch your brake
>when this happens, you are probaly going to end up on the pavement.

Ahhhh, if you are not leaning backwards when you are going down, you shouldn't
be in a position to catch your brake anywhere.

>Again, if you can find a nice set of stairs, you don't necessarily have
>to murder yourself. Practive on two or three stairs and then move up.

Yes, this is very true. Start out on a wide set of stairs. If you can get
one stair (kinda like a curb), try to keep going and get the next one. If you
get pretty good at this, try doing them a little faster. You will learn the
basic techniques of stairs this way and will soon be able to move onto steeper
and steeper stairs.

>>Is stair skating always risky, even for those who have mastered
>>it, or is it fairly safe once a skater understands how it is
>>done?

>I have not done a lot because I have concerns about my knees: going
>down stairs really puts a lot of stress on your knees, as well as your
>skates. From what I have done, I believe that skating stairs
>becomes as easy as anything else after a while, as long as you know the
>particular staircase that you are going down, and there is no one walking
>up it.

It DOES get easy, after a while, but they are still challenging as every flight
of stairs has a different slope and width to them.

--

From: j...@lvld.hp.com (Jim Aites)

re: stair-riding (from an e-mail discussion...possible FAQ submital)

>For the intermediate skater who hasn't tried stairs yet, what would you
>say are the basic skills?

Practicing curbs is a good idea, specially if you 'drop off' instead of
'hop off'. The difference being one of jumping vs riding. A short set of
two or three easy stairs (with wide risers) would be the next step.

>...t-stops with either foot. Probably backwards skating, too?

180's and 380's are probably part of that as well. Not that these are
*needed* for stair bashing, but if someone is doing this level of stuff
then they could certainly handle stairs.

>Is there anything else that people should master before they begin?

No...not 'master', but there are a few things a person needs to know in
order to be relatively successful at handling stairs:

1) a 'reasonable' speed is required!

Contrary to common knowledge about the laws of physics, folks generally
lose speed when going down stairs. Backwards bashing however, will
actually cause one to GAIN speed. No, it's not 'magic'...

Many of us have started down a flight of stairs at a good speed, only to
slow to a crawl, and end up 'bailing out' before reaching the bottom. This
'leap of faith' (hoping you can reach a flat spot when you throw yourself
over the last few steps) is probably the most dangerous thing about riding
stairs. So, if going forward - hit them at speed!

The loss of speed is mostly due to that fact that folks tend to ride the
stairs 'flat', instead of leaning into it and angling the skates as though
on a hill. Riding 'flat' means that the slope isn't really affecting your
speed. While bashing backwards, however, EVERYONE lets their heels lead
the way and the foot naturally angles (er...toes up), thus restoring the
'slope' and gaining speed.

While flat-riding, it doesn't matter what style you use...but keeping
your weight on the trailing skate is relatively standard. Aggressive
bashers often use a wider front-to-back skate placement, but more
importantly, they LEAN into the slope to avoid losing speed.

Note: go easy on this folks...nobody wants to see you do a header down the
stairs.

2) they call it 'bashing' for a reason. Accept it!

Yup, bashing, bone jarring, bouncing, slamming, and in general, beating
yourself up (ok, your skates) while riding stairs is an expected part of
the game. A willingness to accept that it feels uglier than it looks is
needed. Hummm...some folks may argue that it 'looks as bad as it feels'
as well! Either way, you've got to go with it.

3) backwards *IS* easier. But more intimidating.

Honest! Because there is an extra 'shock absorber' (ie your ankle can flex
to your toes whereas your heel is pretty solid) and because your feet will
naturally angle down, the backwards ride is a heck of a lot smoother than
riding stairs frontwards. If you have trouble just 'going-for-it', then
start slow, and use a hand-rail. (normally this is NOT a good thing to do)
Keep a reasonable front-to-back stance and let everything flex!

Note: If you find that going backwards is NOT easier/smoother, then please
let me know. Not that anyone can help you at this point, but rather
because I'd be curious to hear about the 'exception to the rule'.

4) failure to wear a helmet ANYTIME you are rolling backwards or doing
stairs is (of course) enough to get you 'certified' (as insane) in most
states.

I was the first in our group to do 'killer' steps (4 flights of seven
stairs each) backwards. I started from a standing-start at the top while
clutching a hand-rail. The clutch turned into a light balancing guide
after the first three steps...and then I was free-wheeling down the rest.


From: shoo...@onramp.net (Shooshie)
Subject: Re: Stairs...
Date: Mon, 10 Apr 1995 19:43:55 -0600

In article , sj...@Lehigh.EDU wrote:
|> What type of stairs would be the best to start on? Do I want long, flat
|> stairs, or short, steep ones? SHould I take them forwards, backwards, fast,
|> slow, should I lean forward or backwards? All info will be appreciated.

When I began attempting stairs backward, I found some shallow stairs
(long, flat ones) about six steps deep, with a handrail. I found that
using the handrail for security saved my rear end repeatedly. Had I used
the same combination when learning them forward, I might still have
complete use of my shoulder. So... find long, flat stairs and a handrail.
Or you can learn them as I did and fall a few times. Some of those falls
will send you tumbling down stairs and you'll learn what it is that stunt
men get paid for in movies, as well as why they retire young.

It doesn't hurt to go REALLL slow at first with a handrail, just to get
used to the idea, and to see that it really doesn't amount to much more
than straight level skating. But from then on, try it at a nice cruising
speed. Taking them too slow will just make you end up hanging a wheel on
the last step or two, and you'll fall... and grab the rail, of course.
Take it at a speed with which you could almost jump the stairs, and you'll
probably do fine. If I lean at all, it's forward, but I'm not aware of
leaning, so it would be ever-so-slight. Whatever you do, don't lean
backward... unless, of course, you want to practice dribbling your head on
concrete. Which brings up the standard thing that you should know by
now... Wear Your Helmet!

And one more thing: stagger your feet. Your heel of the leading foot
should be at least even with your toe of the trailing foot. That's not a
rule or anything, but it gives you much more security at first. Which
means you need to be sure you are a competent skater with your feet in
that position before you go bustin' down stairs with it. And because your
forward foot will be lower than your trailing foot, you need to bend your
knees and relax your stance as much as possible to let your hips and
ankles do the necessary cantilevering. There's nothing you really "do" to
go down stairs but relax and wait for the last one to come up, hoping that
you aren't in an awkward balance position in the meantime. That word,
"relax" is a killer though. It'll take about a hundred times before you
can relax. Then you've only learned ONE staircase. You have to find a
different kind then, and another, and another. Finally, you are confident
that you can do any staircase. I haven't tried fire escapes, escalators,
or anything like that, though. To be honest, I really like to stick to the
shallow ones. I'm not a slinky, you know.

There's probably more to tell, but I can't think of it. Someone else will,
though.

Shooshie

From: tb...@wam.umd.edu (Nelson)
Subject: Re: Stairs...
Date: 11 Apr 1995 10:29:23 GMT

sj...@Lehigh.EDU wrote:
: What type of stairs would be the best to start on? Do I want long, flat
: stairs, or short, steep ones? SHould I take them forwards, backwards, fast,
: slow, should I lean forward or backwards? All info will be appreciated.

Some of the basics...

* Don't attempt to go backwards if you can't skate backwards well....you'll
end up falling backwards and bash your skull.
* Go forward first...it's rougher, but easier to learn, and more natural.
* Forward stair riding.
- keep feet staggered.
- BEND KNEES!...Like you're about to tackle somebody.
get into that atheletic, and balanced position, and KEEP IT.
- More weight on back leg
- Front leg sort of like a out-rigger. Do Not put too much weight on
front leg. A fall on your butt, and elbows (WEAR PADS!) is better than
a face-plant-tumble down the stairs....I went to the hospital that
way for dislocated shoulder.
- Keep hands in _ready position_ ... ready for a fall. :-)
- Concentrate on keeping your back leg in position. Many beginner stair
riders concentrate so much on the steps they let their back leg get
limp. Then the back leg lags behind more and more, and you end up in a
bad position! If stairs are short, then you just end up catching your
back skate every time. If they are long, then be ready for face-plant.
- So, in my opinion, the biggest thing to remember when learning is to
CONCENTRATE ON KEEPING YOUR LEG POSTIONS (back leg!)

Wear pads, wear a helmet.

Curb Grinds And Wall Stalls

From: stcl...@aol.com (StClair4)
Date: 5 Jul 1995 13:10:33 -0400

Here is a basic guide to grinds.

1. Frontside and backside grinds:Many people think that these grinds
are easiest. I think that this is true on rails, but not on curbs.
Find a low rail (4-8") that is small enough to fit between your 2nd
and 3rd wheels. To start out, go directly AT the rail. Jump slightly,
and land with your FEET SPREAD with the rail between your 2nd and 3rd
wheels. Once you can do this consistantly, start approaching the rail
from less and less of an angle. The secret to frontsides on rails is
to keep your feet spread or you will end up on your ass.

2. Soul Grinds: Aaaah Soul Grinds. Soul grinds are definately the most
fun for me. You can soul grind just about anything (curb, planter,
rail). To learn how to soul, stand next to a curb 4 to 8 inches high.
Jump up onto the curb with the edge of the curb in between your 2nd
and 3rd wheel on your front foot and on the outside sole of your back
boot. If you can do this no problem, you are ready to grind. Find a
curb which is not on a set of stairs, and has enough space for you to
get some speed going parallel to it. (Got it?) Wax about ten feet of
that curb. If you can't find parrafin you can use bar soap. Wax all
around the edge of the curb and about three inches wide on the top.
Approach the curb riding almost parallel to it. Jump onto the curb in
the soul position with your weight evenly distributed on both feet. If
you are having trouble staying on the curb, then try looking down the
curb, This helps keep your front foot on the curb. (You will usually
come off the curb backwards when doing this)

3.Mizou grinds: A mizou grind is like a soul, except the foot that is
grinding on the sole of the boot is the front foot, and the back foot
is grinding in between the second and third wheel. Learn how to soul
before you learn how to Mizou. Do the same learning process that you
did for the soul (stand next the the curb and jump on it). Approach it
much like a soul. If your front foot is coming off the curb, then bend
your knee over the curb more. (crappy art)


knee[ ]
\ \
\ \
______________[ ]

From: so...@cyclone.mitre.org (Stephen J. Okay)


>har...@leland.Stanford.EDU (Lawrence Chr-Jr Liu) writes:
>>In an effort to revive the trick thread, I was wondering if anyone out there
>>in netland has performed a "front-side curb grind", as described in the lates
t
>>issue of InLine. They mentioned rubbing surfboard wax on the steps to get a
>>better grind, but I was also wondering if the trick can be performed without
>>waxing.

Saw it, haven't tried it...

On the subject of 180's though, I've been trying something new during lunch
at work the past couple days. Skate down/across a parking lot, 'till you get
to a median/island. Curb-jump, followed by a 180, landing backwards, then
do whatever...(I've also been working on heel-to-heels, so I've been going
into one of these after I land, partially to practice them, but also because
they can start from a backwards skate, so it looks pretty cool)

I've avoided curb grinds 'cause I'm not sure how well my rails would hold
up to something abrasive like your average concrete curb. I'd probably
try it on something like one thats been painted "No Parking" and more
or less sealed though. Wax? ---maybe, but modding the turf seems a little
bogus to me...

--

From: dma...@is.morgan.com (David Madeo)

In article har...@leland.Stanford.EDU (Lawrence Chr-Jr Liu) writes:

>In an effort to revive the trick thread, I was wondering if anyone out there
>in netland has performed a "front-side curb grind", as described in the late
st
>issue of InLine. They mentioned rubbing surfboard wax on the steps to get a
>better grind, but I was also wondering if the trick can be performed without
>waxing.

You'll definately want to put some wax on. Find out where the
skateboarders in your area wax the curbs and you'll be able to feel
the difference. Rub the wax all around the edge of the curb. I
suggest being precise where you start and stop the waxing. When first
learning you can do a left foot plant on non waxed curb and then bring
the right foot on to the wax, start sliding and bring the left foot
on. It's really important that you get used to skating up to a curb
and jumping onto and off of it at different speeds and angles. It
takes a while to get used to landing and balancing with a curb between
the 2nd and 3rd wheels.

A trick that people are just starting to do around here is to do a
plate/frame scrape and click into a curb grind.

Another much harder is to do a 180/360 to land on the curb for a curb
slide. Start by just trying to land, then move on to the slide.

Supposedly the "latest" is to do sole grinds, but I don't see any
great reason to try them. Stand next to a curb, put the outside edge
of your frame and the bottom of the boot (the sole) against the corner
of the curb. Put your whole weight on this, take the other foot and
out it in front in the traditional grind angle. Do this at high
speed.

I just learned how to do stairs at the courthouse. If you saw that
ABC show two weeks ago, it's the same stairs Aton tumbled on.

--

From: j...@kepler.unh.edu (Spectre)

The reason they suggest waxing, is because they don't suggest
taking off the 3rd wheel back. If you take off the 3rd wheel, you will
slide a lot better. I suggest that you make some type of a shield or plate
to protect your frame. If you look in the same issue of In-line, thereis
an article about people in New York. Look at the picture of the FR group's
skates...one has a shield to protect his frame, one doesn't. If you look
between the wheels on the skate that doesn't, you will see what will
happen if you do too many curb grinds without the shield (his frames are
chipped away between the 2ond and 3rd wheel, and the 3rd and 4th). When
you take off the wheel, you won't really need the wax...but it's easier
to learn with the wheel in, since your skates will 'lock' onto the stair
between the wheels, instead of having a free sliding space, and you'll
slide better with the wax. once you get good at angling your feet, you
will be able to slide on your frames without having to take off the wheel.


>Another question -- has anyone tried those smaller wheels for tricks, like
>"Little Roxs" (I think that's what they're called). Are they necessary for
>rail slides, or can one just remove the third wheel and either slide on one's
>frame or add a teflon plate?

I havn't tried the little wheels yet (actually I don't see myself
trying them at all, I don't really want the loss of speed, or the added
wear on my bearings...) Right now I have a sheet metal plate on my skate
where the 3rd wheel was, and I'm looking around for a hunk of plastic
(any suggestions in the eastern MA, southern NH area?) to make a more
sturdy and less makeshift slider.

>The one trick I'm thinking of learning next is the 180 into stairs and riding
>the rest of the stairs the rest of the way -- how important is it to land one'
s
>wheels on the stairs? Do I have to land both skates at the same time squarely
>on the steps, or is it just jump and land and ride?

It all depends how you bash. Do you have to keep your weight
distributed evenly, or can you pick up a skate when you are going down.
If you bash with even weight, then you will want to land pretty much im
the same position that you would be if you bashed to that point...if you
can pick up a foot, then you just need to land on the dominant foot, then
you can adjust yourself to a more comfortable position as you bash down.
One suggestion...work on just jumping into the stairt and going from there
before you start trying 180's into them....it will hurt alot less if you
screw up going forwards then going backwards (spines smacking cement stairs
isn't really my idea of a good time :)


--

From: holr...@student.tc.umn.edu (James A Holroyd-1)

Jeff, I noticed this, too. The frames look *really* hacked on.
Your shield sounds like a good idea, but it doesn't sound like metal would
either last too long or slide too well to be of any use... I recommend
that you use some skateboard rails (Powell-Peralta Gorilla Ribs were my
favorite, but I don't know if they still make them)... they last forever
and slide forever. Just cut one down so it fits between your wheels,
epoxy it to your shield, and slide on.
I've also been thinking about making a rail that fits between the
2nd and 3rd wheels on my skates... just a small piece of plastic that
would either clip or screw into the cross brace in my lightning should
work. Anbody seen anything like this? It would reduce the ground
clearance of the skate, but this shouldn't be a problem. I think it would
make it way easier (and less harsh on the frames) to rail-slide.

Steve: Yep, they're fun, aren't they? Haven't done them (180 jumps over
curbs) to a
heel-to-heel, but I have kept rotating and sort of spun around in a crouch
to a forward position again once I land... it's not that hard, and it
feels like a 360, 'cept you're only in the air for half of it. I still
haven't got the courage to try 360's over a curb yet.

--

From: kcr...@sedona.intel.com (Kenneth Creta)

In article , cd...@cleveland.Freenet.Edu (Douglas J. Narby) writes:
>
> Sounds cool, Ken, but now we have three jargon terms:
>
> Stall, Curb Grind and Rail Slide.
>
> Anybody care to DEFINE them? Throw in any more us newbies are unlikely

Imagine standing in front of a wall about 3 ft high or so (on your feet).
Now imagine jumping up onto it with both feet, "stalling" there for a second,
and jumping back down. That idea except on blades is a stall. That is also
a VERY basic stall. Now try jumping off the wall to one or more other nearby
walls and doing a 360 in the air before landing. That's a cool stall. Keep
in mind that in order to land stable on the wall, you really have to land on
the corner such that the front two wheels are above the wall and the rear two
wheels are below: o
___o foot
|o
wall | o

I think a curb grind might be the same thing but on a curb instead.

A rail slide is just what it sounds like. Approach a low rail pretty much
parallel. Then jump up onto it as if you're stalling it but instead of jumping
onto it and stopping, you slide down it as far as you can. I can't seem to
find a railing that would lend itself to this (i.e., low enough).


From: so...@cyclone.mitre.org (Stephen J. Okay)

Well, after exchanging messages with some of our resident bladerats
here on the group, I went out and thought I'd try a few of the tricks
that have been described here with varying degrees of success...
The university here I usually blade around has some interesting structures,
so I used those for this.

Rail Slide: Didn't work so hot, but I think thats 'cause I'm too
worried about losing my balance, my hands won't let go of the rail,
or let me rest on my wristguards to let me slide down. A good
way to practice this is to find a "double" railing to do on.
Should look like this:

\
\ \ \ \ easier)
on this one| \ \
|\_/


__________________________________________________________________________

Rail Slides

From: j...@kepler.unh.edu (Spectre)

I don't know if we've gotten much into rail-slides, so I thought
I would be the one to bring it up.

For those who don't know rail-slides, they are sliding sideways along
a railing. They aren't the easiest things, unless you take off one of your
wheels. If you take the 3rd back (of the 4) out, and at least put the axle
back in for support on your frame. A lot of people have teflon or other
plates designed to go in place of the wheel so you slide on the plate rather
than the frame.

I was working on stair bashing this weekend and got a bit bored, so
I started doing rail-slides on the railings instead.

Jump up on the railing (You can stay the direction you are going,
but I like to do a 180 on the way up so I'm facing the way I'm gonna fall :)
With the wheel removed, you want to land on the gap, where the wheel was, then
you simply (Not quite :) just let your feet slide along the railing down the
stairs.

Best way to practice, find something like a railing that is about
3-12 inches off the ground, skate up, land on it, and slide as much as you
can. I don't recommend that you try it right off the bat going down a
stairway, since the sensation of sliding backwards is REALLY strange. The
skate park that I practice at has 2 railings that are about 6 inches off
the ground. One is a railing that was taking off of a wall, and the other is
just a 3 inch diameter pipe that is placed on some wood so that the pipe
sits in the wood structure with 1/2 above the wood.

__________________________________________________________________________


Rail Slides

From: j...@kepler.unh.edu (Spectre)

I don't know if we've gotten much into rail-slides, so I thought
I would be the one to bring it up.

For those who don't know rail-slides, they are sliding sideways along
a railing. They aren't the easiest things, unless you take off one of your
wheels. If you take the 3rd back (of the 4) out, and at least put the axle
back in for support on your frame. A lot of people have teflon or other
plates designed to go in place of the wheel so you slide on the plate rather
than the frame.

I was working on stair bashing this weekend and got a bit bored, so
I started doing rail-slides on the railings instead.

Jump up on the railing (You can stay the direction you are going,
but I like to do a 180 on the way up so I'm facing the way I'm gonna fall :)
With the wheel removed, you want to land on the gap, where the wheel was, then
you simply (Not quite :) just let your feet slide along the railing down the
stairs.

Best way to practice, find something like a railing that is about
3-12 inches off the ground, skate up, land on it, and slide as much as you
can. I don't recommend that you try it right off the bat going down a
stairway, since the sensation of sliding backwards is REALLY strange. The
skate park that I practice at has 2 railings that are about 6 inches off
the ground. One is a railing that was taking off of a wall, and the other is
just a 3 inch diameter pipe that is placed on some wood so that the pipe
sits in the wood structure with 1/2 above the wood.


__________________________________________________________________________


Skitching

From: dy...@mobius.mfg.sgi.com (Dyer Crouch)

Sender: ne...@odin.corp.sgi.com (Net News)

Date: Fri, 10 Feb 1995 00:28:53 GMT


First, don't grab a vehicle which is going a much different speed than you
are. Smaller cars and trucks can feel the slight momentum change and often
figure out what is going on and will hit the brakes or find the nearest
phone & call the cops on you. Both have happened to me. :(

Second, do it on streets which you are real familiar with and know have a
good surface. When you change grades of road or hit potholes at high speed
it sucks.

Third, look where the exhaust pipe is. Hooking city busses is my favorite,
but they make this HUGE plume of SMELLY dust when they first come out of a
stop. Stop signs/lights are also great places to wait for a vehicle to come
up to and stop, saddle up behind the puppy & hook on.

Fourth, the bigger the better. Larger vehicles change speed much less and
do it slower than cars, vans etc... Big trucks that ride real high are good
too since you can see under the truck.

Fifth, careful of the turns. You can get slingshoted if you are on the
outside edge of a vehicle on a turn. LOTS of fun when you do it in control,
but when you aren't, it is a major butt puckering ride.

Sixth, HAVE A SAFE EXIT AVENUE! If you are hanging on at high speeds, you
need to make sure you have someplace to go when you let go. If you are
being pulled into tight areas, get off and change directions and or brake.
It sucks getting checked into stationary objects.

And last but not least, how to hold on. Use both hands. One hand you will
hook under the bumper or around what ever you are grabbing on to, and the
other hand you want to use to brace yourself with in case the vehicle slows
or stops. I usually have my palm straight out against the vehicle's bumper
for this. Your best position to do this is in a crouch with your arms out
in front of you until you get good and can do things in whatever position
and grab you want.

Ooops... one more.
Don't do anything to anyone's vehicle while hooking on which you would not
want done to yours, and mind the pedestrians. They see you as a maniacle
eight wheeled missle, which you are. :)

From: post...@cs.uidaho.edu (DuckMan)
Subject: Re: [INL] Skitching?
Date: 10 Feb 1995 23:16:37 GMT


I've found that the best way to 'Skitch' is just to 'lay on hands'. The
best way to do this is to skate to the vehicel approaching it from behind
(note: you have to be going as fast or faster then the vehicle for this to
work) then just place one hand on the vehicle (ie. the trunk or bumper).
Do not grab the vehicle, the friction from your hand should be enogh to
keep you with the vehicle, but if the vehicle make any rash moves it will
shake you without ripping your arm off.

This only works on flats or downhills. To go uphill you have to hang on.

btw: Stitchin is still dangerous anyway you do it, if you don't have
a death wish don't try it. :)


__________________________________________________________________________


__________________________________________________________________________


*This image is Copyrighted Š 1994-1996 by Anthony D. Chen. Permission
is granted to use this logo in World Wide Web HTML files so long as
this copyright notice is included as either an HTML comment alongside
the invokation (IMG SRC or HREF or otherwise) of the logo, or in the
visible text.


The image may not be sold for profit, nor incorporated in commercial
documents or merchandise without prior written permission of the
copyright holder.


__________________________________________________________________________


Index

FAQs

Glossary

Wheels/Bearings

Clubs/Orgs

Rollerhockey

Quotable rssi Posts


Stopping

Grinding

Vert/Jumps

Slaloms

Figure Skating

Racing


Buying Guide

Used Skates Guide

Companies/Shops

Skate Reviews

Other Reviews


Western

California

Central

Northeast

Southeast

Abroad


__________________________________________________________________________


__________________________________________________________________________


Copyright Š 1991-1996 Anthony D. Chen
(adc...@skatefaq.com)

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part4


_r.s.s.inline FAQ: Techniques - Vert and Jumps_
_________________________________________________________________

[LINK] -->

TECHNIQUES - VERT AND JUMPS

Friday, 31-May-96 17:59:40 MDT

Vert and Jumps

Table of Contents
* Jumps
* Pipes and ramps (links to ramp plans)
* Vert skater terms




_________________________________________________________________

Jumps

From: dc...@mailer.cc.fsu.edu (Daryl S. Cain)

dbr...@Mr-Hyde.aoc.nrao.edu (Daniel Briggs) writes:

Suggestions for exercises on how to work towards a good 360? How
high should I be able to jump in order to have a reasonable shot at
finishing the 360 before landing. For that matter, how should my
feet be set on take off and landing?



The trick is to power your rotation from your torso and just carry
your legs along for the ride. It helps me to hold my arms out in an L
shape (one arm out to the front and one out to the side) and swing
them to get the rotation going. The best way to practice is in your
shoes on the grass (softer when you fall). It's my theory that if you
can't jump and do a 360 in your sneaks (wear heavy shoes to simulate
the weight of skates) then there's no way in hell that your going to
do one in skates. Its also my theory that the best positionl for your
feet is about six feet straight down from your head, I mean, the
hardest part about spinning (on land or in the air) is staying
vertical and balanced.



From: so...@cyclone.mitre.org (Stephen J. Okay)

holr...@student.tc.umn.edu (James A Holroyd-1) writes:

Steve: Yep, they're fun, aren't they? Haven't done them (180 jumps
over curbs) to a heel-to-heel, but I have kept rotating and sort of
spun around in a crouch to a forward position again once I land...



Well, its not really OVER the curb so much as it is using it as a
launchpad of sorts. But yes they are fun.... :)

Crummy ASCII art follows:

____ +--------Launch into 180 here...
/ \ | _
/ \ | / \
/ ___\|/__ \ curb hop
/ / \ \/---------- skating path
Land 180 here ^^^^^^^^^
curb/traffic island



From: j...@kepler.unh.edu (Spectre)

dbr...@Mr-Hyde.aoc.nrao.edu (Daniel Briggs) writes:

Suggestions for exercises on how to work towards a good 360? How
high should I be able to jump in order to have a reasonable shot at
finishing the 360 before landing. For that matter, how should my
feet be set on take off and landing?



Go back to basics. Take off your skates, stand in one place, jump up
and spin around. Concentrate on thinking on what you are doing, one
step at a time. Once you get to a point where you think you can
explain it to a crippled 12 year old, then put your skates on. Start
without moving. Just do the same thing, jump up, turn around (Pick a
bail of cotton if you really want to), and get the feel of what parts
of your body emphasize the speed and control of the spin. Then just
start rolling, and doing it. Once you get to the point where you can
do it with a good speed roll, then everything beyond (curbs, stairs,
etc) is just conquering fear...it's not any different wether you spin
over a perfectly smooth pavement, grass, stairs or a car. If you can
make the jump without any of the obsticals, you can do it with the
obsticals...just close your eyes at first and you won't kno the
difference :)



From: holr...@student.tc.umn.edu (James A Holroyd-1)

Regarding 360's:
I've almost got them now... I'm spinning most of the way round, but I
keep dropping one foot too soon, so I end up landing like this:
(apologies for the ascii art)

| ^
| <---right skate |
| | direction of travel
| |
------- <---left skate


(spinning clockwise)

This isn't really a problem, but it looks kind of stupid... I think I
need to get more of a "pop." I also need to keep my skates closer
together.

The physics behind the spin is actually pretty simple:
While you're still on the ground (the wind-up phase), you give
yourself angular momentum by turning your torso in the opposite
direction to the one you're going to be spinning in, then twisting
into the spin and jumping. Hopefully, you'll give yourself enough
momentum to make yourself go some multiple of 180 degrees when you're
in the air. You can make yourself spin faster by pulling everything in
closer to your axis of rotation. I saw a TV program on PBS once about
video/computer analysis of ice skaters doing jumps... they had one
skater who couldn't do a triple-something-or-other, and they diagnosed
her problem as leaving her arms too far away from her body. They had
her lift weights, which strengthened her arms, which let her pull them
closer in to her body, which helped her finish the jump. One
interesting thing to note about ice skaters is that they usually start
jumps with one leg at least partially extended away from their body.
When they pull the leg in, it reduces their polar moment of inertia,
which increases the rate of the spin (since angular momentum is
conserved, neglecting air resistance). Because most in-liners start
their jumps on 2 skates, we can't get the slingshot effect of bringing
the leg in, consequently we can't do triples on flat ground. Anybody
out there doing ice-style jumps on inlines? Any thoughts from you
ice-skaters out there?

From: mdic...@bbn.com (Michael L. Dickens)

cer...@ait.com (Joseph P. Cernada) wrote:

I still haven't figured out how to get any height while jumping in
this position. I get maybe 5 inches off the ground. Anybody have any
suggestions on how to jump higher from the heel-to-heel position?



It's leg strength. And the ability to raise your legs up like an
airplane's wheels retracting.

If you're in New York, check out the now-somewhat-talked-about Victor
- the master of side-surfing. Before he moved (from Boston), I've
_seen_ him jump a barrel (about 3' height & 1' radius) on it's side
while side-surfing, and have heard that he can do the same barrel
standing up!

What he does highly resembles retracting his legs as he goes up, and
dropping them back as he comes down. Quite impressive.


_________________________________________________________________

Pipes and Ramps

Ramp plans:
* Heckler Magazine plans: http://www.heckler.com/ramps.html
* IASC endorsed blueprints:
Ramp building FAQ: http://web.cps.msu.edu/~dunhamda/dw/ramp_faq.html



From: Spectre (j...@kepler.unh.edu)

Re: pipes

> I'd appreciate it if you could drop me a few pointers so that if I find one
> someday I won't kill myself on the first time out...



Pointers:

START FROM THE BOTTOM!!! Never start from the top until you get get
yourself to the top from skating, and not climbing. Even if it is a 3
foot quarter pipe...don't start from the top till you can skate up it,
turn around at the top, and come back down without falling. I was
teaching a friend of mine, he was fooling around on a 3 foot
quarter...I told him to work bottom to top. He skated up, up the ramp,
and stood on the top... the "dropped in" (Started from the top
standing up), fell backwards and sprained his wrist, now he doesn't
want to skate pipes anymore.

Work your way up, get used to the transition from flat to sloped..
it's a very strange sensation going up a curved incline vs. a flat
incline. Work on getting used to going up on the transition, turning
around, and coming back down, all fluid.

Once you get comfortable with the transition, you have to learn how to
pump. Pumping is what makes you gain speed when your in the pipe,
since gravity and friction will slow you down a little... I don't know
if I can explain this well but....as you come up to the transition,
bend your knees some...When you start up the transition push your feet
out...the result will just be you standing up...but pushing against
the centrifical (sp?) force will let you get a little more speed. When
you turn around at the "apex" of your ride up...do the same...turn
around, bend your knees a little, and extend against the pipe...you
will notice a BIG change in speed, since you will be getting more
speed than you would if you where just riding down the side of the
pipe. Repeat this for both sides...From the bottom, pump, up the
transition, turn around, pump, down the transition, across the flat,
pump, up the transition, turn around, pump, down the transition. If
there are skateboarders or other skaters there, watch them, expec.
their knees... You can ask them, but a lot of skateboarders don't even
realize they do it.

Pumping is the secret to riding...the better you can pump, the higher
you will go...with out pumping, you will never gain speed, and will
never get as high has you were when you turned around on the other
side.. (Simple physics)

Once you think you have control over that...say you can get to a point
where you can grab onto the top of the pipe and pull yourself up on
the platform, your almost ready to drop in. At this point, you want to
start by going in sitting down. Maybe the first time, sit on the edge
and slide down, just get used to the hight and the speed when you
slide... Then sitting down, put your hands on the coping (the metal
pipe that is on the edge of the pipe) and push yourself forward...you
have to go forward enough so when you stand up, your body will be
perpendicular with the pipe.. push off...and stand up...and go like
you did when you started from the bottom, except you already have some
speed. That part sound dificult, but after a couple of tries it gets
really easy.

Once you feel comfortable with that, you can either 1) drop in
standing up...(put first to wheels over edge..bend your knees and
touch your toes...you'll roll into the pipe, and your legs will be
perp with the pipe.. then you just need to stand up) 2) Start lifting
your feet some as you go in...lift yourself up on your hands, put your
feet behind you so that your feet are higher up with you go in
sitting./..that way you get more used to to the actual hight from the
top...keeping going till your comfortable with getting your feet all
the way to the coping before you push yourself in.

If there are any other skaters there, you can ask them for tips, but
do not "drop in" until you feel comfortable...I did that once...12
foot pipe 1 foot of vertical...dropped in...forgot to bend my
knees...face plant damn close to the flat....

Good luck...be careful....wear a helmet and knee pads at least.... let
me know if anything isn't clear.

From: sav...@csu.murdoch.edu.au (Duncan Savage)

Saw a neat trick that some guys (including one who looked about 13)
are doing in Sydney, Aus. Basically, they use a standard skate ramp,
skate into it, but instead of rolling up it, catch their toes (I don't
remember if it was with one or both feet) on the front of the ramp,
flipping themselves into a forward somersalt with their heads just
about scraping the ramp. They land on the other side of the ramp.
Needless to say they had a full complement of protective gear, and
given the protection even their stuff-ups didn't look too painful. I
don't think I'll try it just yet.

From: holr...@gold.tc.umn.edu (batty)

Charlie, I agree wholeheartedly with your construction technique, but
we found different geometry worked better for us when we built launch
ramps for skateboarding.

When you go off a launch ramp, you are launching so that you land away
from the ramp, so the top lip of the ramp doesn't have to be
perpendicular to the ground. If you build a ramp with a radius less
than 6 feet, it feels _really_ weird. We found that the ramps that
were easiest to launch off were the ones that we could go fastest on,
which gave us more air time. 8 foot radius worked well for us.. You
suggested building a ramp with a 2.5 foot radius. The distance from
your center of gravity (somewhere around your bellybutton) to the
bottom of your skates is about 2.5 feet (less if you're crouching).
When you hit a 2.5 foot radius ramp that goes to vertical, your skates
will go up the ramp, but your center of gravity will stay in one
place... you'll also go straight up in the air and either have to
launch to one side, or you'll have to land back on the ramp.

Here's some really bad ascii art showing my favorite launch ramp:

____
* |
* |
* |
* |
* |
*______________________________



The "launch angle" was a little more than 30 degrees, the whole ramp
was about 8 feet long, and it was about 2-3 feet tall. It was (as I
remember) about a 10 foot radius. it had a small platform at the top
(which, combined with the length of the ramp, made it very stable) We
could hit this ramp going *very* fast, and it sent us a long way. This
is what worked for us.

From: ai...@hplvec.LVLD.HP.COM (Jim Aites)

Hey, you SKATEBOARD'ers! Got any helpful hints for us fledgelings?

| found different geometry worked better for us when we built launch ramps
| 8 foot radius worked well for us.



Is it just me or are a lot of folks under the (obviously) mistaken
impression that some launch ramps use a parabolic curve? Ignoring the
fact that the previous poster indicatated that the ansi-art was poor,
this STILL looks like it isn't a radius type ramp.

____
| * |
| * |
| * |
| * |
| * |
| *______________________________



Also, I've jumped ramps where the vertical part of the ramp was MUCH
closer to 90' than it was to 45'. I'm not saying that they were better
than the above, as a matter of fact, you *have* to go fast so you
don't stall at the top of the ramp...and dribble over the top lip.
<grin> Hang time (altitude) gets outragious pretty quickly, and all
without landing more than 10' from the ramp. Does this match with
anyone else?

From: j...@oin.unh.edu (Spectre)

Fakies are A half-pipe trick. It's actually a un-trick. You go up the
side of the pipe like you are going to do a trick, go in the air, and
do nothing...not even turn around. You then come back into the half
pipe skating backwards (Which isn't nearly as simple as street skating
backwards :)

> Work on 360 jumps off the ground (forward and backward). Once you
>have those down, hit a jump and do it (again, forwards and backwards).



My favorite: 360's clearing 6-8 stairs.

One that I've been playing with, if you find a long bench, or low
wall, or something at least 10-20 feet long. Jump onto it with a 180,
land backwards with one skate on the bench and the other scraping
along the side of the bench, then jump off with another 180. I'm
pretty sure in half-pipe lingo, it's a backwards rail grind, but I'm
not sure.


|____| - one skate
||
other skate -> |____||-------
|| | bench



From: adc...@cs.fsu.edu (Tony Chen)

j...@oin.unh.edu (Spectre) writes:

>
> |____| - one skate
> ||
>other skate -> |____||-------
> || | bench



A more flashy version of bench riding is to jump on top of the bench
(or some kind of edge) and into a spread-eagle (I guess this would be
a 90? 8-) Ride all the way to the end and jump off with a 180 so as to
land in another spread-eagle, but with your feet reversed.

Another variation, find stairs that are sectioned with flats in
between flights. Ride the steps sideways (spread-eagle) and flip 180
in the flats. You could also flip to backwards-bashing or whatever.

From: jnew...@ecst.csuchico.edu (Gadget)

Just to add the simple ones to the list, here goes...
* Front wheels of both skates
* Front wheels of both skates in parallel
* Back wheels of both skates
* Back wheels of both skates in parallel
* One wheel (front/back/left & right)
* Heel & toe
* Front/back/mixed wheels while spread eagle



Of course all these can be done backwards as well.

Oh, and as a great drill. Cross over backwards while going forwards
and cross over forwards when your going backwards....



From: so...@cyclone.mitre.org (Stephen J. Okay)

Subject: Stair/Wall Jumps..

In the ever continuing chronicle of attempts to break my neck, I
thought I'd share some thoughts on my stair and wall work that I did
last night.

I went over to a local high school that has some rather interesting
structures for thrashing on, so following a couple quick laps around
the parking lot, I set to work on the stairs, and while I have no
problem jumping up/over up to 4 steps at a time, or back down, I still
have absolutely _no_ clue as to how to actually ride the damn
things...any hints/ideas would be much appreciated, esp. from our two
resident thrashers on the group...

Aerials are a different story. I can now say with a good degree of
confidence, I can do a 180 (and sometimes a 270) from back off of up
to 4 steps. The trick seems to be in starting your turn when you
launch. I've always fallen when I've tried this until I realized that
its just too much to think about if I try to turn in mid-air, so its
better to just start right off doing it.

_Walls:_
Had moderate success hurdling, getting over a couple walls/barriers.
The idea is to use head straight for the wall and use it as a vault of
sorts to propel yourself into the air with. My biggest problem with
this is that I need to remember to lift my feet higher. I kept
scraping the wall and consequently losing control, making for a really
sloppy landing... I did get over clean once or twice, which probably
looks really cool, but who knows...I was the only one there...

Another cool thing I noticed in my warmup skate: Those sloped ramps
that are often built into curbs as bike or wheel chair ramps make cool
jumps. Dip down the side closest to you and then ride up the lip of
the opposite side and if you're going fast enough, you'll clear the
curb and catch some air(Just make sure no cars are coming,as this does
kind of definitely put you out in the street). So I did that a bunch
of times and liked it a lot...Kind of reminds me of one of my favorite
skiing maneuvers: dipping down into the gouges made by other skiers
and popping out into the air on them.

Oh, I also tried the dual braking thing again, but at higher speeds
than before. Balance is definitely the key to this one. Everything
above your waist should be pointing forward, and everything below
should be leaning back on your heels. Anything else throws your
balance too much, IMHO.

Helmets:I have a Protec skateboarding helmet, that has the 1-impact
foam core with a hard plastic outer shell(none of this wimpy
'microshell' stuff) that fits pretty well. Good side coverage of the
side of my head down past the ears, and covers down the back of my
head. I've gotten some skateboarding/music stickers for it, and it
looks cool. Yes, its the full combat style of helmet, but I definitely
would _not_ thrash without it.

From: IO0...@MAINE.MAINE.EDU

i've never seen "fakies" before. (well, i have a friend who will
occasionally "catch a fakie" but that is something _completely_
different, and not related to skating). the term comes from
skateboarding and means simply "backward". thus the usage would be "i
jumped 180 to fakie...", which tells you that the person started
facing forward. "fakie" preceding a trick name means that the person
was skating backward when the trick was started, i.e., a "fakie 540"
would be one and a half revolutions, starting from backward (and
landing facing forward, hopefully, for a 540 :).

you haven't mentioned anything about airs in your list. that is a
large area, and as far as i know there is no standard for skate airs
(regarding the airs that aren't duplicates of jumps performed in ice
skating, like grabs). well, one thing that could fit on the list of
"not airs" is skating crouched, with most of the weight on one skate,
the other leg being bent so that the knee is close to the ground
(several inches) and only the toe wheel is rolling on the pavement. if
you can't picture it, either see it on MTV sports or watch a man
proposing to a woman, same stance. anyway, it's known locally as a
crunch, as in, "gallivan to crunch".

From: a...@dsbc.icl.co.uk (Andy Wardley)

Last Saturday afternoon was a sheer joy for me. I spent nearly 4 hours
skating the half-pipes in my local park and seeing as it was my first
real (i.e. more than half an hour) session and I managed to get quite
good, I thought I'd share with you my trials and tribulations and tell
you about some of the interesting places I've got bruises.

The smallest of the pipes is about 2 foot high and absolutely bloody
useless because it is so small. The next is about 3 foot high and just
about skatable with inlines. (sorry, did I mention I was skating
inlines?) The 4 foot pipe was great - high enough to get some speed,
wide enough to give some maneuvre^H^H^H^H^H^Hmanoovre^H^H^H^H^H
movabilty room but not so big as to risk neck-breaking for the
uninitiated (me). Bloody good fun!

Whoever said in the FAQ that you shouldn't drop in straight away was
dead right! I skated about half an hour and pretty much got
comfortable with it before dropping in. The first two attempts,
however, resulted in me landing flat on my arse, causing the first
large bruise area and a severe jolt up the spine. Attempt three was
the success and when you've done it once, it's a piece of piss. You've
just got to throw all your weight forwards and get you body
perpendicular to the wall of the pipe. Bloody good fun!

Managing to keep my speed up was the next big task and I slowly got
the hang of it. The trick seems to be to bend your legs up towards you
as you go up into the curve and then extend them out again as you are
coming back down again. It's hard work, particularly on the stomach
muscles, as it requires a lot of trunk flexing. Bloody good fun
though!

Next step was to try a few rail grinds. Easy! Trying to slide along
the rails took a bit more confidence and after limited success, I
decided to leave that for next time. Bloody good fun!

I briefly tried the _big_ pipe. It's about 10 foot high and not to be
skated lightly, IMHO. I didn't drop in because they didn't have the
ladder out to get to the top platform and I didn't really fancy trying
to build my speed up to jump up onto the platform. Again, maybe next
time. The other thing was that there is a sign saying that full safety
kit should be worn on the big pipe. I didn't have a helmet and
thinking about it, I don't reckon it would have been a good idea to
try it without. Bloody good fun though!

On that note actually, I really wouldn't recommend skating pipes
without knee pads and wrist guards *at the very least*. I have bruises
on my knees, elbows, shins, ribs (I landed with my arm under my chest
- Ouch!) and backside and that was with knee pads, elbow pads and
wrist guards. Without those, I would undoubtedly have plaster on at
least one wrist and both knees. I think you can safely manage without
a helmet on all but the biggest pipe but your mileage may vary. It
does take a few bruises to get the hang of pipes, but after the first
couple of hours, the falls are fewer and further between and generally
much more controlled. Bloody good fun too!

If you haven't skated pipes and get the chance - try it! It is really
good fun and doesn't hurt much. I tend to be a bit reckless when
skating - more conservative skaters may well find the experience less
painful.

Anyway, I better go because this post has got very long. Just thought
I'd let you know about my skating experience. If you want to hear
more, I've got Megabytes more I can write about the afternoon :-)

More importantly, if anyone wants to make the trip to South London on
a Saturday or Sunday afternoon (I'm not sure if it's open during the
week) then I can let you know exactly where to find the place.
Similarly, if anyone knows of any other pipes or good skating places
in London, let me know. Apologies to all overseas readers - I realise
it's a bit far to come from the US or Oz or wherever, but if you ever
do find yourself over here....

From: mdic...@bbn.com (Michael L. Dickens)
Subject: Re: Pipe-Dreams

a...@dsbc.icl.co.uk (Andy Wardley) wrote:

> Last Saturday afternoon was a sheer joy for me. I spent nearly 4 hours
> skating the half-pipes in my local park [...]



Hmmmm. So did I - at the indoor skate park in Cambridge - MA that is.
And, yes, it was (& still is) bloody good fun.

Pipes there range from a couple feet with about a 6' radius, to 10'
with an 8' radius - ie: 2', 4', 6', 8', 10'. The half-pipe is 9' with
a 1' extension on one side, with a 8' radius. (I think the 8' radii
are correct; but are close enough for this discussion.)

> Whoever said in the FAQ that you shouldn't drop in straight away was dead
> right! I skated about half an hour and pretty much got comfortable with
> it before dropping in. The first two attempts, however, resulted in me
> landing flat on my arse, causing the first large bruise area and a severe
> jolt up the spine. Attempt three was the success and when you've done it
> once, it's a piece of piss. You've just got to throw all your weight
> forwards and get you body perpendicular to the wall of the pipe.



Agreed with the "don't drop in until you're comfortable" thing. I was
on the coping & doing fakies, forward & reverse 180's, and almost
stalls before I dropped in. I remember the first time I tried on _any_
pipe I fell on my arse as well. But once I got the feel down, I
immediatly went up a couple of levels.

> Managing to keep my speed up was the next big task and I slowly got the
> hang of it. The trick seems to be to bend your legs up towards you as
> you go up into the curve and then extend them out again as you are coming
> back down again. It's hard work, particularly on the stomach muscles, as
> it requires a lot of trunk flexing.



It's called "pump"ing. It's supposed to be bending the legs, not from
the waiste. But most everyone I know splits the task. As you drop in,
you start with legs bent, then "pop" them straight during the
transition. As you approach the pipe to go up, bend slightly, and
"pop" the legs again during the transition. This "pop"ing transfers
potential energy into kinetic energy & vice versa using centripetal
forces, sort of (I won't get into the physics here). So the better you
get at "pop"s, the faster & higher things will go.

> On that note actually, I really wouldn't recommend skating pipes without knee
> pads and wrist guards *at the very least*. I have bruises on my knees,
> elbows, shins, ribs (I landed with my arm under my chest - Ouch!) and
> backside and that was with knee pads, elbow pads and wrist guards. Without
> those, I would undoubtedly have plaster on at least one wrist and both
> knees. I think you can safely manage without a helmet on all but the
> biggest pipe but your mileage may vary. It does take a few bruises to
> get the hang of pipes, but after the first couple of hours, the falls are
> fewer and further between and generally much more controlled.



Definitely a good idea to wear _full_ armor. This might even include
"hip-clips" - pads that clip for hip & thigh protection. Helmets &
_big_ knee pads are a must. Wrist guards are good for sliding & such,
but you should be able to train yourself to fall onto your knees from
ANY position.

Last Saturday I was doing stalls on the 9' pipe - and on one occasion
I pushed off too hard. I knew I was _not_ going to make the whole
transition, so to save myself I pulled my legs up & fell directly onto
my knees. Hit the last foot or so of the transition & slid the rest of
the way down. Because I knew I wasn't going to make it, I
automatically (w/o thinking out it) fell onto my knees. The big cushy
knee pads saved my back again!!!

From: a...@dsbc.icl.co.uk (Andy Wardley)
Subject: "Pipe Dreams 2" presented in glorious Inline-O-Rama

Another weekend of hard-hitting half-pipe skating action was had by
myself, and in a spirit of uncharacteristicly unselfish generosity, I
thought I'd share my tales of woe and joy with all you loverly people
out there. Yes, you too can experience Inline-O-Rama from the safety
and comfort of your own homes....

For those of you who read last weeks issue of "Pipe Dreams", you'll
remember my adventures on the half-pipes at my local park. Since then
I've got quite high up on the gnarly scale and even quite "rad"
according to the local sk8boarders. I'm told this is a compliment :-)

Dropping in, turning, jumping out, these are all second nature now and
bruises are certainly fewer and further between. I also junked my old
Bauer knee pads and got some serious thick pads (not cheap at #25 UK
Quids) after realising quite how much my knees were suffering even
with the pads. The new ones are infinitely better.

I've got the hang of popping/pumping to get some speed up. This means
I can catch some serious air on my way out of the pipe, 180 and drop
back in with little trouble. I reckon a 360 would be fairly easy but I
haven't attempted that yet. My pumping isn't perfect and I found that
I still can't get up and out of the 10' pipe, but practice will no
doubt make perfect. Thanks to Michael for the tips - they helped a
lot. Can anyone actually tell me what the physics are involved in the
process?

Stalling on the rail is a fave of mine and easy for the novice. I
still can't get any decent slides along the coping - maybe I'm just
not going in with enough sideways velocity. Anyone got any
suggestions? I've also tried to stall, jump 180 to a forward stall in
prep to drop in forwards. Didn't work - will keep trying.

The basic fakie (i.e. don't turn and drop backwards) and the stall to
a fakie (i.e. stall on the rail and then drop backwards) are also
quite easy to master and seem to generally impress people who think it
looks inherently dangerous to skate a pipe backwards. Actually, it can
be because you have to be used to taking a transition backwards. You
can then reverse-fakie (is that the right name?) at the other side to
get going forwards again. I bit of a jump when you r-fakie can be
impressive but make sure that your skates land back inside the pipe.
One time, mine didn't, and my left skate caught the top, rolled
backwards onto the platform and I smacked my shin badly on the coping
and slid face-first into the pipe. Well-bruised my shin but it was
BLOODY GOOD FUN!

If anyone has any hints or can tell me about other good trix to try,
I'd love to hear about them. At present, I am the only inliner who
skates the pipes so I don't have anyone else to watch, discuss trix
with or get inspiration from. The sk8boarders are a good laugh and fun
to watch but I worry that I might start to sound like them, man....
:-)

From: j...@kepler.unh.edu (Spectre)

mdic...@bbn.com (Michael L. Dickens) writes:

>a...@dsbc.icl.co.uk (Andy Wardley)
>
>I think I'll go back and review my advanced calculus physics book to see
>what it said in the first place. After all, I never really _read_ the book
>for class - just did problems out of it to pass.



I sat down and calculated what exactly was going on about a year ago
and it is completely out of my brain now (face plants don't help
physics memory very much :). It has to to with the combination of the
centrifital force and the action/reaction principle. by pushing
against the centrifital force you are adding more force, and since the
half pipe can't break (you hope) the force has to be evened another
direction, sideways, which is influenced because of gravity, so the
result is an encrease of speed. Take a look at vectors and force.

I'll try to put in a little more thought on this and get back to
everyone.


_________________________________________________________________

Vert Skating Terms

(contributed by ags...@rev.net)

_Air Kedidi_
Get some air and then peddle your legs like on a bicylce.

_Armour_
Your pads

_Bacon in the pan_
After a hard fall you slide around like bacon in a pan

_Brainless_
a Back Flip with a 540 twist

_Coping_
The metal rod across the top of a ramp to grind or stall on.

_Double Ore-Ida_
an inverted 720

_Droping in_
Standing on a ramp and skating in

_Egg Plant_
A type of invert when you plant the outside hand

_Fakie_
Anything done facing backwards (i.e., a fakie 360 is rolling
backwards jumping doing a 360 landing backwards

_Handplant_
Same as invert

_Inverted_
When you're upside down, legs over your head

_Miller Flip_
A back flip with a 360 thrown in

_McTwist_
An inverted 540

_Sand Plant_
An invert in which both hands are used

_Spine Ramp_
Two Halfpipes placed directly beside each other

_Stall_
When you jump on the top of the ramp or on the coping, then
stop for a few seconds turn and drop back in (Can also be done
on curbs or any other stationary object.)

_Transition_
The part of the pipe in which it goes from horizontal to
vertical or vertical to horizontal


_________________________________________________________________

*This image is Copyrighted © 1994-1996 by Anthony D. Chen. Permission


is granted to use this logo in World Wide Web HTML files so long as
this copyright notice is included as either an HTML comment alongside
the invokation (IMG SRC or HREF or otherwise) of the logo, or in the
visible text.

The image may not be sold for profit, nor incorporated in commercial

documents or merchandise without prior written permission of the
copyright holder.

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part5




_r.s.s.inline FAQ: Techniques - Slalom_
_________________________________________________________________

TECHNIQUES - SLALOM



Last modified: Wednesday, 04-Sep-96 13:02:06 EDT

A Web page devoted to slalom skating was announced in October 1995.
It's called cones+wheels: the inline skating slalom page and can be
found at:
http://www.skatecity.com/C+W/
_________________________________________________________________



From: Jim Aites (j...@hpsmpk.lvld.hp.com)
Date: Unknown

The movement known as a 'slalom' is normally applied to the art of
dodging in and around a series of obstacles. Being pulled by a
ski-boat or weaving thru the poles on a ski slope are two well known
examples. This discussion will try to address some of the joys and
techniques used when effecting this move on in-line skates.

There is both a natural 'swing' and a physical 'compression' that come
into play while doing a slalom. The 'swing' is durn near natural, but
by understanding and making proper use of the 'compression' it is
possible to use this technique to slow your speed, maintain, or even
increase it.

_Note_: Although the slalom can be accomplished in a stylish manner by
almost any skater, the ability to use the technique to slow down
should _not_ be considered a replacement for any of the more standard
braking methods. Also, I believe that serious slaloming is well within
the scope of the intermediate skater. Although novice skaters have
more important things to learn before slaloming...like stopping...I
feel that is is something that any skater can/should do.

Before trying to address the mode used to change your speed, let's
talk about the simplicity of the move while coasting or going down a
very slight grade.

_Basics:_
The slalom movement is based on the transfer of weight during a
continuous series of serpentine turns. This linking of alternating
turns can be a slow-and-easy movement, or it can be as fast as skiing
a tight mogul field.

Although there is a 'classic' position for doing a slalom (crouched
with knees and feet together), it may be done with feet in an open
placement or even in the water-skiing (one foot in front) position.
The most important thing to keep in mind is your ability to handle
your steering and speed.

Generally speaking, a couple of standard down-hill skiing suggestions
come to mind. The most reasonable of these is the idea of keeping your
shoulders and head facing straight down the hill (or direction of
travel). Your upper body _can_ provide added stability and leverage to
manage the slalom movement itself. Giving yourself this extra
stability will help a lot in avoiding an 'over-rotation' which happens
when you just ride the turn, and then try to go the other way...only
to find that your momentum wants to carry you around even further!

_Steering:_
I mention this first because it is _critical_ that you be able to
steer your skates without lifting them. As a point in fact, you will
not be able to do a free swinging one-footed slalom without mastering
this type of steering in one form or another. The following is a basic
practice move suitable for anyone, including novices.

One-footed slalom: (suggested method - author)

One of the simplest moves and most important ideas in skating (imho)
is the ability to do small slalom movements while on one foot.
Steering with one foot is _basic_ for doing stable cross-overs,
free-style, surviving a one-footed recovery, or...doing slaloms.

While moving at a slow glide on one foot, simply shift your weight
comfortably onto your heel. _Hey_, easy there! Just lift your toes a
bit. No need to try heel-walking yet! Now, simply use your body and/or
free leg to help point your toes in the direction you want to go.
Weave.

Note: I know I said one-footed, but I meant either foot. Practice
_both_! This is _easy_, my 7 year old does it. She found that she
needed to practice it to help her do controlled T-stops.

The basics of slaloming hinge on your ability to steer in some manner
similar to this. PLEASE TAKE NOTE!

_Safety thought:_
The 'feet side-by-side' stance used often in slaloming is probably one
of the more dangerous (from a front-to-back balance perspective)
things about it. The one-foot forward water-skiing stance makes a
great deal of sense when moving between smooth/rough pavement. In
either event, beware sand and water! It is also suggested that your
first attempts at slowing while going downhill be done on a _wide_
road with _no_ traffic. (nice grassy shoulders next to the road might
be a good idea as well) If you find yourself picking up speed instead
of slowing down, just continue a turn till you are coasting back up
the hill.

_Changing speeds:_ (This is where it gets interesting.)
In the process of 'carving' a turn (with both feet), you will find
that there is a point of compression. Adding pressure before the
furthest swing of each turn will increase (or help maintain) your
speed. Letting yourself 'give' just after the point will slow you
down. (if this reminds you of changing speeds while on a child's swing
then you might have the idea ;')

When going down a hill, simply doing a slalom is _not_ a sure way to
slow you down. It will probably keep you from going as fast as a
straight run, but that doesn't mean that you won't pick up enough
speed to lose control. Making your turns wider or 'deeper' will help
shed more speed because you are spending more time going diagonal or
crossing than heading down the fall-line. It is important that you
find the give-point (after compression) and learn to take full
advantage of it.

While practicing your slaloms, you may be tempted to try 'shreading'
some of your speed during each turn by unweighting the outside foot
and then shoving your heel outward with a bit of extra force. This can
help in slowing, but it is awkward and dangerous in execution. There
is a tendency for the heel to 'catch'. Fair warning!

Other pseudo-slalom moves:
* Linked cross-overs with a slalom type one-footed glide.
* Outside leans...use the opposing foot. (counter-intuitive...looks
great!)
* Catch the give-point of the compression, and use it for a 'spring'
type action. Care to try 'popping' a 360' in the middle of a hill?



_Just for fun:_
After you've proven to yourself that you can maintain or increase your
speed by pumping a slalom, try heading _up_ a narrow sidewalk. Amaze
your friends or passing motorists.
_________________________________________________________________



From pbr...@math.berkeley.edu
Date: Sat Sep 4 19:47:25 1993

I have a few comments to add. My skating is currently cross-training
for veldrome racing (bicycles), but I also have experience racing
slalom and GS.

One of the things that you leave out is the necessity of keeping one's
weight forward. That is, imho, the main use of poles in skiing. The
pole shouldn't be planted next to you; it needs to be planted _in
front_ of you. To maintain control in a slalom and use the "swing"
properly, your weight needs to be forward. My suggestion for practice
is skating by carving turns with alternate feet. The more you flex
your boot, the more your rear wheels drag, and the more speed you lose
on each turn.

To practice pole planting, sit in a chair. Sit forward a little, and
move your feet back some, keeping your feet flat on the floor. Now,
reach out with your hand and lean forward. See how that feels? Now try
it on skis at 50 mph...
_________________________________________________________________



From: Hank Hughes (thi...@ccs.neu.edu)
Date: Unknown

Jim Aites (j...@hpsmpk.lvld.hp.com) wrote:

Note: I know I said one-footed, but I meant either foot. Practice
_both_! This is _easy_, my 7 year old does it. She found that she
needed to practice it to help her do controlled T-stops.
The basics of slaloming hinge on your ability to steer in some
manner similar to this. PLEASE TAKE NOTE!



Very _true_ ... but

Another approach may be too shift the weight forward (onto the ball of
your foot). Start on a patch of grass/carpet with your feet in a
v-stance. Then lunge like a classic fencing champion by mimicking a
stroke, but keep the weight on the balls of your feet. You're more
nimble with the weight on the balls of your feet. Then lift the
trailing leg slowly.

_Concentrating on the final stance:_
With a lot of flex into the tongue of boot and knee, try to drop a
perpendicular from behind the support leg's knee down to the space
between the 1st & 2nd wheel. Basically, if you look down you should
_not_ be able to see your foot because your knee is in the way. To
balance, press on your outside toes to turn in, or press on your
inside `BIG' toe to turn out

_In motion:_
To steer, point your knee into the direction you wish to turn. This
rolls your ankle & center edge into the appropriate inide/outside
edge. Now you can grind through turns (& hear the whoosh from breaking
traction).
_________________________________________________________________



From: Robert Schmunk (r...@skatecity.com)
Written: November 28, 1994
Revised: October 20, 1995

Having become a regular at New York City's Central Park slalom course,
I guess I'm qualified to throw in some comments on the topic:

_The Course:_
The slalom course lies in the recreational lane of the Central Park
loop, between Tavern on the Green and the Sheep Meadow. Just skate in
the West 67th St. entrance to the park on a sunny weekend afternoon
and you can't miss it. Due to its location, the course has a good
slope and you don't have to get up much speed before you start down.
Slightly disconerting is that the slope is steepest in the middle of
the course, so that it feels like there's a "break" at about the ninth
cone. Depending on the trick, the slope sometimes means that you have
to "slalom faster" near the bottom of the course because the cones are
coming up at you much faster. The course also has a slight curve to
the right, which has been known to disturb visiting slalom skaters
from other towns.

The standard Central Park slalom course is a series of 27 cones,
spaced six feet apart. However, the number of cones has varied on
occasion; when the National Slalom Championship was held here in
October 1994, the course was 30 cones long. I've heard that in other
towns, slalom courses are sometimes only about 15 cones long, but my
guess is that future competitions will use closer to 30 because it
provides more opportunity for video-genic combination stunts.

When measuring off an area for a slalom course, don't forget approach
and exit areas. The Central Park normally has a 60-foot approach, with
skaters starting anywhere within that distance, but when pedestrian
traffic is light, it may be extended to 200 feet. Depending on how
fast you're moving and how hard you can brake, you will also need from
5 to 100 feet to stop.

Occasionally, when the expert skaters want to demonstrate how good
they are relative to those who are merely advanced (i.e., separate the
men from the boys), or if they want to compete against each other
without anybody else getting in the way, they will set up a course
with the cones spaced at smaller intervals. Most frequently the
distance is decreased to four feet, but lately there's been a lot of
experimenting with three-foot separation and an occasional attempt at
a vicious two-foot separation. We call such tight courses "technical
courses". A clean run through a 30-cone course with three-foot spacing
is just about the finest thing I've seen done on a pair of skates, and
provides great satisfaction if you can do it yourself.

The cone themselves are 8 or nine inches tall and made out of orange
plastic. The original square bases have been amputated. Cones of this
size are available in different hardnesses, but the harder kind is
best. Softer cones are less apt to fly away when you hit one, and they
often bend around your skate in what seems like a deliberate attempt
to induce a case of road rash on your exposed flesh. You can usually
get cones at sporting goods stores like Herman's, at around $2-$3 per
cone.

When the Central Park slalom course is not open, I've seen desperate
cone skaters rummage for pop cans, paper cups, or Gatorade bottles and
use them for cones, perhaps filling them with water to keep them from
blowing away. However, the height of regular cones can be
disconcerting if you've practiced a lot using pop cans, so if you're
serious about slalom skating, get some real cones.

_The Tricks:_
One nice thing about learning to slalom skate is that everybody's
interests diverge after the couple tricks, and if you stick at it for
awhile, you may be doing tricks that the pros (or at least the
supposed experts) have never learned. One woman I know devoted herself
to learning every conceivable variant of the forward criss-cross (see
below) and was doing things after six months that guys who have been
skating cones for four years couldn't do.

One last comment before introducing types of tricks: You'll likely be
wasting your time if you make your first attempt at many of these
tricks on a real slalom course. For example, if you can't maintain
your balance on one skate for ten seconds as you skate down a smooth
empty street, you're not going to be able to do a forward one-foot.
Even after having mastered most of the basic tricks below and a few
major variants, I usually practice new ones away from the cones, or on
a short course that only has six or eight cones.

Dividing into categories, there are:
* _Forwards tricks_

_Parallel:_
The first trick all slalom skaters learn, and you don't
need a set of cones to do so. Just place your feet next
to each other, with one leading by perhaps an inch or so,
and alternate which one is leading, thus introducing a
serpentine motion into the line of your path. The posture
for the rest of the body is very much like that used by
downhill skiers, and whenever a newbie me asks how to do
a parallel, the first thing I ask is "Do you ski?"
Some other tips: 1) Remember that ski instructors are
always reminding newbies to bend their knees. 2) Keep
your hands out but not up (i.e., below shoulder level)
and somewhat in front of your shoulders. Avoid waving
them around a lot, but use small adjustments like a
tightrope walker. And 3) on your first few tries,
concentrate on a clean skate all the way down the course
and don't worry about skipping a cone or three if it
makes you feel safer.
I also found that I got the smoothest parallel if my
knees were practically glued to each other. I jettisoned
my knee pads in order to attain this, but you'll have to
evaluate that safety decision for yourself.

_Monoline:_
Exactly what it sounds like. The skates form a straight
line, with the heel of one just ahead of the toe of the
other. This is a good next-step trick to learn after the
parallel.
A variant of the monoline which one frequently sees is
usually called a "telemark" due to its similarity to the
cross-country skiing posture. Basically, the trailing
foot is tilted so that only its toe wheel is touching the
ground. Usually the skater is crouched low to the ground,
often with one knee almost scraping asphalt.

_One-foot:_
One of the first tricks attempted though not always one
of the first mastered (some people just can't balance on
one foot through a 150-foot slalom), the one-foot brings
out the greatest variety in different approaches to doing
it, all of them valid. It's simply skating down the
course with only one foot on the ground, but the variety
comes in when each skater decides what to do with his
extra foot. Some hold it out to the side, some hold it
behind, some in front. Some use the extra foot like a
rudder, some kick like a Rockette, and some hold it like
a dead fish on its way to the garbage can.
Perhaps the coolest variant is the "flying eagle", in
which the extra foot is held behind you and you get down
in so low a crouch that its wheels may actually be above
your head. This can be an extremely fast maneuver, and if
you're of short, stocky build, you'll move like a bullet
and excite applause.

_Criss-cross:_
Using a scissoring motion of the legs, you cause your
skates to pass each cone on opposite sides, with your
legs crossed at every other cone. To do this, you'll
likely need to cock your hips so that one foot is always
ahead of the other and so that your skates don't bump as
you cross and uncross your legs. (Learning the forward
monoline is an excellent way of getting your hips in the
right location.) If your leading foot also has a brake
mounted on the heel, you'll need even more clearance.
Even though the criss-cross is one of the first few
tricks a slalom skater may learn, it seems to be one
which you _always_ have to pay a lot of attention to what
you're doing, because when your legs are crossed, there's
little room for recovery if something goes wrong. I've
banged up my left knee pretty badly from this.

_Cutbacks:_
This looks a bit like a criss-cross, but the crossing
maneuver involves lifting one skate entirely off the
ground and swinging it around behind the other before
putting it back down. Unlike a criss-cross, though, your
legs should be crossed at every cone.

* _Sideways tricks_
Getting your hips to turn out properly to do sideways maneuvers
requires differing levels of stress depending on your personal
anatomy. Some people can do this almost naturally; some can't do
it at all, no matter how hard they try. It took me a couple weeks
of practice and stretching to work up to a sidesurf; in the
meantime, I had a couple skate sessions which ended with my left
knee feeling wrenched because I was twisting it rather than my hip
joint. But just recently (Aug 1995), I had one of the best
speedskaters on the planet ask me for any tips I could give him on
sidesurfing because he'd been trying to learn it for months.
An exercise that helps is lying on the floor in a frog-like
position. Turn your hips out and bend your knees so that the soles
of your feet are up against each other. Now try moving your feet
inward (towards your body).

_Sidesurf:_
Think of this as a sideways monoline, with your trailing
skate oriented so that its toe is pointing from whence
you came. Because of the position that this puts your
body in, some people may call it a spread-eagle. However,
there is some room for variety, as some sidesurfers will
skate with their heels almost touching, and others will
hold them a couple feet apart; some skate standing almost
straight and others crouched down with derriere sticking
out.
A lot of sidesurfers use a pumping motion in their
leading arm to get their bodies to swing around the
cones, but with practice, you can turn a sidesurf into a
very graceful maneuver which requires only a little
movement by your leg muscles.

_Parallel sidesurf:_
Instead of the wheels all being in a line, the skates are
side-by-side but still pointing in opposite directions.
If your skates are right next to each other, it can be
very difficult to turn doing this trick, but if they're a
few inches apart, it's much easier. Your feet may keep
trying to drift apart into a regular sidesurf, so this
can be difficult hold.

_Independent:_
Again, skates are pointed in opposite directions, but a
scissoring motion is introduced so that the skates pass
the cones on opposite sides. I found the most difficult
part of doing an indy was getting my trailing skate to
come around, as my leg sometimes seemed to lock into one
position. (This may be a symptom that you're relying on
one foot to do too much of the work. Try to even it out.)
Getting low to the ground, almost sitting on the cones,
seems to help.
While the other sideways maneuvers can be done fairly
gracefully, the independent is almost always raw action.
If you really push it, you can actually accelerate quite
rapidly, so that an indy becomes one of the fastest
slalom tricks there is.

_Wave:_
Seemingly uses the same posture as the sidesurf and a
similar sort of zig-zag motion, but rather than follow a
single line, the skates are spaced fairly widely and pass
each cone on opposite sides, like an independent. Because
of the latter, it's also called the "out-of-phase
independent". It's certainly easier to do than describe.

* _Backwards tricks_
In order to see where he is going, a backwards skater can either
look over or under one of his shoulders. My choice was to twist my
shoulders so that they're oriented just about in a line with
cones, and I hold my leading hand (a) low so that I can look over
the shoulder and (b) out a bit so that I look towards it and see
the cones coming up rather than watch what my feet are doing.

_Monoline:_
Perhaps the simplest travelling backwards trick, and
possibly the one I've most frequently seen. When learning
this I found that it helps if the toe of the leading foot
and the heel of the trailing foot are not really close to
each other but are separated by six inches or so. This
allows some slight independence in the motion of the two
feet. After you've got the basic motion down, you can
bring your feet closer together and synchronize their
motion.

_Parallel:_
Many skaters who attempt this keep slipping into a
backwards monoline. I believe this is because of a
feeling that they are losing control as they speed up,
and a monoline is easier to do at such a time. One reason
for this statement is that I see more children than
adults attempt _and_ succeed at this trick, and
children's skates are notorious for having wheels that
don't spin very fast. Alternatively, maybe kids just
don't know the trick is "hard" and that they ought to
learn something else first.

_One-foot:_
Slaloming backwards on one foot is a real crowd pleaser
and also personally satisfying, so it's a good trick to
learn.
Like the forward one-foot, there is some variation in
what skaters do with the lifted foot, but not as much and
there is often a reason for the posture adopted. For
example, skaters who assume a backward one-foot by
approaching the course sideways often hold the lifted
foot so that it's wheels are perpendicular to the cones,
while those who approach skating backwards will hold it
so that the wheels are in a line with the cones. The
former style is useful when you are first learning the
trick because it allows you to move the entire lifted leg
(along with your leading arm) in a sawing motion that
shifts your weight so that you zig-zag around the cones.
On the other hand, holding the lifted foot in line with
the cones allows you to more easily put it back down the
same way so that you can continue skating backwards,
perhaps while doing a combination trick (see below).

_Criss-cross:_
Many practitioners feel this is easier to do than a
forward criss-cross because you have to cock your hips
anyway so that you can turn your head to see where you're
going. However, this presumes you know how to skate
backwards in the first place. I will admit, though, that
it seems safer to do a _fast_ backwards criss-cross than
a forwards one.
The leg motion in a backwards criss-cross is very similar
to that of a monoline, so if you're having trouble
learning one of them, try practicing the other. Odds are
that if you can master one, you can get the other fairly
quickly.

_Out-of-phase criss-cross (or backwards wave):_
Another hard-to-describe trick, like its cousin the wave.
It is similar to the backwards criss-cross because the
legs are crossed at every other cone, but unlike that
trick, it has a more zig-zag motion like the backward
monoline.

_Cutback:_
Similar to the forward cutback, but the crossing motion
is done by lifting and swinging the skates around in
"front" of you, by which I mean the direction you came
from. The basic motion looks sort of like a series of
crossover turns, but you happen to be traveling
backwards.

* _Tilted-skate tricks_
This is an awkward name for a category of trick variants in which
at least one skate has been tilted so that only one of its wheels
is actually touching asphalt.

_Extended and double-extended tricks:_
The word "extended" simply means doing one of the usual
tricks with one skate (almost always the leading skate)
tilted so that only the heel wheel is touching the
ground. Most common are extended sideways tricks,
particularly the extended sidesurf.
Some of the extended maneuvers are surprisingly easy to
learn _if_ you have removed the brake(s) from your
skate(s); I was able to do a clean 27-cone extended
sidesurf on only my third attempt (of course, I'd known
how to do a regular sidesurf for three months by then).
With a "double-extended" sideways maneuver, both skates
are tilted so that only their heel wheels are on the
ground. A double-extended sidesurf is rarely seen done
with any speed, but crowds think it's cool because it
always looks difficult (it is to an extent; it took me a
couple months to build up my thigh/groin muscles so that
I could do it). I've seen people do a forward parallel
with only the two heel wheels on the ground, which I
presume also counts as a double-extended trick (note: in
order to maintain stability, their skates are usually
spaced more widely than in a simple parallel).

_One-toe-down tricks:_
The close cousin of the single-extended trick, just with
one skate tilted so that its toe wheel is down rather
than the heel wheel. The most frequent example is a
forward monoline with the trailing foot tilted, which if
done in a deep crouch is, as noted above, often called a
"telemark". Another example is the reverse of this, a
toe-down backward monoline, with the tilted skate leading
the way.

_Toe-and-toe tricks:_
The only tricks I've seen completed and/or seriously
attempted with only the two toe wheels touching asphalt
are a forward parallel and a forward criss-cross, and boy
do they look awkward. I've also seen a couple goofing
around with a toe-and-toe sidesurf, but they never make
it past the second cone. And there is one person I know
who might be working up to a toe-and-toe out-of-phase
forward criss-cross; it's hard to say because he looks
almost totally out-of-control.

_Heel-and-toe tricks:_
This time, one skate is on its heel wheel only and the
other is on toe wheel only. They can be done forwards,
backwards and sideways. A _very_ popular heel-and-toe
trick is the forward monoline, but it requires building
up some strength in the calf of the leading leg (I still
can't do it but know several folks who can). Other
heel-and-toe tricks I've seen are the forward crisscross
and the sidesurf, plus an unsuccessful (but amusing to
watch) backwards criss-cross.

_One-wheel-only_ tricks:
At the October 1994 slalom skating championship in
Central Park, a French skater went down the course with
only one (heel) wheel touching the ground. There's a
photo of him doing it in the February 1995 issue of
_Inline_ magazine. Control on such a trick is difficult,
to say the least, and what might have been a knock-out
competition trick was marred by the five or six cones
that got knocked aside.

* _Combinations:_
A combination trick is simply that, a combination of tricks done
in a sequence. How many different tricks you attempt to do in one
run depends on how long your cone course is, and how many cones
you do with each trick. (At the Central Park course, we usually
require at least four cones per trick for the trick to count.)
Very often combos are signature moves; one NYC skater is
well-known for a forward criss-cross down the top half of the
course, followed by a 180° leaping jump into a backwards
criss-cross.
Not all combos are that difficult (or impressive), though; e.g.,
it's fairly simple to slide from a sidesurf into an independent.
Better skaters may even disguise a bad slalom run by converting a
trick about to go awry into an easier trick. Heck, I've done this
in competition and the judges never realized it.
* _Alternating tricks:_
An alternating trick is much like a combination trick, except that
the transition between tricks is done once every cone or every two
cones _and_ the skater alternates between two particular tricks.
Perhaps the most common example is an alternating forward
criss-cross, in which you alternate which foot is in the lead.
Thus, your right foot crosses in front of the left, then you
uncross, and then your left crosses in front of your right, etc.
If done well, this is a subtle trick, and spectators may think
you're just doing a vanilla criss-cross unless they're paying very
close attention.
Other examples I've seen are an extended alternating forward
criss-cross (the skater alternated which of her feet was crossing
in front of the other, but whichever was in front got tilted
upwards as soon as it started swinging around to the front), an
alternating backward criss-cross, an alternating backward
monoline, and what I call the Swiss monoline (because of the
nationality of the first person I saw doing it), in which the
skater alternates between a forward and backward monoline.
* _"Unclassifiable" tricks:_
Some tricks just don't fall very easily into the classifications
above. One such that I've seen is the "half Remy", in which the
skater was basically spiraling down the slalom course, doing a
180-degree spin around each cone (this implies that a full Remy
involves a 360-degree spin around each cone!). I got dizzy just
watching, and the skater looked a little ill when he finished. In
any event, it wasn't really a forwards maneuver or a backwards
maneuver. I presume that there are other tricks that can't be
easily pigeon-holed.
* _Ballistics:_
A ballistic trick is simply one of the above tricks done at high
speed. At the Central Park course this is done by launching from
100-200 feet from the first cone rather than the usual 30-60. A
ballistic flying eagle really hauls, and a ballistic backwards
combo is guaranteed to blow spectators away. Just make sure that
you have spotters watching to be sure that nobody blunders into
the course during your approach (this is a common problem in
Central Park).
* _Grapevines:_
The term "grapevine" apparently has a number of different
definitions in the skating world. The one that is most frequently
used at the Central Park slalom course is any slalom maneuver
which is done traveling _uphill_.
Some sort of self propulsion is obviously necessary in order to
keep your speed from tapering off, so the most frequent maneuvers
I've seen done on a positive slop are the backwards criss-cross
and the independent. However, I've managed to do an uphill
sidesurf, and I've seen others do uphill one-foots and backwards
parallels. The backwards criss-cross and independent are useful
for impressing spectators because, if done right, you can build up
some serious speed when doing them.
A good way to practice grapevines is to set up a _flat_ slalom
course, but make sure that it's long enough that you're not just
coasting through on your initial momentum. If you can accelerate
through a flat slalom course, you're ready to try an uphill
course.
Also, equipment can play a large roll in a successful grapevine.
Clean bearings and larger wheels help, as do lighter skates. I've
found that a grapevine independent is _much_ easier in Aeroblades
than in Lightning TRSes.
* _Pairs:_
There's pairs figure skating, so why can't there be pairs slalom
skating? Basically, it just requires two people skating the course
together while holding one or both hands. A popular example is for
the leading skater to do a backwards criss-cross while the
trailing skater does a forward criss-cross (this is often done
when the leading skater is trying to learn how to do a backwards
criss-cross). Exceptionally cool, are pairs doing backwards
_combos_. Tres cool!
And lest you think that there's a limit of two skaters doing a
trick together, three of the best Central Park skaters will
occasionally do a ballistic independent together. And occasional
groups of four or more skaters will get together to attempt a mass
maneuver, but more often than not this results in cones strewn in
every direction.



There are presumably many more maneuvers, or variants on the above,
but the problem is that the names for them may also be regionalized
(e.g., I've discovered that what New Yorkers call a criss-cross,
Bostonians want to call a crossover). Even within one locale there may
be more than name, especially if a trick has a lot of variants (e.g.,
the flying eagle variant of the forward one-foot), and a name based on
a combination of the above terms may have a special, fancy name. For
example, I've heard a backwards monoline called a "rattlesnake" and a
double-extended wave (wow!) is a "tidal wave".
_________________________________________________________________



_-rec.sport.skating.inline FAQs maintained by Tony Chen
(adc...@skatefaq.com)_
_-"Techniques: Slalom" edited by Robert Schmunk (r...@skatecity.com)_


_________________________________________________________________



_General Info_ _Techniques_ _Marketplace_ _Where to Skate_ Index
FAQs
Glossary
Wheels/Bearings
Clubs/Orgs
Rollerhockey

Stopping
Grinding
Vert/Jumps
Slaloms
Figure Skating
Racing
Buying Guide

Companies/Shops
Skate Reviews
Other Reviews
Western
California
Central
Northeast
Southeast
Abroad

_________________________________________________________________



Win FREE skating equipment!
_________________________________________________________________

Copyright Š 1991-1996 Anthony D. Chen (adc...@skatefaq.com)

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part6


_r.s.s.inline FAQ: Techniques - Figure Skating_
_________________________________________________________________

[LINK] -->

INLINE FIGURE SKATING

(Last changed May 31, 1995) by Jennifer Kretschmer (j...@rahul.net)

Here's the first group of "tricks" that I have been able to take from
ice figure skating and translating it to in-lines. I'll do one of each
rating. The ratings again are:

Beginner = *
Intermediate = **
Int/Advanced = ***
Advanced = ****

Tricks
* Swizzles *
* Spiral **
* 3 Turn ***
* Two-Foot Spin ****
* Waltz Jump ***
* Axels ****+
* Loop Jump ****

_Swizzles *:_
This is a move that can be used to skate forward or later to
skate backwards. (backwards requires your weight to be towards
the toe, and going forward requires weight toward the heels.)
It is good for building up groin muscles, and the inside of
your thighs. In swizzles, your feet do not leave the gound.
Start by gliding on two feet about 7-8 inches apart. Then allow
your feet to slide out while moving until they are about 24-28
inches apart. Here comes the harder part where your groin
muscles come in. Without lifting your feet off the ground,
glide and pull your feet back in until they are again 7-8
inches apart. Repeat the move over and over. You will soon gain
momentum, and the move will become easier to do with speed.

_Spiral **:_
This is a graceful move that you see figure skaters doing
often. This will be easier for more flexible people to do. It
requires good balance, so you should be able to skate on one
foot with ease before you try this. Gliding on one foot, point
your toe of your free skate and slowly lift your leg behind
you. Arch your back, and bend at the waist only. Don't throw
your body weight forward or you will loose your balance. You
shoud try to balance all of your weight on your skating leg. A
good spiral form is when you can get your free leg up higher
than your head.

_3 Turn ***:_
This is a move that allows you to turn backwards by skating on
one foot. This will require you to go almost onto one wheel
only for a split second. You will fall trying to learn this, so
be prepared. Once you get it, your friends will be impressed.
Use whatever foot you feel most comfortable skating on one
foot. Most people feel that this move is easiest if your
skating leg is your left one.

There are many types of 3 turns that deal with the "edge"
(direction), but right now I will just describe it generically.
Try holding onto something like a fence or bench when you first
try this, and watch your chin if you fall. I had a friend who
bumped her chin on a bench when she fell. Gliding on one foot,
allow your free foot to hang behind you. Swing the free leg
around slowly and shift your hips at the same time. Let your
foot rock up towards your toe, and swing it backwards at the
same time as your leg and hips go. You should now be skating
backwards on one foot.

_Two-foot Spin ****:_
This is so fun to do, but be prepared to get dizzy. This
requires you to be on only two wheels. You can do it on your
heels, on your toes, or the easiest on one toe and one heel.
Most people feel comfortable spinning counter-clockwise. This
is the common direction to spin in figure skating unless you
are left-handed and do everything in the opposite direction. I
will explain a right handed, toe-heel two foot spin like would
be done on ice.

You will be on the toe of your left foot and the heel of your
right and will spin counter-clockwise. Start with your arms out
to your side and feet slightly apart. "Wind up" by swinging
your arms 90degrees in the clockwise direction. This will turn
your body a little but don't let your feet move. All at the
same time, swing your arms back the other way and pop up onto
your toe heel position. Pull your arms into your body like your
are trying to hug yourself. This will make you spin faster. Let
your arms out to slow down and drop back to all your wheels.

_Waltz Jump ***:_
You should be able to do 180s before you try this one. I will
explain first how to do just the moves, with no grace attached.
However, this is a very graceful jump, and when done properly
almost gives the allusion of doing splits in the air. While
skating forward, glide on your left foot (if you are
left-handed or feel more comfortable skating on your right
foot, do the exact opposite as I describe). Begin rotating your
body counter clock-wise. Allow your free leg to come forward.
When your body is 90 degress and your foot is still forward,
jump off of your left skate. While in the air rotate you body
the last 90 degrees, change feet in the air and land on your
RIGHT skate backwards.

To add some more grace, let your right leg swing forward to
help you take off. Try this a few times holding onto a wall or
bench or couch, with your skates on or off. Getting your body
used to jumping off one leg and landing on the other is the
hard part of this trick. Once you get this jump down, then more
advanced figure skating jumps become easier to understand.

_Axels_
I've heard some poeple asking about axels on inline skates.
Although I mentioned before that I will only discuss those
figured skating moves that I can do on inlines properly, I will
talk about axels anyway. My main problem is landing on one
foot, so I two foot the landing. I tend to land with my weight
a little forward (an old habit I also had on ice) so that on
inlines, I roll up to my toe, and fall. I know that I can
correct if only I would keep my body straight, but old habits
die hard.

An AXEL is a ****+ maneuver on my scale. It requires excellent
balance, and a lot of strength to pull off on inlines. This
jump takes off forward off your left foot (outside edge),
rotates one and a half times (540 degrees), and lands on your
right foot (outside edge) going backwards. An important part of
the take off is usuing your free right leg to "kick" forward
helping you to take off. If you are new to trying this
maneuver, try doing it on carpet or grass without your skates
on. If you can't get the rotation without your skates on, you
won't be able to do it with the extra weight of your skates.
Another tip for the takeoff, is that most ice skaters like to
skate into the jump going backward, and then stepping forward
onto your left foot an immediately taking off. You can do it
this way, or from skating forward depending on your comfort. I
have noticed that most roller skaters do axels from a forward
skating position. Try both, and use the one that allows you to
get the most height and control.

_Loop Jump_
Here's a new figure skating maneuver it's called a loop jump. I
would consider this and advance jump to try. you must already
be able to do a 360 jump starting backwards and landing
backwards.

LOOP JUMP: is a jump where you take off backwards on two feet,
but land backwards on one foot. Skating backwards, scissor your
feet so that your left foot is slightly in front of your right.
Bend your knees deeply and glide in a counter clock-wise
circle. Take off on an outside edge on your right foot still
with your left foot trailing in front, and use your knee bend
to "pop" yourself into the air.

Turn your body in the air in a counter clock-wise direction and
pull your arms into your body (grabbing your left shoulder with
your right hand sometimes helps in the rotation). Also, while
taking off, lift your left leg up slightly higher than your
right ankle.

When you have completed the 360 rotation, land on your right
leg skating backwards on an outside edge, and allow your free
leg to extend behind you. (Like the way you see ice figure
skaters land) Remember to try this only when you can do a 360
in the counter clock-wise direction on two feet from backwards
skating to a backwards landing.

You will fall many times learning how to do this so please wear
protective gear including a helmet. The most common fall for
this jump is in the landing. If you lean forward, you will roll
up on your toe and do a face plant. Make sure that you bend
ONLY AT YOUR KNEES AND NOT AT YOUR WAIST! Keep your back
straight.


_________________________________________________________________

Other stuff

From: mi...@cnj.digex.net (timothy mizerak)
Newsgroups: rec.sport.skating.inline
Subject: Re: Figure Skating on InLines!
Date: 3 May 1995 22:21:45 -0400

>|> *** 3 TURN: This is a move that allows you to turn backwards by skating
>|> on one foot. This will require you to go almost onto one wheel only for
>|> a split second. You will fall trying to learn this, so be prepared.
>|> Once you get it, your friends will be impressed. Use whatever foot you
>|> feel most comfortable skating on one foot. Most people feel that this
>|> move is easiest if your skating leg is your left one. There are many

Most people are right-handed and prefer to rotate counter-clockwise, so that
would make the left outside 3 turn the easiest. The direction of turn is
very critical with 3 turns. You'll want to find your strongest direction
and stick with it until you have that mastered, then start learning the other
way.

>|> types of 3 turns that deal with the "edge" (direction), but right now I wil
l
>|> just describe it generically. Try holding onto something like a fence or

What really made the difference to my three turn was to *really* stress the
edge. My first 3 turn was the right outside, and once I realized that was
what I was trying to do, it started to come much easier. I had always been
holding a straight line and finding it so difficult. So, think about drawing
that 3 when you do this move and it will help.

>|> friend who bumped her chin on a bench when she fell. Gliding on one
>|> foot, allow your free foot to hang behind you. Swing the free leg around
>|> slowly and shift your hips at the same time. Let your foot rock up
>|> towards your toe, and swing it backwards at the same time as your leg and
>|> hips go. You should now be skating backwards on one foot.

This is basically it, but I can picture a lot of over-rotated turns. The
key is to set your arms and shoulders first, then to let the rest of your body
and foot complete the turn. I wouldn't stress the swing on the free leg
either as it would also seem to over-rotate or pull the whole thing off
balance. It's in the shoulders first, the hips second, then the foot.

Shooshie's advice to practice these with two feet at first is very good.
If you realize it or not, you have actually taught yourself two 3 turns that
way, one outside and one inside!


Timothy Mizerak, mi...@cnj.digex.com


On Tue, 2 May 1995, Shooshie wrote:
> I'm still pretty lame on 3-turns, but I'm in no hurry, and I notice
> improvement all the time. I do have a question for you. Do you "snap" your
> body around, or just gracefully turn it and snap your foot at some point
> in the turn? Also, when doing it in reverse (from backward to forward), do
> you still do it on your toes, or do you use your heel? I have done both,
> but I suspect that the heel version probably goes by another name. I've
> been needing to ask someone this... maybe you would help.
>

Shooshie,
I tend to do the slow, "graceful" move with my body turning and at the
last second when my body is almost backwards I "snap" my foot. I use my
arms too, but that's mostly from my figure skating traing when I had a
coach yell at me to keep my head up and my arms out to the side. I even
position my hands the way she used to make me.
The backwards one, I always did with my weight towards the heel, even on
ice. I'm not sure how you mean when you say you use your toes. If you
can go from backwards to forwards going up on your toe, I believe that
you have invented a new turn. I'll check my handbook to see if I can
find it. If not then we should call it a "Shooshie Turn!" I like the
sound of that.


_________________________________________________________________

*This image is Copyrighted Š 1994-1996 by Anthony D. Chen. Permission


is granted to use this logo in World Wide Web HTML files so long as
this copyright notice is included as either an HTML comment alongside
the invokation (IMG SRC or HREF or otherwise) of the logo, or in the
visible text.

The image may not be sold for profit, nor incorporated in commercial

documents or merchandise without prior written permission of the
copyright holder.

Copyright Š 1991-1996 Anthony D. Chen (adc...@skatefaq.com)

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part7


_r.s.s.inline FAQ: Techniques - Speedskating and Racing_
_________________________________________________________________

[LINK] -->

TECHNIQUES - SPEEDKSATING AND RACING

Table of Contents:
* Road Rash
* Lacing
* Boots
* General Race stuff
* Skinsuits
* Other Speedskating sites

(last changed Friday, 31-May-96 18:00:02 MDT)

Road Rash

From: ah...@boi.hp.com (Andy Hill)

Not a cure, but lots of Neosporin will help keep the rash from getting
infected (a big problem with large-area road rash). Makes the scabs
look really nasty, 'tho - be prepared for some really grossed-out
looks if you don't gauze it over.

From: g...@cbmvax.cbm.commodore.com (George Robbins)

There is no "cure".

The traditional treatment is to wash the area, let it scab over and
wait for it to heal. If there is a lot of imbedded dirt, glass or
gravel you want to see a doctor for extra pain and cleansing.

The underground remedy (for small spots) is to use "Bag Balm", a
vetrinary product for soothing cows udders, found at your local farm
supply outlet. It provides a waterproof covering for the wound, which
apparently prevents the formation of a thick, inflexible scab.
Actually Vaseline does pretty much the same thing, with people asking
you what breed of cows you prefer.

In either case, the overall healing time is simlar, however the latter
may cause less interference with skating, scarring and hassles with
scabs cracking or being torn off.

Another possibility is to use a "Newskin" type product, the one I've
seen comes in a bottle, you put it one, the alcohol (sting!)
evaporates, leaving a thin, flexible membrane, which seems to work on
the same idea as above, but it's dry on the outside, not gooky.

Please treat such wounds with respect, infection, scarring or
prolonged healing periods are always a possibility, especially with
larger area's of damaged skin or contamination.

From: ma...@unidata.ucar.edu (Matt Hicks)

Well, I checked out what everyone else suggested and I didn't see this
one exactly, so here goes. I have a friend who is a (semi?) pro speed
skater and has taken some nasty spills at high speed. Last year he
ripped up his right thigh/buttock when he hit a wet spot in a turn--it
was uuugly. Anyway, he used either neosporin or a burn creme (road
rash is 90% burn anyway) and he covered the wound completely with
plastic wrap held on with medical tape. There was nothing special
about the wrap--just Saran Wrap or the equivalent. I've had a lot of
rash from bicycle racing and I've never seen anything heal as quickly
or as well as this lump of hamburger did. He never got a scab going;
the wound just got smaller and smaller until it was gone. The main
thing you need to do with this treatment is clean the wound really
well--I'm guessing he probably cleaned it thoroughly twice a day
(morning and evening). The next time I get scraped up I'm going to try
this treatment myself--if nothing else it will keep the wound from
oozing through my clothes--yuck!

From: gt3...@prism.gatech.edu (Steven Malcolm Nichols)

Finally, on the subject of road rash. I've heard people advocate both
covering the area to try to keep a scab from forming and airing it. I
have tried both and don't really have a preference. I believe that the
most important thing you can do is keep it clean (i.e. wash/clean it a
couple of times a day) and of course, keep it from getting infected.
3M makes a product called second skin, I think the original
application was for burn victims. Second skin is something like 96%
water & 4% miracle plastic that acts as a skin. A couple of people
mentioned Neosporin; I was told by a paramedic that Neosporin in large
quantities can be toxic -- he couldn't really be quantitative about
what this means, but just be aware. I have found antecdotally (and
maybe I even read this somewhere) that sunlight seems to encourage
pink shiny scar tissue (dang! I'll never be a swimsuit model now!), so
you might want to let the rash heal up before you go tanning at the
beach.

From: prat...@david.wheaton.edu (Adam Pratt)

I do not have any quick fixes for road rash, though I have had a lot!
I mean a lot! Nine days ago I launched off a 4 and a half foot ledge
from one parking lot to another. There is about 12-15 feet of mulch
and bushes slanting between the parking lot I jumped from and the
parking lot below I was jumping into. It was an awesome jump, but at
the bottom, I did not quite make the pavement. My skates hit soft
mulch at the botom, dug in an inch, and my 10+ mph threw by body on
the pavement. Most of the weight hit my wrist guards and the front of
my helmet. If I did not have wrist guards on, I would have shattered
by hands, wrists, and forearms. It was intense! I could not hold all
my weight aand slid out on my right elbow and right hip (OUCH on the
hip!)

Anyway, I just wanted to share my awesome spill with you friends. It
was one of the most intense spills I have seen. Now back to the road
rash part...

I already had a scar on my right hip from a previous spill. Now I have
a bigger one. The way to get rid of it is to COAT it with vitamin E
oil. Do not wait for it to heal, then use it. Scrub it hard, ointment
like crazy, let it scab, and then DON'T pick! As soon as it is starts
to get hard, keep vitamin E oil on it constantly!

I have had two major surgeries on each shin and the cut me alle the
way up and down. I did not use Vitamin E the first time and the scars
were nasty. I used it the second time and you can barely see them! I
really believe this stuff helps! You can buy it at GNC and other
health food stores.

From:

After my first crash, where the Fire Department guys had to clean me
up, I started to cary first aid supplies (each crach statistic is a
statistic in favor of baning inline skating). I have the following in
my bag:

Large bandaids (2 in.) Gauze pads (for covering wounds and for
cleaning wounds) Anticeptic wipes Neosporin ointment

I even found use for these at the ice rink this past winter, when I
cut my self on my blades. Yes, I have goten road rash from the ice
rink although, I think it was where the elastic underwear band abraded
my skin.

From: ai...@lvld.hp.com (Jim Aites)

: Anticeptic wipes : Neosporin ointment

DERMABLAST - a spray-on topical anesthetic. (smaller container
required)

How about something for the 'shockies'? I hate seeing black-n-white
(with stars)! I know, "sit down and put your head between your knees",
but I was thinking of something more along the line of Asperin, a shot
of scotch, or some other good analgesic. ;)


_________________________________________________________________

From: gins...@sun.lclark.edu (Mark Ginsberg)
Newsgroups: rec.sport.skating.racing
Date: 12 May 1995 03:00:03 GMT

I race and fall off of bicycles far too often, and now to increase the
departure of my skin from my body I race skates too. so for road rash
there are a few things you can do.

1. Keep it clean, the day it happens take a bath in some
anti-bacterial soap (aka Laundry detergent -seriously!)

2. then thre are two theories I have seen:
2a. keep it dry. Let cuts air dry and scab up. yummy
2b. Moisture (buddy) keep covered with neosporin, or the like then
cover with saran wrap (sorry for all the name brands) and a big
bandage to soak up all the oozey stuff. Change dressing 2x a day or
more. I use both methods depending on where a cut is, I keep my hips
moist b/c they will heal faster that way, but be messier for the first
few days. my knees, they get to scab. keeps my mom upset 3000 miles
away!

Also to keep them moist you can by these product that look alot like
pre cut saran wrap with vetilation slits which you place over a cut
and leave on for 7 days, does the same thing, but looks a lot cooler,
so if chosing bandaging for looks check those out.


_________________________________________________________________

Lacing

From: Sir Erick (sire...@ix.netcom.com)
Newsgroups: rec.sport.skating.inline
Subject: Re: speed skate laces

In ez00...@rocky.ucdavis.edu (Michael
Kin Wong) writes:
>
>Is there anyone out there who has a method
>of making laces slip less as you are tightening
>them up? I've heard of waxing the laces...does
>this work and more importantly how do you do it?
>Other suggestions welcome...
> -mike

I don't know if this is even relevant but, when you tie your skates at
the top, you know, the crossover tie before you make the little bow?
Well, instead of doing one crossover, do two. This is called a
surgeons knot and it will hold tight while you make the pretty little
bow at the top. Get it? I hope so because without this knot, I'd
still be asking people to "put your finger here while I tie this
please"...


From: grams...@aol.com (GRamsey887)
Newsgroups: rec.sport.skating.inline
Subject: Re: speed skate laces
Date: 14 May 1995 21:50:20 -0400

>Is there anyone out there who has a method
>of making laces slip less as you are tightening
>them up? I've heard of waxing the laces...does
>this work and more importantly how do you do it?
>Other suggestions welcome...
-mike

While you might be able to wax laces, most people buy laces that are
pre-waxed. You won't find them at the mass merchants, but most of the
decent rinks or skate shops should have some.


From: ian...@ccnet.com
Subject: Re: speed skate laces
Date: 15 May 1995 07:26:20 GMT

Try the following lacing style if you haven't already.

top
-------o- +0++++++
\ +
+\
o++++++0
+
+ \
o------o
\+
+ \
o++++++0
+
+ \
o------o
\+
+ \
o++++++0
+\
+ \
o------0
bottom

Two points to keep in mind...

1. The diagonal laces are always underneath the laces going
straight across.
2. The laces that go straight across are always on the outside
of the lace holes.

+---------------+
======|== ==|======
----+ +----

To tighten, start at the bottom and pull each straight-across
lace tight working your way to the top. This pattern keeps
the tension on previous lace while you tighten the next.
The laces also tend not to come loose as easliy.

Hope this helps,


From: ma...@gladstone.uoregon.edu (R.Manes)
Subject: Re: speed skate laces
Date: Mon, 15 May 1995 08:55:04

I just wanted to second the notion of the waxed laces- my Raps boots came with
them, and they work. Another trick taught to me by the guy who sold me the
skates is to lace with the laces going down into the holes, rather than up
through them, as is conventional. This way you can adjust each lace crossing
to the tension you like, and it'll stay there since the down lacing sort of
locks it in place. Try it- you'll like it.


From: Glenn Rasmussen
Subject: Re: inline laces
Date: 15 May 1995 16:11:33 GMT

ez00...@rocky.ucdavis.edu (Michael Kin Wong) wrote:
> Is there anyone out there who has a method
> of making laces slip less as you are tightening

Try lacing your skates by putting the lace in the top of each eyelet. It
locks the lace down as you pull it tight. This is a trick I learn from
ice speedskating. I find it a very effective technique.



_________________________________________________________________

Boots

From: mr...@escape.com (Michael Rainone)
Subject: Re: Simmons Boot sources
Date: Sat, 13 May 1995 13:47:51 -0400

In article , dr...@athena.mit.edu
(Mark Drela) wrote:
> I'd like to get the Simmons boot, so...
>
> 1) Is there a local source near Boston?
>
> 2) Does anyone have the phone # for Simmons?
> I heard that you can order from them directly.
>
> 3) Is there a mail-order place that has them?
> I know you can get them from Team Paradise, but it's
> been over a month since I called for their catalog
> with no results.


Simmons fax # is 816.454.2668. I've heard that the Twister model is very
backordered. The most popular boot through Paradise is the Typhoon whic
is a lower cut, more like the Viking. I was lucky enough to have gotten
my Twisters last season. They are excellent boots, High Quality
materials and superb craftsmanship are Daves trademark. It's money well
spent.

From: ki...@iat.com (Kimon Papahadjopoulos)
Subject: Re: Viking Boots
Date: Tue, 04 Apr 1995 11:54:58 -0800

In article , ak...@cse.ucsc.edu (Adam Katz )
wrote:
> What are people's opinions of the Viking boots? The bont boot looks
> like it would give more ankle support, how much difference would this
> make? I would most likely get the non-moldable Viking boots, how should
> they fit?

I would definetly not recommend the Viking Marathon or Thermo for that matter
as a first racing boot because they really do have minimal ankle support.

This means that if you have never skated on racing skates before, it could
be a good long while before you will be able to skate faster than in your
four wheelers.

Also, because they have so little support and because they expand over
time, you should try to get the smallest size possible that will fit your
foot. Which means that unless you happen to have just the correct shape
of foot, the break-in time is both long and painful.

Furthermore, the Vikings use a variable distance mounting system which for
most sizes means that the frame you will buy will be incompatible with
other racing skates like the Bont. So the frame you buy for your Vikings
will probably not work for the next pair of skates you buy unless you buy
Vikings again.

On the plus side, Vikings are very well made and very precise skates. They
give you a lot of control (as long as your ankles don't get tired) and
because they have such low ankle support they will make you a better
skater, because you can't rely on the boot to hold your edge for you.

But even once you learn to use them, for most people they leave something
to be desired for the sprint (you know, the most important part of the
race) and in tight turns. I know several people who once they switched
away from Vikings say while they loved their Vikings, they are faster in
other boots.

In my opinion, Vikings are still useful as a training boots, but I think
you will see fewer and fewer Vikings on the starting line as boot building
know-how gets better. After all, Vikings are long track boots, and there
are finally some boot manufacturers that understand the subtle differences
that an inline boot requires.

For your first racing skate, I'd try the K2 Extreme Speed. It's being
sold in modular components, and the boot seems to sell for $200-$300 vs
>$400 for the Thermo. I saw several of them at the last race I went to
last week, including a friend of mine who was previously skating on the
Marathon. He likes them a lot, and had no trouble with them in the 27
mile race, and I think he got them last week. Now that's an
endorsement...

From: wonsu...@mail.utexas.edu (Wonsup Song)
Subject: Re: Viking Boots
Date: 5 Apr 1995 21:54:00 GMT

In article , icus...@teleport.com (Marc Abrams) says:
>
>Unless you are really going to be training 3 hour a day, I doubt
>whether you will develop enough ankle strength to skate competitively
>in Vikings. Look at the Fitness Fanatics Veloce or K2 Extreme Speed or
>2 Extreme boots. They fit much nicer than Bonts, are made better, and
>are less expensive. Give me a call if you have questions.


If you decide not to get Vikings because of the low-cut, I would not buy
2 Extreme boots either. 2 Extreme has no cuffs, and it took me for a while to
get use to it (I used to skate on Bont Hustler boots, now I use it for
In-doors). Go for Extreme Speed. They give you better lateral support than 2
Extreme (no support).

It is true (at least for me) that K2 fits better than Bont. But it does not
mean you should get K2. There are other fine boots such as Simmons(Great Boots)
.
Everyone's feet are different so some brand boots fit you better than others.

About the price of K2 2 Extreme, I paid $199(retail $339.95). It is the best
boots for that price range ($300-450 racing boots). I can buy Extreme Speed for

$189. So shop around.


From: ay...@yfn.ysu.edu (Martin Sripan)
Subject: Re: [INL] Narrow Feet
Date: 11 Apr 1995 13:07:28 GMT


When I bought my ski boots (later returning them) the specialists
at the shop told me that they could expand or contract the plastic
in the boot, specifically fitting it to my needs. When I bought
my Roces CDG '94 the booklet that came with it gave information
on a RPF [Roces Personal Fit] which is essentially a system to
inject silicon(e) into the boot liner, which later hardens.
There is also the ThermoFlex which can be used in some boot shells,
but it costs about $150.


_________________________________________________________________

Racing Frames

From: me

Some people have asked what the difference is between the various
types of racing frames. Here's all I know (which may not be 100%
correct). The frames tend to be made in three ways:
* _Stamped and folded:_ A flat piece of metal is stamped out and
then folded to make the frame (cheapest)
* _Extruded:_ the metal is extruded into some sort of molding
(moderately expensive)
* _Machined:_ the frame is cut directly from a block of metal (most
expensive)



Most of the mid/high-end frames out there tend to be extruded. As far
as I can tell most of the pros use extruded frames, so they ought to
be fine for most anyone. You may see the term "triple-extrusion". I'm
not sure what this means. Maybe they have some sort of 3-step process
to extrude the frame.


_________________________________________________________________

General Race Stuff

From: sim...@eeel.nist.gov (Eric Simmon)
Subject: Re: [INL] Race question..
Date: 6 Apr 95 20:25:01 GMT

eig...@uiuc.edu (Amy Ryan) writes:
>I have only participated in traditional distance races, but they are
>going to sponsor a criterion (sp????) locally. They say its 25 minutes
>and then 2 laps... I read an article about a similar race at the PanAm
>games.. can someone explain exactly how these races work?

A criterium is (originally) a type of bicycle race.

The course is usually .6 to 1.5 miles long (ie. short)
with sharp corners (usually around a city block or two).
The races are usually fast paced, with a lot of body contact.
There can also be preems (sp) (premiums) which are prizes given at
different points in the race to whoever is first at that
moment (usually given at the halfway point). they are
great spectator races because the cyclists come around once
every couple of minutes instead of once (as in a road race).

As far as the 25 min + 2 laps goes, this just means you race
for twenty five minutes, at which point you have two laps to
finish.

Strategy:

Stay near the front of the pack drafting as much as you can, while
keeping the leaders close by. If one or two people make a breakaway,
let them go (unless you KNOW they are strong enough to stay out front
the rest of the race). If a larger group makes a breakaway, and
you feel good, jump on it, just be prepared to do your share of pulling
(skating in front so others can draft). Try to conserve strength
as much as you can. Criteriums usually come down to a sprint finish,
so your best chance of winning is to stay fresh and be in good
position for the finish. Unless you feel strong enough to just
break away and leave everyone in your dust. One other thing: turning
is key! I was in a inline race where the eventual winner was a beginner
ice track skater (the rest of us where distance skaters). He got out front
near the beginning of the race and because his speed was greater in the
corners (and he didn't have to watch out for people around him) his
lead just got greater through every corner.


_________________________________________________________________

Skinsuits

From: wonsu...@mail.utexas.edu (Wonsup Song)
Subject: [INL][SPEED] Skin Suits for In-line skating?
Date: 18 Apr 1995 05:06:04 GMT

I have been speed skating for a while but, I was never concerned about what I
wear. I usually wear a Lycra/Nylon tight shorts and a bycicle jersey (I bike
too). It worked fine for me so far. My friend Dean who races for Team K2 wears
this cool purple skin suit. He told me it was made especially for K2 racers by
Pearl Izume. He said that, what you wear makes a big difference in air
resistance and dragging.

Out of curiosity, how many non-profesional skaters out there wears skin suit?
O.K. what do you speedsters wear? I know all these professional skaters from
team Rollerblade, K2, Hyper, etc all wear these skin suits. I heard it reduces
about 5% of the air-resistence than normal tight clothes. Does it make a big
difference? or would it give me about same effects as wearing Lycra tight
shorts and bike jersey?

Where do people get one? I am talking about skin suit especially made for
In-line skating because these bike skin-suits have pads in the middle and I
don't like it. How much do they cost? I know bike ones cost about $99. Who
makes one?

Do they have back pockets like bike jersey, to put watter bottles, keys and
stuff? One thing that I don't like about bike jersey is that I can't put my
water bottle in the pocket. Everytime I go up hills or speed up(swinging both
of my arms), the bottle in my back pocket would swing left and right and
through me off rhythm (because it moves left when I move right, and right when
I move left). So I ended up holding the bottle in my hands all the time. Does
skin suit has same problem or they hold stuff better? (All the skin suit that
I have seen didn't have back pockets though)

Where do professional skaters put their watter bottles? ( I guess for long
distances such as N.Y. 100K and Athens to Atlanta 85miles,etc ) Or maybe they
don't carry ones around? I saw Eddy Matzger holding these watter bottles in
his hands and racing for pretty long distance/time.


From: eh...@fwi.uva.nl (Erik de Haas)
Subject: Re: [INL][SPEED] Skin Suits for In-line skating?
Date: 18 Apr 1995 14:21:50 +0200

> Out of curiosity, how many non-profesional skaters out there wears skin
suit?
>O.K. what do you speedsters wear? I know all these professional skaters from
>team Rollerblade, K2, Hyper, etc all wear these skin suits. I heard it reduces
about
>5% of the air-resistence than normal tight clothes. Does it make a big differe
nce? or
>would it give me about same effects as wearing Lycra tight shorts and bike jer
sey?
>


Hi,

Here all (even remotely) serious ice speed skaters wear skin suits, at
least in the races. For marathon
and very long distance there are even skin suits that have pockects at the
back (approximately in the place where the pockects are on cycling clothes).
In summer, with nice wheather, on inlines, these suits are a little too warm,
I would think. That is where those skinsuits you mentioned come in handy
(short sleeves and legs). Here (in Holland) I only saw those suits at
races. But almost all the racers wear them, (we do not have any proffesionals
here, only some good inline skaters get sponsors for cloathing and
equipment). When on ICE I changed from 'tight' cloating to a skin suit, I
instantaniously smashed my personal records. It does make a difference.
In summer, on 5-wheelers, I never squeezed myself into a skin suit. But then
I do not race on my inlines; I only use them in summer for training, for
remembering how it should be done on ice in winter.


Erik de Haas
Dept. of Mathematics and Computer Science
University of Amsterdam
The Netherlands
http://carol.fwi.uva.nl/~ehaas/


From: stick...@aol.com (SticksSk8s)
Subject: Re: [INL][SPEED] Skin Suits for In-line skating?
Date: 19 Apr 1995 00:09:31 -0400

Skin suits are alot more comfy that bike shorts! Also, they DO keep you
cool in the summer, since your sweat will evaporate off the lycra pretty
quick. Most custom made suits can be made with a pocket in the back for a
water bottle. I've gotten suits made by a place called Young
Originals...517-688-4860. Call them and they'll send you a catalogue, all
you need to do is pick out a design (one of theirs or one of your own),
the colors, and send them your measurements. An inline suit with short
sleeves and legs cost from $50-70 depending on the designs. Right now I
get them made by a woman in the area who also makes artistic skating
outfits, you might want to check out local skate rinks to see if they have
anybody who does the same. Good luck!!

--karen

From: "K. S. Manning"
Subject: Re: [INL][SPEED] Skin Suits for In-line skating?
Date: Wed, 19 Apr 1995 19:56:55 GMT

Don't steer clear of cycling clothing entirely. I'm coming
off a long period of bike racing, so I have lot's of shorts.
I have found it little trouble to take the chamois (the "pad")
out of the shorts using a seam-ripper (available at any fabric/
sewing shop).

I now wait for Performance to have a clearance sale, get a pair
of cheap cycling shorts or a skinsuit, and take the chamois out.

BikeNashbar's sales seem better but less frequent.

Performance 800-727-2433
Nashbar 800-NASHBAR



Other Speedskating sites:
* http://www.ph.tn.tudelft.nl/~aarnoud/speed
* http://www.pair.com/manning/
* Athens-2-Atlanta Home Page

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part9


_r.s.s.inline FAQ: Marketplace - Manufacturers and Mail-order Shops_
_________________________________________________________________

Click for $3 wheels! [LINK]

MARKETPLACE - MANUFACTURERS AND MAIL-ORDER SHOPS

Companies and Organizations
* Inline skating organizations
* Original equipment manufacturers (OEMs)
* Bearing companies (Tuesday, 16-Jul-96 15:25:47 MDT)
* Wheel companies (Sunday, 04-Aug-96 22:35:29 MDT)
* Protective Gear
* Accessories and Stuff
* Magazines

Mail-order Shops and Instructors
* General mail-order shops (Wednesday, 31-Jul-96 08:43:48 MDT)
* Hockey mail-order shops (Monday, 12-Aug-96 09:30:12 MDT)
* Racing shops
* Inline Instructors (Thursday, 06-Jun-96 16:12:31 MDT)


_________________________________________________________________

(last changed Wednesday, 04-Sep-96 07:05:18 MDT)



Inline Skating Organizations

_INTERNATIONAL IN-LINE SKATING ASSOCIATION_
5101 Shady Oak Road
Minnetonka, MN 55343
800-FOR-IISA
(this could be an incorrect address, as of January 1994, I had heard
they were moving to Atlanta)

_ROLLER HOCKEY INTERNATIONAL_
[Day-to-day office]
5182 Katella Ave., Suite 106
Los Alamitos, CA 90720
310 430 2423
310 431 2928 fax

[Executive office]
13070 Fawn Hill Drive
Grass Valley, CA 95945
916 274 0923
916 274 1115 fax

_NATIONAL INLINE HOCKEY ASSOCIATION (NIHA)_
See the complete NIHA info in the rollerhockey section (part 7).

Canada, 1-800-668-NIHA or (403)455-6442 (Edmonton)
United States, 1-800-358-NIHA
FAX: 305 358 0046

See also the list of NIHA sponsors.

_WORLD ROLLER HOCKEY LEAGUE_
6358 N. College Avenue
Indianapolis, IN 46220
317 283 2900


_________________________________________________________________



SKATE MANUFACTURERS

_BAUER_

Canstar Sports USA Inc.
50 Jonergin Drive
Swanton, VT 05488
800 750 1713 in VT
800 362 3146
800 451 5120
802 868 2711
802 868 4713 fax

Canstar Sports Group, Inc.
6500 Millcreek Drive
Mississauga, ON L5N 2W6
905 821 4600
905 821 1860 fax

Canstar Sports AG
Talgut-Zentrum 19
CH-3060 Ittigen
Switzerland/Suisse/Schweiz
+41 585886/585887
+41 31 586375 fax (this number is suspicious, but I'm reporting it
verbatim)

_CCM_

Maska U.S. Inc.
Box 381
Pierson Industrial Park
Bradford, VT 05033

Sport Maska Inc.
7405 Trans-Canada Highway, Suite 300
St.-Laurent, QC H4T 1Z2
514 331 5150
514 331 7061

_ROCES_

Exel Marketing, Inc.
1 Second Street
Peabody, MA 01960
800-770-8750
800-521-2011 (Store Locator Service)
508 532 2226
508 532 3728 fax

Exel Marketing, Ltd.
56 Churchill Drive
Barrie, ON L4M 6E7
705 739 7690
705 739 7684 fax

[also the following]
9 rue Plateau
Pointe Claire, QC H9R 5W1
514 694 1077
514 694 3284 fax

Roces srl
Via G. Ferraris 36
31044 Montebelluna
Italia
+39 423 609974 r.a. (r.a. means automatic searching of a free line
(when there are multiple lines with the same number)
+39 423 303193 fax
Email: ro...@riv.nl
WWW: http://www.riv.nl/roces/, _ROLLERBLADE_

Rollerblade, Inc.
5101 Shady Oak Road
Minnetonka, MN 55343
800 232 ROLL
800 68 BLADE (?)
612 930 7000
612 930 7030 fax
WWW: http://www.rollerblade.com/, http://www.rollerblade.ca/
(Rollerblade Canada)

Benetton Sportsystem Inc.
3520 Alphonse-Gariepy
Lachine, QC H8T 3M2
800 661 ROLL
514 631 6331
514 631 1005

_K2_

K2 Corp. - (800)345-2754
Email: gens...@k2sports.com
WWW: http://www.k2sports.com

_Mojo_

8335 Nieman Rd.
Lenexa, KS 66214
Voice: 913-438-MOJO (6656)
Fax: 913-438-4749
Email: moj...@tyrell.net
WWW: http://www.tyrell.net/~mojousa/

_OXYGEN_

Atomic for Sport (Atomic Ski USA)
9 Columbia Drive
Amherst, NH 03031
800 258 5020
603 880 6143
603 880 6099 fax
Email: ato...@globalsports.com
WWW: http://www.Globalsports.com/oxygen/inline.html

Atomic Ski Canada
Somewhere in Mississauga, ON
905 569 2300
(U.S. 800 number works in Canada)

_ULTRA-WHEELS_

First Team Sports, Inc.
2274 Woodale Drive
Mounds View, MN 55112-4900
800 458 2250
612 780 4454
612 780 8908 fax

Email: ultr...@ix.netcom.com
WWW: http://www.ultrawheels.com/

_Riedell_

612-388-8616

_V-line_

Phone: 800-511-0054
Email: vline...@aol.com
WWW: http://www.shadow.net/~si/vline.html
_FireSkates_

Email: ska...@europeonline.com
WWW: http://www-city.europeonline.com/cyberhome/skates/


Pads:

* Rector: 800 248 5633
* Boneless: 801 627 3292
* Pro Designed: 713 957 0341

Grind plates:

* CDS Detroit - 1-313-331-7371
* A.T. Soul Plate, 15 Camelback Ct., Pleasant Hill, CA 94523, WWW:
http://www.seas.ucla.edu/~stead/, Email: ast...@ucla.edu

Videos:

* Anywhere Sports: 1-310-825-5464 (NISS '94 video)
* Mar Productions: 1-800-775-5507
* Video Groove Productions: 1-800-960-8486
* Video Action Sports: 1-800-727-6689
* _pimpin' Sports Action Video_
367 North Acacia Ave.
Solana Beach, CA 92075
(800) 484-6011 ext.1648
fax (619) 794-1648
http://www.pimpin.com



Accessories:

_Sonic Sports_
10753 W. Pico Blvd., Suite 283
Los Angeles, CA 90064
phone: 310-216-4027
fax: 310-216-4028
Email: BES...@aol.com
WWW: http://www.sonicsports.com


_STREET LINE_ (accessories)
Charlie Parcells
313 331 7371
Char...@Delphi.com


_Rollerbands_ (skate carrier), by Spaztech Designs
2583 River Plaza Dr No.154
Sacramento, CA 95833
Tel: 1-916-641-6034
http://coe-info.cen.uiuc.edu/international/plackmann/spaztech.html


_Earhuggers_ (earphones designed for active sports)
mailto:Earhu...@aol.com
Chris Henry


_Ramptech Design and Construction_
7015 Westmoreland Road
Falls Church, VA 22042
703-573-RAMP
703-560-VERT fax


_Blade Blox_ (wheel covers to let you walk on your skates)
http://www.t-mark.com/t-mark/Blade_Blox/blox.html
Blad...@aol.com

_Border Patrol_ (portable rollerhockey rink perimeter) In-Line
Sport Systems, Inc.
821 Marquette Ave., Suite 2300
Minneapolis, MN 55402
800-809-RINK
612-342-2337
612-338-2302 fax


_Paragon Racing_ (lubricants, bearing guards, accessories):
1-800-328-4827 ext.4656

Email: par...@cosmos.de
WWW: http://www.cosmos.de/paragon/

_SKIDS_: (toe brakes) 1-800-766-9146





INLINE SKATING MAGAZINES

(last changed 07-30-1996, 15:15)
_1st In-line Magazine_
Editor : benj...@dircon.co.uk
WWW: http://www.demon.co.uk/nbcs/first.html


_Daily Bread_
280 Highland Rd., Laguna Beach, CA 92651
Phone: 714-497-2636


_Grommits_
Editor : ke...@telepath.com
WWW: http://www.telepath.com/kelly/grommits


_Inline Retailer_
2025 Pearl St., Boulder, CO 80302
Phone: 303-440-5111
Fax: 303-440-3313


_Inline Skater_
4099 McEwen, suite 350, Dallas TX 75244-5039
Editor : ilskat...@xcscx.com
Subscriptions : ilskat...@xcscx.com
WWW: http://www.xcscx.com/skater/


_Inline: The Skate Magazine_
PO Box 527, Mt. Morris, IL 61054 U.S.A.
Phone: 800-877-5281
Fax: 303-440-3313
Editor : nat...@aol.com
Subscriptions : nat...@aol.com
WWW: http://www.inlinemagazine.com


_Roller Hockey Magazine_
12327 Santa Monica Blvd. Suite 202, Los Angelas, CA 90025
Phone: 310-442-6660
Fax: 310-442-6663
Editor : in...@rhockey.com
Subscriptions : in...@rhockey.com
WWW: http://www.rhockey.com


_Skatermag_
Phone: 01993 811181
Fax: 01993 811481
Editor : 10051...@compuserve.com
WWW: http://www.demon.co.uk/nbcs/skatermag.html


_Speedskating Times_
2401 N.E. 15th Terrace, Pompano Beach, FL 33064
Phone: 954-782-5928
Editor : speed...@aol.com
Subscriptions : speed...@aol.com


_Stealth Rail_
Editor : sch...@elysian.net
WWW: http://wwwhome.elysian.net/~schmeee/skate.htm



_________________________________________________________________



$3 wheels!

-->
_________________________________________________________________

GENERAL MAIL ORDER SHOPS

(last changed 07-31-1996, 8:43)
(Only companies with Web sites and/or email addresses are listed)
_1888WWSports_
1888WWSPORTS, Route 1 , North Hampton, NH 03862
Phone: 1888wwsports
Fax: 1-888-SPORTS99
Email: sa...@1888wwsports.com
WWW: http://www.1888wwsports.com


_Alliance Inline_
Phone: 1-888-SK8DEAL
Email: web...@worldnet.att.net
WWW: http://www.sk8deal.com/


_Awesome Inline Shop_
Phone: 800-460-1218
Email: awei...@sccsi.com
WWW: http://www.webvertising.com/Inline/


_B In-line_
1908 Bardstown Road, Louisville, Ky 40205
Phone: 502-456-9785
Email: chr...@ntr.net
WWW: http://www.binline.com/


_Big Deal_
1822 N. 12th Street, Phoenix, AZ 85006
Phone: 800-406-3325
Email: inl...@bigdeal.com
WWW: http://www.bigdeal.com/inline


_Campus Skate Co._
605 East 13th Avenue, Eugene, Oregon 97401
Phone: (541) 683-3516, 1-800-452-3516
Fax: (541) 343-9277
Email: to...@efn.org
WWW: http://www.efn.org/~tonys/skateshop.html


_Corner 24 Surf Shop_
211 24th Street, Virginia Beach, VA 23451
Phone: 804-458-3389
Email: dwdk...@norfolk.infi.net
WWW: http://www.dyntec.com/surfshop/


_Cutting Edge Sports_
Charleston, SC
Phone: 803-571-4333
Email: cuted...@aol.com


_Edge Sports_
2840 Harrisburg Way, Colorado Springs, CO 80922
Phone: 719-597-5176
WWW: http://206.100.86.2/edge/


_Fast Forward_
Phone: 800-557-7655, 608-271-6222
Email: ska...@fast-forward.com
WWW: http://www.fast-forward.com


_Freedom Sports_
412 S. Main, Grapevine, Texas 76051
Phone: 817-488-7914
Fax: 817-481-2880
Email: fre...@fs3.com
WWW: http://www.fs3.com/freedom/


_Inline Skate Source_
5711 Holiday Road, Buford GA 30518-1520
Phone: 888-532-3483
Fax: 770-822-0580
Email: ska...@lanier-dive-center.com
WWW: http://www.mindspring.com/~ldc/SKATES/


_International Roller Sports_
2823-A Watson Blvd. Suite 219, Warner Robins, GA 31093
Phone: (912) 953-5444
Email: 7244...@CompuServe.COM


_Island Skates_
13th Street Beach Haven, NJ 08008
Phone: 800-92Blade
Email: skate...@aol.com


_NYC SKATE_
128 Chambers St., New York, NY 10007
Phone: (800) NYC-SKATE
Fax: (212) 964-5548
Email: nycs...@aol.com
WWW: http://www.nycskate.com/


_NetSkate_
239 Prairie Drive, Madison, AL 35758
Phone: 800-595-8560
WWW: http://www.netskate.com/


_Obsession Watersports_
222 N. Federal Highway, Dania, Florida 33004
Phone: 305-921-5802
Fax: 305-921-5803
Email: big...@aol.com
WWW: http://www.gate.net/~webpro/obsession/sports.htm


_On The Beach Surf Shop_
652 Redwood Drive, Sand City, CA 93955
Phone: 408-899-9283
Email: dam...@redshift.com
in...@carmelnet.com
WWW: http://www.carmelnet.com/otb/


_Palo Alto Sport Shop & Toy World _
526 Waverley Street, Palo Alto, CA 94301
Phone: 415-328-8555
Fax: 415-328-4429
Email: pass...@hooked.net
WWW: http://www.thirdplanet.com/PASSTW/pass.html


_Performance Bicycle_
Phone: 1-800-727-2433
WWW: http://www.performanceinc.com/PerfBicycle.html


_Planet Mars_
18459 Pines Boulevard, Suite #174, Pembroke Pines, Florida, 33029
Email: plnt...@ix.netcom.com
WWW: http://www.gateintl.com/PlanetMARS/


_Power Play Inline_
Phone: 805-543-5154, 805-473-0282
WWW: http://www.itsonthenet.com/powerplay/


_Pro Look Sports_
1350-1356 Third Street Promenade, Santa Monica CA 90401 (LA and Long
Beach too)
Phone: (310) 657-7091, 395-9055, 983-7670
WWW: http://www.thirdst.com/pro-look


_ReRun Sports_
Atascadero, CA 93422
Phone: 1-800-555-3936
Email: re...@comptec.com
WWW: http://www.comptec.com/~rerun/


_Rocky Mountain Bikes and Blades_
Star Ranch Plaza, Colorado Springs, CO 80906
Phone: 800-720-2055
Email: rm...@rmii.com
WWW: http://www.rmii.com/rmbb/


_Roller Warehouse_
7236 Owensmouth Ave, Bldg A, Canoga Park, CA 91303
Phone: 800-772-2502
Fax: 818-348-3281
Email: sk8...@ix.netcom.com
WWW: http://www.rollerwarehouse.com


_Skates Away_
Phone: 800-416-2565
Email: g...@dnai.com
WWW: http://www.dnai.com/gui/skatesproductinfo.html


_Skates on Haight_
P.O. Box 170010, San Francisco, CA 94117-0010
Phone: (800) 554-1235, (415) 244-9800
Fax: 415 873 0200
Email: lee...@aimnet.com
WWW: http://www.skates.com


_Snow N Skate_
133 South Livermore St. Livermore, CA 94550
Phone: 510-294-4001
Email: de...@interramp.com
WWW: http://www.snownskate.com


_Snowshoe Ski Haus_
410 Mineral Ave., Libby, Montana 59923
Phone: 1-800-293-3895, 406-293-3890
Email: ski...@libby.org
WWW: http://www.libby.org/skihaus/inline.html


_SportWerks_
P.O. Box 26755, Minneapolis, Minnesota, 55426, U.S.A.
Phone: 612-922-5478
Fax: 612-922-2911
Email: rsak...@sportwerks.com
WWW: http://www.sportwerks.com/info/


_SportsFlex_
Phone: (514) 426-4701
Fax: (514) 332-7736
Email: I...@Sportsflex.com
WWW: http://WWW.Sportsflex.Com/


_Sportsnut Bike and Skate_
Phone: 800-237-6635
Fax: 808-486-6494
Email: spo...@aloha.net
WWW: http://planet-hawaii.com/sportsnut/


_Sportworks / ICU Skate_
421 SW 2nd Ave, Portland, OR 97205
Phone: 800-362-3434
WWW: http://www.sportworks.com/~sportworks


_St Moritz Ski and Sport_
1166 Kenny Center Mall, Columbus, OH 43220
Phone: 614-451-0081
Email: j...@infinet.com
WWW: http://www.infinet.com/~jan/skate.html


_Team Paradise_
Phone: 800-756-5629
Email: tmpr...@ix.netcom.com
tmpr...@pacbell.net
WWW: http://www.teamparadise.com


_The Cheapskater_
Phone: (800) 419-6646, (212) 226-6566
Fax: (212) 489-7235
Email: webm...@cheapskate.com
WWW: http://www.cheapskate.com


_The House_
Phone: 1-800-992-7245
Email: ran...@proteon.inet-serv.com


_The Wright Life_
200 Linden, Ft. Collins, CO 80524
Phone: 800-321-8833, 970-484-6932
Fax: 970-484-6932
Email: bwr...@wrightlife.com
WWW: http://www.wrightlife.com/


_Vertical Inline_
2124 West End Ave., Nashville, TN 37203
Phone: 800-401-7661
Fax: 615-327-0357
Email: ree...@nashville.net
WWW: http://www.nashville.net/~visual/inline.html


_Wright Life_
200 Linden Street, Fort Collins, CO 80524
Phone: 970-484-6932, 800-321-8833
Fax: 970-484-6932
Email: bwr...@wrightlife.com
WWW: http://www.wrightlife.com/


_Your World Sports_
Beachwalk on Highway 101, Solana Beach, CA
Phone: 619-755-7882
Email: yws...@sd.znet.com
WWW: http://pm.znet.com/ywskate/



_________________________________________________________________



HOCKEY COMPANIES AND SHOPS

(last changed 08-12-1996, 9:30) _Boston Hockey Company_
161 Portland Avenue, Dover, NH 03820
Phone: 1800-FACE-OFF
WWW: http://www.1800faceoff.com/


_Cyclone Taylor Sports_
6575 Oak Street,Vancouver, BC, CANADA V6P 5M9
Phone: 800-665-2188
Fax: 604-266-3301
Email: cyc...@webdirect.ca
WWW: http://www.cyclonetaylor.com


_Delaware Valley Hockey Supply_
431 Valley Forge Road,King of Prussia, PA 19406
Phone: 800-852-6143
Email: mi...@interstat.net
WWW: http://www.delvalhockey.com/


_Falcon Sports_
Phone: 715-235-8830
Fax: 715-235-8875
Email: Fal...@PlanetSports.com
WWW: http://planetsports.com/hockeyworld/FalconSports/


_Fast Action Sports_
Playland Parkway Rye, New York 10580
Phone: 800-282-0680
Fax: 914-921-2370
Email: comm...@fastaction.com
ord...@fastaction.com
WWW: http://www.fastaction.com/


_Itech_
Email: it...@globalsports.com
WWW: http://www.globalsports.com/itech/


_Mostly Hockey Barrie_
Phone: 800-580-9929
WWW: http://WWW.barint.on.ca/mostly/hockey.html


_Ocean Hockey Supply_
197 Chambers Bridge Road, Brick, NJ 08723-34892
Phone: 800-631-2159
Fax: 908-477-1167


_Ozone racing frames_
Email: syah...@indosat.net.id
WWW: http://hasana.pair.com/


_Power Play Inline_
Phone: 805-543-5154, 805-473-0282
WWW: http://www.itsonthenet.com/powerplay/


_Rock Roller Hockey_
Phone: 801-393-4883,801-394-2021
Email: Coac...@aol.com
WWW: http://www.xmission.com/~netrage/rock/rock.html


_South Windsor Arena_
585 John Fitch Blvd., South Windsor, CT 06074
Phone: 800-hockey1


_Sun Hockey_
Phone: 800-933-PUCK
Fax: 612-935-9142
WWW: http://www.planetsports.com/hockeyworld/SunHockey/


_Sure Grip Hockey_
Email: ly...@suregrip.com
WWW: http://www.suregrip.com/


_Winning Sports_
400 South Second Street, Hudson WI 54016
Phone: 800-279-8553
Fax: 715-386-3688
Email: win...@PlanetSports.com
WWW: http://planetsports.com/hockeyworld/WinningSports/



_________________________________________________________________



RACING SHOPS

_Built for Speed_:
(315) 492-6620

_SMR Sports_:
(708) 387-0283

_Competition Skates_
(205) 854-9617
c/o John Skelton
501 Springville Cr.
Birmingham AL 35215

_Trailways Skate Rental_
(813) 461-9736
c/o Tom Sehlhorst
611 Palm Bluff
Clearwater FL 33515

_Montrose Skate_
(713) 528-6102
c/o John McKay
1406 Stanford
Houston TX 77019

_Skate Escape_
(404) 892-1292
c/o Janice Phillips
1086 Piedmont Ave
Atlanta GA 30309


_________________________________________________________________



BEARING COMPANIES

(last changed 07-16-1996, 15:25) _Blackhole_
Phone: 800-327-9393


_Boca_
7040 N. Palmetto Park Rd. #2304, Boca Raton, Fl. 33433
Email: bea...@gate.net
WWW: http://www.bocabearings.com/


_Boss_
Phone: 714-890-7236


_Grizzly Gear_
Phone: 1-612-535-2035


_Powell Swiss_
Phone: 1-805-964-1330


_Terminator Bearings_
Email: bear...@tulsa.com
WWW: http://www.terminatorbearings.com


_X-treme Bearings_
Phone: 205-837-2735
Fax: 205-830-2086
Email: mba...@hiwaay.net
WWW: http://www.x-treme.com




WHEEL COMPANIES

(last changed 08-04-1996, 22:35) _Bolderblaze_
410 West Coast Highway, Suite K., Newport Beach, CA 92663
Phone: 714-722-9285
Fax: 714-722-8582
Email: Logan...@msn.com
WWW: http://gus.sdic.net/zgo/bolder/


_CORE Speed wheels_
2544 Lincoln Blvd., Suite #244 Venice, CA 90291
Phone: 800.987.4450, 310-330-2989
Fax: 310-330-2985
Email: core...@ix.netcom.com


_Cyko_
Phone: 1-800-438-2956


_FR Progressors_
Suite 4a, 700 Washington Street, New York, NY 10014
Phone: 1-212-691-1237
Email: wal...@frprogressors.com
WWW: http://www.frprogressors.com


_Hammer Wheels_
310 N. 21st St., Purcellville, VA 22132
Phone: 800-343-6591
WWW: http://www.hammerwheels.com


_Heavy Skate Works_
WWW: http://www.heavy.com


_Hyper_
15241 Transistor Lane, Huntington Beach, CA 92649
Phone: 714-373-3300
Fax: 713-373-2525
Email: hype...@aol.com
WWW: http://s2.com/inline/inline95/ads/hyper/hyper.html


_Kryptonics_
5660 Central Avenue, Boulder, CO 80301
Phone: 800 766 9146, 303 665 5353
Fax: 303 665 1318
Email: krypton...@kryptonics.com
WWW: http://www.kryptonics.com


_Meatz_
16 N. La Brea #139, Inglewood, CA 90302
Phone: 800-667-0587, 310-412-7424
Fax: 310-412-7426
Email: me...@well.com
WWW: http://www.meatz.com/


_Round & Round_
P.O. Box 1761, Nederland, CO 80466
Phone: 800-358-3833, 303-263-3299


_Schääts USA_
2201 SW 356 St. Suite B, Federal Way, WA 98023
Phone: 206-952-6330
Fax: 206-952-6307


_T.he W.heel F.ederation_
Phone: 1-800-488-7144


_Volcanix Wheels_
P.O. Box 2094, Gardena, CA 90247
Phone: 800-215-4376
Email: poly...@aol.com
WWW: http://www.volcanix.com/



_________________________________________________________________

Inline Skating Instructors (on the Net)

Regions:

* Alberta
* California
* Florida
* Massachusetts
* Maryland
* New Jersey
* New York
* Ontario
* Texas


_________________________________________________________________

Alberta

_Name:_ Alien In-Line
_Address:_ #304-328 Cedar Cr SW,Calgary,AlbertaCanada T3C 2Y8
_Email:_ psel...@canuck.com
_Teaching Since:_ for 4 years
_Type of Instruction:_ Beginner, Intermed, Speed & Fitness, Tours.

_References:_
Instructors are all NCCP (Nat'l Coaching Cert Program - Canada)
certified coaches in either speed skating or skiing (no
Canadian certification is available yet for in-line skating) -
all are at least level 1, some up to level 4


_Comments:_
Calgary's only in-line skate school - featuring world class and
Olympic athletes as instructors.


--------------------------------

_________________________________________________________________

California

_Name:_ Anna Stubbs
_Address:_ ,San Francisco,CA
_Phone:_ 415-221-4317
_Email:_ ki...@iat.com
_Type of Instruction:_ Beginner to advanced, Street skating and racing

_Comments:_
Specializing in private instruction. I have been skating on
inlines for over five years, focusing primarily on inline
racing. I am currently ranked in the top ten nationally
(National Points Challenge), and am the only woman to
participate in the Inline descent at the 1995 ESPN Extreme
Games. Whether you are just starting out, or want to refine
your skills, I can help you become a smoother, more complete,
and more efficent skater.


--------------------------------
_Name:_ David G. Miles Jr.
_Address:_ 777-5th Avenue #3,San Francisco,CA 94118
_Phone:_ 415-752-1967
_Fax:_ 415-SKATE97
_Email:_ CAbl...@ix.netcom.com
_Teaching Since:_ for 17 years
_Type of Instruction:_ David teaches all levels of skating, inline or
conventional, beginner, intermediate and advanced, speed, tricks,
slalom and dance youth and adult.

_References:_
Supervisor Terrance Hallinan, Supervisor Angela Alito,
Superrvisor Willie B. Kennedy, Joel Robinson, S.F. Supertindent
of Recreation, Don Smith, Exploring Executive, Boy Scouts of
America, Ike Elliot, Daly City Recreation and Parks Dept. Mike
Sullivan, San Francisco Police Dept.


_Comments:_
David Miles is a IISA certified instructor and teaches
regularly for the Learning Annex in San Francisco. Please refer
to our web page at: http://www.cora.org .

Background David Miles is known as the "Godfather of Skating"
of the San Francisco skating scene. He has skated from San
Francisco six (6) times in the "Skate Against Violence". David
is President of the California Outdoor Rollerskating
Association that has over 300 members and Coordinator of the
Golden Gate Park Skate Patrol. This group helps injured skaters
and other park users in Golden Gate Park on Sundays when the
park is closed to car traffic. David is also leader of the
Midnight Rollers "Friday Night Skate". This group averages
between 400 and 500 skaters that meet every Friday to skate a
12 mile route through San Francisco city streets at night. This
is the largest group of it's kind in the world.


--------------------------------
_Name:_ Kelly McCown
_Address:_ 1271 11th Avenue, #2,San Francisco,CA 94122-2202
_Phone:_ (415) 665-0336
_Email:_ sk8...@hooked.net
_Teaching Since:_ for 3 years
_Type of Instruction:_ All levels, beginning to advanced. Street
skating, hill mechanics, and speedskating technique. Private or group
lessons.

_Comments:_
1996 will be my third year racing nationally on a pro women's
speedskating team. I am an endurance junkie, and the 1995
winner of the Athens to Atlanta 85-mile ultramarathon. I am
also an immigration attorney (when I have time). I am one of
the founders of Roller Divas, a women's skating club, and teach
the club's beginning and intermediate skating clinics.


--------------------------------
_Name:_ Liz Miller
_Address:_ 32108 Alvarado Blvd. Suite 189,Union City,CAUSA 94587
_Phone:_ (510) 471-4102
_Email:_ get...@zoom.com
_Teaching Since:_ 3
_Certifications:_ IISA Level 1

_References:_
Specialty is beginner adults, but also building on students'
current recreational skills as much as time allows. Can teach
slalom skating as an expert skier (but not Level III-certified
for slalom.)


_Comments:_
1) Marci Adams, East Bay Regional Parks, Recreation Director,
(510) 635-0135, 2950 Peralta Oaks Court, Oakland, CA
94605-0381; 2) Clifford Pagan, Recreation Supervisor, (510)
471-6877, Union City Leisure Services Department, 31600
Alvarado Blvd., Union City, CA 94587; 3) Todd Trimble,
Recreation Director, City of Pleasanton, (510) 484-8291, 200
Old Bernal Avenue, Pleasanton, CA 94566.


--------------------------------

_________________________________________________________________

Florida

_Name:_ Caroline Ginn
_Address:_ ,St. Petersburg,FL
_Phone:_ 813-822-9028
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Cozette Painter
_Address:_ ,Tarpon Springs,FL
_Phone:_ 813-937-0028
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Darry Jackson
_Address:_ Bill Jackson's Shop for Adventure,Pinellas Park,FL
_Phone:_ 813-576-4169
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Gary Pilkington
_Address:_ ,Ocala,FL
_Phone:_ 904-365-9996
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Greg Hatch
_Address:_ ,St Pete Beach,FL
_Phone:_ 800-555-9469
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Jeff Camp
_Address:_ ,Ocala,FL
_Phone:_ 904-622-1122
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Jodie Pack
_Address:_ ,Clearwater,FL
_Phone:_ 813-796-8508
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Michael Schenker
_Address:_ ,Clearwater,FL
_Phone:_ 813-442-1065
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Michael Williams
_Address:_ ,Indialantic,FL
_Phone:_ 407-726-8548
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Rick Fason
_Address:_ ,Safety Harbor,FL
_Phone:_ 813-726-7743
_Certifications:_ IISA Certified
--------------------------------
_Name:_ Thomas Doehleman
_Address:_ ,Safety Harbor,FL
_Phone:_ (813)724-0398
_Certifications:_ IISA Certified
--------------------------------

_________________________________________________________________

Massachusetts

_Name:_ Lesli Woodruff
_Address:_ 120 W. Concord St. #3,Boston,MA 02118
_Phone:_ 617-424-7883
_Email:_ LRWoo...@aol.com
_Teaching Since:_ 2nd season
_Certifications:_ Basic Technique (i.e. Beginner/Intermediate rec
skating)

_References:_
Camp Rollerblade NY/Boston, 1994 Eric Flaim's Motion Sports
InLine Club of Boston (Clinics Director),
Boston/Cambridge/Brookline Center for Adult Ed Ski Market


_Comments:_
I have my own skate school: "Skate Boston", IISA Certified
Level 2, Do Clinics, privates, groups. Teach in Boston, but
will travel outside city for big enough clinics. Have access to
rental skates and demo van(s) InLine Club of Boston VP of
Events.


--------------------------------

_________________________________________________________________

Maryland

_Name:_ Joe Lembo
_Address:_ 5614 Lansing Drive,Camp Springs,MD 20748
_Phone:_ (301) 449-3086
_Email:_ jle...@wam.umd.edu
_Teaching Since:_ Ice Hockey, Powerstoking, Ice Skating - 6 yrs.,
Certified Associate member of ISIA - 1 yr. Rollerblading - 3 yrs.
_Type of Instruction:_ all levels, great with kids, specialize in
hockey, have contacts if interested in trick

_References:_
Maryland National Capital Park and Planning, Teresa Arias -
(301) 248-3124 Ice Skating Institute of America (ISIA), (708)
808-SKATE Terripan Inline Skating Club (TISC), John Gunn -
(301) 314-xxxx (Please call me first, be willing to give his
number, after getting his approval)


_Comments:_
Love working with kids, kids love working with me, I make
skating fun and interactive, play many self-developed skill
enhancing games; Speciality in hockey - ice hockey national
semi-finalist as youth; Points, Goals, and Assists leader for
Maryland Street & Roller Hockey Association last year, have
attended many skating schools including Ridley College in St.
Catherine's, Canada; Willing to work with groups and teams,
have experience with this! Willing to work in Washington Metro
Area., including parts of Southern Maryland.


--------------------------------

_________________________________________________________________

New Jersey

_Name:_ Timothy Mizerak
_Address:_ 145 Front Street,Dunellen,NJ 08812
_Email:_ mi...@cnj.digex.com
_Type of Instruction:_ Ready to teach beginner, intermediate and an
intro to figure skating

_Comments:_
Available in central and Northern New Jersey. IISA Certified
Level I (just this past April 1995) I have been hired to teach
skating at Rutgers University for their recreation classes.


--------------------------------

_________________________________________________________________

New York

_Name:_ Alan Gerber
_Address:_ ,New York,NY 10023
_Phone:_ 212-581-2994
_Email:_ ger...@panix.com
_Certifications:_ IISA Level 1 certification
_Type of Instruction:_ Beginner to intermediate; individuals and small
groups

_Comments:_
On the instructional staff at the Chelsea Piers Roller Rinks.
Will teach at Chelsea Piers, Central Park, or any other
convenient location.


--------------------------------

_________________________________________________________________

Ontario

_Name:_ Keith O. Gare
_Address:_ ,London,OntarioCanada
_Phone:_ (519) 679-0428
_Email:_ den...@julian.uwo.ca
_Teaching Since:_ for 1.5 years
_Certifications:_ IISA Level 2 certified

_Comments:_
Teach privately and with a skate school "The London Rollers".
Have my own skate club "The Forest City Rollers". Stress
SAFETY, FUN and LEARNING. ALL GEAR IS REQUIRED FOR LESSONS and
can be supplied if needed.


--------------------------------
_Name:_ Ross Halpin
_Address:_ 157A Fulton Avenue,Toronto,OntarioCanada M4K 1Y2
_Phone:_ 416.463.8524
_Fax:_ 416.463.7684
_Email:_ ro...@toronto.ark.com
_Teaching Since:_ for years
_Certifications:_ Level II IISA, Level III CIIA (Canadian Inline
Instructors Association)
_Type of Instruction:_ Beg/Inter/Adv. (children/adult), Fitness,
Aggressive, Ski Crosstraining. Privates, Groups, Corporation. Safety
Programming for Schools

_Comments:_
I am a certified Ski Instructor - Level III Canadian Ski
Instructors' Alliance (CSIA), Level II Canadian Ski Coaching
Federation (CSCF), Level III National Coaching Certification
Program (NCCP)in Sport Theory. I am also a Level II IISA
Instructor and have spent 3 years developing
(writting/testing/teaching/certifying) a curriculum under the
Canadian Inline Instructors Association (CIIA) banner. With its
three levels, I am a Level III Instructor/Examiner. During this
time, I worked as Technical Director/Head Instructor at a
Toronto inline school. I and two others have broken away to
form our own school, namely reaktiv inline. The information for
the Web Site is: http://toronto.ark.com/~reaktiv


--------------------------------

_________________________________________________________________

Texas

_Name:_ David
_Address:_ ,Dallas, Arlington, Irving, Ft. Worth ,TX
_Phone:_ (214) 247-3682
_Email:_ webe...@dallas.net
_Teaching Since:_ certified -1 year
_Certifications:_ IISA Certified
_Type of Instruction:_ beginner, intermediate

_Comments:_
I love to skate and to teach skating. I have skated ramps,
Stairs, play hockey, and trail skate for fittness. Skate hard,
fast, safe.


--------------------------------
_Name:_ Laura Winters
_Address:_ ,Richardson,TX
_Phone:_ 214-690-5220
_Email:_ llwi...@aol.com
_Certifications:_ IISA Certified Instructor. Level 1
_Type of Instruction:_ Level 1 & 2: beginners/intermediates (adults &
kids)

_References:_
Gordon Sanders, IISA Level 2/Examiner


_Comments:_
I am an IISA Certified Instructor. Level 1 consists of learning
the basics: balance, stride, stopping (heel, spin and grass
stops), turning (A-Frame and parallel turns). I mainly teach in
the North Dallas, Richardson, Plano area. Protective gear
required. If you don't own your own equipment, ask me about
rental information.


--------------------------------
_Name:_ Shooshie
_Address:_ ,Dallas,TX
_Phone:_ 214-324-2456
_Email:_ Shoo...@onramp.net
_Teaching Since:_ professionally - 20; skating - 1
_Certifications:_ IISA Certified

_Comments:_
Central, North, and East Dallas, also available in Phoenix and
Scottsdale, AZ


--------------------------------

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part11


_r.s.s.inline FAQ: Marketplace - Other Product Reviews_
_________________________________________________________________

[LINK] -->

MARKETPLACE - OTHER PRODUCT REVIEWS

(last changed Tuesday, 17-Sep-96 18:39:06 MDT)

Disclaimer: while these reviews include many facts and first-hand
experiences, much of the text here is necessarily opinion. Also
realize that the in-line market is changing rapidly, so prices and
specifications may be out of date. If you have a forms-capable web
browser, feel free to use the product review form for your
convenience. For you others, the plaintext review sheet is at the end
of this file.


_________________________________________________________________

Table of contents

_accessory reviews_
* J&J Titan Aluminum Rockers
* Jofa ISD Speed Puck
* Jofa Jofa Speed Puck
* Lazzy Legs arch and ankle tighteners
* Lazzy Legs Speed Demons hopup kit
* Lazzy Legs X-treme Pro hopup kit
* Lazzy Legs heel tightener
* Paragon bearing guards
* Rollerblade Power-strap
* Transpack Pro

_bearing reviews_
* Black Hole ABEC 3s
* Black Hole Rocks
* GMN ABEC-3, greased, tin-shielded
* Powell Swiss ABEC-1 "Bones"
* YAK ABEC-3
* boss abec 5

_grind plate reviews_
* CDS Detroit 3/8 slot style
* CDS Detroit Boot grind plates, Size: 4 plates, 1x3 inches
* CDS Detroit Street Line Frame Grind Plates
* CDS Detroit Woodies
* Commit LowBoy (wraparound)
* Lazzy Legs Steel Bridge Grind Plate

_hopup kit reviews_
* Cyko HurricanZ
* Hyper hopup kit
* Hyper hopup kit

_safety gear reviews_
* Bell Image helmet
* Boneless Boneless Knee (Street)
* Lazzy Legs Protector WRist guards
* Rector Fat Boy knees
* Rector Fat Boys
* Rollerblade Advanced wrist
* Rollerblade Standard Pads (knee/elbow/wrist)

_wheel reviews_
* Black Hole Sport
* Black Hole Sport
* Cyko HurricanZ 1993, 72mm, 82A-Flat 22
* FR Progressors 60mm/88A
* Hyper X-360 Cross Trainer
* Kryptonics 72mm/82A Rampage Full Radius, tri spoke core.
* Kryptonics 76mm Rampage 78A and 82A
* Kryptonics Mini Roxx (aggressive middle wheels)
* Kryptonics PowerPlay 72mm/82A w/ Krypto hockey radius, tri spoke
core
* Kryptonics VR Series 72mm/78A Narrow radius, tri spoke core.
* Kryptonics pebbels [older ones]
* Labeda Bad Boyz/Trick core 72mm/82A


_________________________________________________________________

accessory reviews

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ accessory

_Brand:_ J&J Titan

_Model:_ Aluminum Rockers

_Purchase Price:_ $20 for all 8 wheels (16 rockers)

_Store:_ some mail-order house (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 06/1994

_Used for how long:_ 2 months

_Pros:_
Aluminum rockers won't crack or warp like plastic ones will.
They may increase your speed a little, especially if you have
plastic ones that are already broken or warped because they
touch the bearing more preciley and won't rub up against it.

_Cons:_
$20 is a little expensive for 16 little pieces of aluminum but
they're pretty much the only place that I could find that makes
these things.

_Comments:_
I'm not sure what skates these things fit. I'm pretty sure
they're made for the Rollerblade line. I know Roces makes their
own aluminum rockers, specifically for their skates. I would
recommend consulting your dealer to make sure that they'll fit
on your skates.

_Rating:_ 9

Reviewer: Jim Kiraly (kir...@cse.utoleod.edu)

_Product Type:_ accessory

_Brand:_ Jofa

_Model:_ ISD Speed Puck

_Purchase Price:_ $10.95

_Store:_ Tam-O-Shanter (local store)

_Location/Phone:_ Sylvania,Ohio,

_Purchase Date:_ 08/1994

_Used for how long:_ Since August 7, 1994

_Pros:_
Puck comes installed with 12 (6 per side) nylon runners for
textured surfaces. Also includes 12 runners for smooth
surfaces. I have only tried the puck on parking lot type
surfaces, were it works really well. Feels like puck, handles
like a puck, etc..

_Cons:_
It doesn't get on the edge too often, but when it does, it
doesn't like to lay back down. The runners are not easy to
remove.

_Comments:_
The puck is wieghted around the edges and is spoked in the
center, it is completely made of rubber with the exception of
the runners. This is the puck used by the RHI.

_Rating:_ 9

Reviewer: Chris Fourgnaud (inl...@mountnet.com)

_Product Type:_ accessory

_Brand:_ Jofa

_Model:_ Jofa Speed Puck

_Purchase Price:_ $14.99 cdn

_Store:_ Sports Experts (local store)

_Location/Phone:_ Mic Mac Mall, Dartmouth, ???-????

_Purchase Date:_ 04/1996

_Used for how long:_ Approx 1 month

_Pros:_
It's the best puck on the market, but that doesn't mean too
much.

_Cons:_
The pucks cost a lot and when running an Inline Hockey league
the are always being lost or stolen. the pucks are not heavy
enough, runners constantly break and after the replacement
runners are gone it's very hard to find a place that sells them
the pucks have even cracked after hard shots. The puck won't
stay flat it is always rolling on its side.

_Comments:_
There needs to be some improvments, if anyone knows where to
get replacment runners let me know

_Rating:_ 5.1

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ accessory

_Brand:_ Lazzy Legs

_Model:_ arch and ankle tighteners

_Purchase Price:_ $20

_Store:_ Blades (local store)

_Location/Phone:_ Manhattan,

_Purchase Date:_ 06/1994

_Used for how long:_ 2 months

_Pros:_
They really give you a lot more support. Nice price. Durable.

_Cons:_

_Comments:_
These aren't really meant to tighten your boot more around your
foot. They're meant to hold your foot in place. The arch
tighteners can be used as a replacement for laces but I would
recommend leaving your laces on.

_Rating:_ 10

Reviewer: Jim Kiraly (kir...@cse.utoledo.edu)

_Product Type:_ accessory

_Brand:_ Lazzy Legs

_Model:_ Speed Demons hopup kit

_Purchase Price:_ $21

_Store:_ Play It Again Sports (local store)

_Location/Phone:_ ,

_Purchase Date:_ 05/1994

_Used for how long:_ 1-1/2 Months

_Pros:_
Comes with: 8 Aluminum threaded bearing spaces with hex locks.
16 Normal length small headed axel bolts 2 Brake wheel lenght
small headed axel bolts. 1 Hex tool

_Cons:_
Easy to strip the threaded spacers. The axel bolts would
actually loosen up and fall out during normal skating sessions.

_Comments:_
I was not impressed with these. All three sets that myself and
friends have owned have had the bolt loosening problem.

_Rating:_ 3

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ accessory

_Brand:_ Lazzy Legs

_Model:_ X-treme Pro hopup kit

_Purchase Price:_ $25.90 for 8 wheels

_Store:_ forgot (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 03/1994

_Used for how long:_ 5 months

_Pros:_
Most hop-up kits are made of aluminum. Steel is a lot more
durable.

_Cons:_
Steel is a little heavier than aluminum but the weight
difference isn't even noticable so I wouldn't worry about it.

_Comments:_
If you're looking to upgrade your skates, a hop-up kit is
probably the best place to start. You will certainly see a
speed increase, it will cost you a little over twenty bucks,
and it's a one-time cost. Once you install it, you won't have
to worry about it again. The Lazzy Legs X-treme Pro is the
Cadillac of hop-up kits.

_Rating:_ 10

Reviewer: Martin Sripan (ay...@yfn.ysu.edu)

_Product Type:_ accessory

_Brand:_ Lazzy Legs

_Model:_ heel tightener

_Purchase Price:_ $12.99

_Store:_ Performance Bicycle (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ /

_Used for how long:_ 1 month

_Pros:_
*Great for: reducing road vibration at high speeds *Reducing
heel lift due to weak instep area *Tightening boot fit
*Protecting side of boot from crash-not intended use though

_Cons:_
*Mainly useless on unflexible boots such as plastics

_Comments:_
It seems to be more intended for racing, to prevent heel lift,
but for some reason I look in Inline magazine issues, and many
extreme skaters are wearing it.

_Rating:_ 8

Reviewer: Tony Chen (adc...@garnet.acns.fsu.edu)

_Product Type:_ accessory

_Brand:_ Paragon

_Model:_ bearing guards

_Purchase Price:_ $4.99 for 20 guards

_Store:_ Paragon Products, Inc. (mail-order)

_Location/Phone:_ 690 Industrial Circle S., Shakopee, MN 55379, (612)
496-0091

_Purchase Date:_ 03/1994

_Used for how long:_ 1 month

_Pros:_
They DO keep the grit out and off of your bearings, and they're
plenty cheap.

_Cons:_
The guards do their job well, but the way the work requires
that they rub slightly against the wheel hub. This makes for
very, very slow skating, compared to w/out them.

_Comments:_
Description: these guards are small plastic discs a little
wider than your bearings. They have a hole in them to thread
your axles through them. What you do is put them over your
wheels at the bearings, on both sides, and thread the axles
through everything.

_Rating:_ 8, if you don't mind the large rolling friction caused. A
rating of 1 if you do! 8-)

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ accessory

_Brand:_ Rollerblade

_Model:_ Power-strap

_Purchase Price:_ $8

_Store:_ Herman's Sporting Goods (local store)

_Location/Phone:_ ,

_Purchase Date:_ 12/1993

_Used for how long:_ 8 months

_Pros:_
Give you a lot of support. Inexpensive. Very durable.

_Cons:_
They come with a little patch of velcro that you are supposed
to attach to the heel of your skate. When you put them on, a
piece of velcro on the heel strap sticks to that to help it
stay secure, under your heel. I just thought that was a nifty
idea so I mentioned it. I used a hot glue gun to keep that
little patch on. The Lazzy Legs heel straps look a little
thicker and they look like they might be a little more secure
so you might want to check those out before purchasing these.
But, on the other hand, for $8, you can't really go wrong.

_Comments:_

_Rating:_ 8

Reviewer: Ben (Be...@aol.com)

_Product Type:_ accessory

_Brand:_ Transpack

_Model:_ Pro

_Purchase Price:_ $60

_Store:_ Blades (local store)

_Location/Phone:_ ,

_Purchase Date:_ /

_Used for how long:_ a half dozen outings

_Pros:_
Durable Holds skates well Keeps water out, even in heavy rain
Secure design

_Cons:_
Needs more accessory pouches Top loading drawstring top can be
cumbersome for loading large things

_Comments:_

_Rating:_ 8.5

bearing reviews

Reviewer: Jim Stein (ste...@osu.edu)

_Product Type:_ bearing

_Brand:_ Black Hole

_Model:_ ABEC 3s

_Purchase Price:_ $26.00 for 16

_Store:_ Columbus Sports (local store)

_Location/Phone:_ ?, ?

_Purchase Date:_ 05/1996

_Used for how long:_ A month

_Pros:_
Good, durable ABEC 3s. Fast (of course.)

_Cons:_
Not as "serviceable" as they claim to be. It's almost
impossible to get the shields off! Noisy; need to be cleaned
very often (they shed grease very quickly.)

_Comments:_
Go buy some other brand. The extra price attached to these
"serviceable" bearings is wasted if you can't get the shields
off without damaging the casing!

_Rating:_ 6

Reviewer: Rob Remus (rwr...@rs6000.cmp.ilstu.edu)

_Product Type:_ bearing

_Brand:_ Black Hole

_Model:_ Rocks

_Purchase Price:_ $21.95 for 16

_Store:_ Wildcountry (local store)

_Location/Phone:_ Normal, IL,

_Purchase Date:_ 04/1994

_Used for how long:_ 3 months

_Pros:_
The bearings are faster (better) than the ones that came in my
Macro EQ's. That however is the only thing about them that is
better.

_Cons:_
The bearings get dirty VERY quickly. The bearings came lubed
with grease and within one day of skating they were dirty
enough to start making noise. I then replaced the grease with
oil, which made them even worse.

_Comments:_
Spend a little more money and get some good bearings.

_Rating:_ 5

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ bearing

_Brand:_ GMN

_Model:_ ABEC-3, greased, tin-shielded

_Purchase Price:_ $1.25/bearing

_Store:_ some mailorder place (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 06/1994

_Used for how long:_ 2 months

_Pros:_
Very inexpensive.

_Cons:_
Shields aren't removable so you have to pry them open to clean
them. They pretty much felt like my old ABEC-1s to me.

_Comments:_
I bought these because they were inexpensive but I'm sorry I
did. They didn't do much for me. If I could go back, I would
have probably spent a little extra money on a better set of
bearings. If you're looking for a cheap set of bearings to
replace a set of ABEC-1s and aren't really looking for a speed
improvement then these will suit you fine.

_Rating:_ 4

Reviewer: Tony Chen (adc...@garnet.acns.fsu.edu)

_Product Type:_ bearing

_Brand:_ Powell Swiss

_Model:_ ABEC-1 "Bones"

_Purchase Price:_ $2/bearing

_Store:_ Skates Off Haight (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 09/1991

_Used for how long:_ 3 years

_Pros:_
For a long time the Bones bearings were rumored to be ABEC-5
quality, but in the end the company said they were only
ABEC-1's. Doesn't matter. These bearings spin very well. They
are one-sided bearings, with only a plastic snap-cage to secure
the ball bearings. The ones I ordered were in sets of 8 and
came with a small plastic pouch of Bones speed cream.

In an extreme case of laziness and negligence, up until last
week I had only relubed 2 out of the 16 since I first bought
them 3 years ago. My main laziness stemmed from the fact that
they still spun like crazy, and still sounded clean. I have
since cleaned and relubed all of them, out of guilt 8-) but
they're all in amazing shape still.

In terms of maintanence, the Bones are very easy to clean and
handle because they have only two parts: the bearing and the
snap-cage. With most of the two-sided bearings (like Yaks,
TwinCams, etc.) you have to pry off the C-ring on each side and
you end up with 2 rings, 2 shields, and the bearing.

Also, when you take the snap-ring off, the balls inside aren't
constrained by a brace of any kind, so you can really clean out
the whole inside pretty well. This also means you can apply
your lube easily as well, since the balls are in full view.

Putting the snap-cage usually takes longer than putting a
C-ring and shield back on (on the other bearings), but it's
still pretty simple for the most part.

In any case, I have noticed ABEC-5 rated Bones for sale in some
mail-order places now. 1 or 5, I don't think you can go too
wrong with Bones bearings.

_Cons:_

_Comments:_
ABEC-1s are fast, but tend to have slightly more vibration
overall than some ABEC-5 bearings like Boss or TwinCam. If you
want ultra smooth rolling, you might have to go for the Bones
ABEC-5's or other ABEC-5's.

_Rating:_ 9.7-10

Reviewer: William Bradley (wbra...@thor.ece.uc.edu)

_Product Type:_ bearing

_Brand:_ YAK

_Model:_ ABEC-3

_Purchase Price:_ $2 per (normally) $1 per (on sale)

_Store:_ Inline USA (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ /

_Used for how long:_ 3 months

_Pros:_
o Removable Shields, Very nice bearing, no wobble

_Cons:_

+ Greased (you might be able to order oiled sets)
+ Having to listen to "DA YAKMAN" rant about them :-)

_Comments:_
Some people gripe that these aren't much better than ABEC-1s. I
noticed a marked difference, though.

_Rating:_ 7

Reviewer: chad renshaw (gu...@sprynet.com)

_Product Type:_ bearing

_Brand:_ boss

_Model:_ abec 5

_Purchase Price:_ $15.00

_Store:_ play it again (local store)

_Location/Phone:_ ?????, ???????

_Purchase Date:_ 06/1995

_Used for how long:_ 1-1/2 years

_Pros:_
spun better than my original bearings. I believe they were zz
bearings. Oiled.

_Cons:_
The boss abec 5 spun good I thought. I bought new Roces Street
skates which rule. They came equipted with abec 1 bearings.
Surprisingly and to my dissapointment they spun and were
smoother than my boss abec 5 .

_Comments:_
I'm buying Swiss Powell Bones now. I've read many articles on
these bearings including ones at this site. All say that they
kik. I can't wait for them to come in.

_Rating:_ 3.5

grind plate reviews

Reviewer: Ben (Be...@aol.com)

_Product Type:_ grind plate

_Brand:_ CDS Detroit

_Model:_ 3/8 slot style

_Purchase Price:_ $8

_Store:_ (local store)

_Location/Phone:_ ,

_Purchase Date:_ /

_Used for how long:_ long enough

_Pros:_
Good price, nice groove, hard (no need to make bigger groove
quickly), recessed flush area for axles , Easy installation,
good on curbs

_Cons:_
a bit thick less good on rails none I can really think of

_Comments:_

_Rating:_ 6.5 to 8

Reviewer: Martin Sripan (ay...@yfn.ysu.edu)

_Product Type:_ grind plate

_Brand:_ CDS Detroit

_Model:_ Boot grind plates, Size: 4 plates, 1x3 inches

_Purchase Price:_ $9.99 or so for a set of 4

_Store:_ Millennium In-Line (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ /

_Used for how long:_ 2 weeks

_Pros:_
Great if you can get it to work-helps with power stops, other
boot grinding maneuvers *Very versatile-use for other stuff

_Cons:_
Hard to attach velcro lanyards, for me at least.

_Comments:_
Works better on CLEAN surfaces; unscathed ones recommended. All
CDS products are probably good when used correctly, but I
didn't really need the boot plates-my boot was screwed from the
start. It works best on boots of the leather type probably.

_Rating:_ 3 if you don't apply correctly, 10 if you do

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ grind plate

_Brand:_ CDS Detroit

_Model:_ Street Line Frame Grind Plates

_Purchase Price:_ $5.99 for two.

_Store:_ some mailorder shop (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 06/1994

_Used for how long:_ 10 minutes

_Pros:_
They're made of plastic and plastic slides a lot better than
steel does because there's a lot less friction. Inexpensive.

_Cons:_
When I power-slide, I slide on the grind plate because it
sticks out so much and since it's so smooth, I keep on sliding.
Sometimes, I'll even do a split. When I cut sharp turns, I will
sometimes hit the grind plate on the ground and since it's so
smooth, my legs just slip out.

_Comments:_
They are a good idea. They'll protect your frame and they'll
slide better than any metal grind plate could ever dream. But I
just couldn't sacrifice maneuverability and power-slides for
it.

_Rating:_ 5

Reviewer: Matt Brock (val...@ktc.com)

_Product Type:_ grind plate

_Brand:_ CDS Detroit

_Model:_ Woodies

_Purchase Price:_ 10.00 + tax

_Store:_ team paradise (mail-order)

_Location/Phone:_ Huntington Beach, California,

_Purchase Date:_ 01/1996

_Used for how long:_ a couple weeks

_Pros:_
Slides real fast on rails which improves my balance, slides
nicely on curbs, although not as good as on rails

_Cons:_
There really isnt anything wrong with this grind plate

_Comments:_
CDS DETROIT IS THE BEST!!

_Rating:_ 1000000000000

Reviewer: Chris Wilson ()

_Product Type:_ grind plate

_Brand:_ Commit

_Model:_ LowBoy (wraparound)

_Purchase Price:_ $12

_Store:_ Sportfix (mail-order)

_Location/Phone:_ , don't remember

_Purchase Date:_ /

_Used for how long:_ 2 months

_Pros:_
Slicker than hell on rails.

_Cons:_
cant grind curbs.scrapes on ground when you turn.

_Comments:_
ONLY WORKS WITH 57mm WHEELS!!!!!!!!!

_Rating:_ 5

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ grind plate

_Brand:_ Lazzy Legs

_Model:_ Steel Bridge Grind Plate

_Purchase Price:_ $20

_Store:_ random mail-order house (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 06/1994

_Used for how long:_ 2 months

_Pros:_
It's made of steel so it's strong. It's thick so it will last a
while.

_Cons:_
The largest wheel size you will be able to fit on a skate with
a bridge grind plate is around 65mm.

_Comments:_
If you put a steel grind plate on your skate, it will slide
nicely on metal but grinding a curb is a little more difficult
because there's a lot of friction. There are many different
ways you can outfit your skate for grinding. With this plate,
you can skate with all small wheels or you can skate
anti-rocker. I still haven't discovered the perfect grinding
combo.

_Rating:_ 8

hopup kit reviews

Reviewer: Martin Sripan (ay...@yfn.ysu.edu)

_Product Type:_ hopup kit

_Brand:_ Cyko

_Model:_ HurricanZ

_Purchase Price:_ $20 for 8 wheels

_Store:_ Millennium In-line (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 08/1993

_Used for how long:_ 4 months; 1993, Discontinued

_Pros:_

+ Aluminum-speedy
+ Threaded
+ Hex lock
+ Comes with instructions-really no need

_Cons:_

+ No frame spacers
+ Aluminum-bad for extreme
+ Threads are lost after time
+ Bolts too big-huge profile
+ Bolts slide like CDS Detroit Grind Plates, but in this case,
it is a disadvantage-gives new meaning to power slide
+ Bolts get scuffed and flattened easily
+ No tools provided, though a Torx T25 helps, as I prefer
handled hex wrenches over hex keys
+ Brake bolts aren't big enough for my brake

_Comments:_
The guy who sold me these practically forced me into these over
the Blading Edge-should've bought the Hyper, it sounds/looks
good. It's better than plastic, but seems like any other,
Roces, Hyper, Mogema, Sure Grip, and other race frames are
better

_Rating:_ 3

Reviewer: William Bradley (wbra...@thor.ece.uc.edu)

_Product Type:_ hopup kit

_Brand:_ Hyper

_Model:_ hopup kit

_Purchase Price:_ $20

_Store:_ Local sports chain (local store)

_Location/Phone:_ ,

_Purchase Date:_ 05/1993

_Used for how long:_ 1 year +

_Pros:_
o Aluminum spacers *do* have internal hex hole for axle removal
o Includes two slightly longer axles to account for brake
mounting (Rollerblade, for example) o Each axle has a loctite
patch for safety o Kit also includes washers, if you need them

_Cons:_
o Aluminum spacers...supposedly these deform easier during
extreme skating (I wouldn't know) o Loctite...no star washers,
if that's your bag...

_Comments:_
I've had no problems with these

_Rating:_ 9

Reviewer: Jim Kiraly (kir...@cse.utoledo.edu)

_Product Type:_ hopup kit

_Brand:_ Hyper

_Model:_ hopup kit

_Purchase Price:_ $25

_Store:_ ISA (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 06/1994

_Used for how long:_ since June 1995

_Pros:_
- Comes with: 8 Red aluminun threaded spacers w/ hex lock. 16
Regular length, small headed axel bolts. 16 Washers 2 Brake
wheel length small headed axel bolts. 2 Hex tools.

_Cons:_
None to report.

_Comments:_
I would recommend these over the Lazzy Legs Speed Demons.

_Rating:_ 9

safety gear reviews

Reviewer: William Bradley (wbra...@thor.ece.uc.edu)

_Product Type:_ safety gear

_Brand:_ Bell

_Model:_ Image helmet

_Purchase Price:_ $80 (normally) $40 (on sale)

_Store:_ Bike Nashbar (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ /

_Used for how long:_ 2 months

_Pros:_
o Well-vented o Light (sub-8 oz.) o Easy to fit (adjustable
pads/straps) o Microshell (compromise between hardshell and
foam)

_Cons:_

_Comments:_

_Rating:_ 8

Reviewer: Ben (Be...@aol.com)

_Product Type:_ safety gear

_Brand:_ Boneless

_Model:_ Boneless Knee (Street)

_Purchase Price:_ $80

_Store:_ Blades (local store)

_Location/Phone:_ 73rd and second, too lazy to check

_Purchase Date:_ 05/1996

_Used for how long:_ weeks

_Pros:_
Big Great padding Comfortable for large size No wraparound
strap to tear below the plate Neoprene tube Replaceable plate

_Cons:_
Big Difficult to get on/off EXPEN$IVE!!!

_Comments:_

_Rating:_ 9 for aggressive, 7, everything else

Reviewer: FRanK (LiEW)

_Product Type:_ safety gear

_Brand:_ Lazzy Legs

_Model:_ Protector WRist guards

_Purchase Price:_ $40

_Store:_ SPit FIrE (local store)

_Location/Phone:_ ,

_Purchase Date:_ 01/1995

_Used for how long:_ 1 and a half years

_Pros:_
looks nice. with the leather, REALLY popular amongst agg.
sk8ers, not that restraining.... excellent choice.

_Cons:_
the plastic that protex you doesn't look it could stand up to a
big fall.. (it looks like a honeycomb)

_Comments:_

_Rating:_ 9

Reviewer: FranK Liew (hc...@pcnet.co.nz)

_Product Type:_ safety gear

_Brand:_ Rector

_Model:_ Fat Boy knees

_Purchase Price:_ 30-50 dollas

_Store:_ SPiTFiRe (local store)

_Location/Phone:_ ,

_Purchase Date:_ 02/1996

_Used for how long:_ approx. 4 months

_Pros:_
REAL nice padding..... i think its one inch thick, pretty
cheap, good alternative to the Boneless if ya can't afford
dem.... if u sk8 street, dese padz are one of da best... could
be good for ramps though (i don't sk8 pipes)

_Cons:_
could use a tube, more secure, may slip if ya wear it too
long.... also, if you sk8 in a tropics Country, say singapore,
watch out, baby coz dese thangs are BOILING hot after a coupla
hours....

_Comments:_
i reccomend dese to everybody..pros, grommies alike..

_Rating:_ 9

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ safety gear

_Brand:_ Rector

_Model:_ Fat Boys

_Purchase Price:_ $50

_Store:_ Skates Off Haight (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 04/1994

_Used for how long:_ 4 months

_Pros:_
Nice and big with about an inch of padding between the plate
and your knee. Your knees will survive any fall. Instead of a
tube, it has four thick straps. These straps work as well
(perhaps better) than any tube and you don't have to take off
your sneakers or skates to get them off. Cheaper than Boneless
Knee Pads. When you fall, the plates are made to slide across
the ground instead of sticking. I found that some pads like the
standard ones that Rollerblade, Inc. makes stick to the ground
when you fall so all that momentum you have forces you to roll
on the ground. With these pads, when you hit the ground, you
just slide on your knees for a few feet instead of rolling.
Does that make sense? Goes well with any wardrobe.

_Cons:_
You may find that your knees don't bend as well as they might
with a smaller knee pad but as far as "extreme" pads go, these
are the least cumbersome. You'll get used to them very quickly.

_Comments:_

_Rating:_ 10

Reviewer: BK (klig...@msn.com)

_Product Type:_ safety gear

_Brand:_ Rollerblade

_Model:_ Advanced wrist

_Purchase Price:_ $30

_Store:_ Gymnasium (NYC) (local store)

_Location/Phone:_ 42 st.,

_Purchase Date:_ /

_Used for how long:_ year

_Pros:_
Comfy Good idea Cool, good airflow

_Cons:_
Everything else Leather rips Beads wear down quickly Stitching
of poor quality Plastic reinforcement on top bends and
eventually breaks Not very protective

_Comments:_
These things are terrible. They rip, they smash they tear
apart, and they don't even protect your fingers. The ideal user
would be some kind of racer who only falls once or twice. They
are not for agressive skating or anything where you "expect" to
fall.

_Rating:_ 1 to 3 (depends on use)

Reviewer: William Bradley (wbra...@thor.ece.uc.edu)

_Product Type:_ safety gear

_Brand:_ Rollerblade

_Model:_ Standard Pads (knee/elbow/wrist)

_Purchase Price:_ $15-$25 per set

_Store:_ local shop (local store)

_Location/Phone:_ ,

_Purchase Date:_ 06/1994

_Used for how long:_ 1 year +

_Pros:_
o They work very well o Wrist guards have velcro pocket near
right thumb

_Cons:_
o They're somewhat bulky, sometimes get in the way o Velcro
pocket won't hold car key

_Comments:_

_Rating:_ 6

wheel reviews

Reviewer: Mark Berman ()

_Product Type:_ wheel

_Brand:_ Black Hole

_Model:_ Sport

_Purchase Price:_

_Store:_ Donehower's Sporting Goods (local store)

_Location/Phone:_ Lewisburg, PA,

_Purchase Date:_ 05/1995

_Used for how long:_ 3 months

_Pros:_
76 mm.,fast,hard,turns quickly.

_Cons:_
Plastic deforms after about a month causing bearings to
wobble.Ride crappy when worn down.

_Comments:_
These come with the new macros'. I don't know if they sell them
any other way.

_Rating:_ 9 for the first month then a 3.

Reviewer: D. James Stein (ste...@osu.edu)

_Product Type:_ wheel

_Brand:_ Black Hole

_Model:_ Sport

_Purchase Price:_ $24.95 for four wheels

_Store:_ Koenig's Sporting Goods (local store)

_Location/Phone:_ ?, ?

_Purchase Date:_ 06/1996

_Used for how long:_ A week

_Pros:_
Good speed, look sharp

_Cons:_
Wear quickly (even with 74A rating), scratch easily

_Comments:_
Good wheels, but don't buy 'em if you can't afford replacing
them in a couple of months.

_Rating:_ 7

Reviewer: Martin Sripan (ay...@yfn.ysu.edu)

_Product Type:_ wheel

_Brand:_ Cyko

_Model:_ HurricanZ 1993, 72mm, 82A-Flat 22

_Purchase Price:_ $20. for 8-$2.5 each (on MI-L sale), usually $40.
for 8

_Store:_ Millennium In-Line (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ /

_Used for how long:_ 2 days

_Pros:_
*Reinforced fan-blade core makes it fast and light-hard wheel-
nice wear, nice cooling *Black color is nice, no prints or
other obstructive stuff

_Cons:_
*Real bad on hard surfaces and on any extreme skates *Dull
wheel-no laminated gloss surface (tread, sidewall)

_Comments:_
In my opinion, it's just like any other wheel but it's fast and
cool.

_Rating:_ 5

Reviewer: Scott Weintraub (sco...@wam.umd.edu)

_Product Type:_ wheel

_Brand:_ FR Progressors

_Model:_ 60mm/88A

_Purchase Price:_ $7/wheel

_Store:_ forgot (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 07/1994

_Used for how long:_ 1 month

_Pros:_
Nice size/hardness for street skating. Solid core.

_Cons:_
Difficult to find. I expected them to be a little flatter on
the bottom (a la Hyper Midgets) but they were shaped a lot like
your generic wheel, only smaller.

_Comments:_
For 88A, they seem to be a little soft. It seems that Hyper's
version of an 88A wheel is harder.

_Rating:_ 8

Reviewer: Will Decker ()

_Product Type:_ wheel

_Brand:_ Hyper

_Model:_ X-360 Cross Trainer

_Purchase Price:_ $62.00 Full Set (8)

_Store:_ Oshman's (local store)

_Location/Phone:_ ?, ?

_Purchase Date:_ 12/1995

_Used for how long:_ 8 1/2 months

_Pros:_
Good wear. They have not shown much wear. Good wet traction (as
far as skate wheels go). Reasonable cost. Fairly low flex in
rough turns. Also has good bearing to hub fit.

_Cons:_

_Comments:_

_Rating:_ 9

Reviewer: Jim Kiraly (kir...@cse.utoledo.edu)

_Product Type:_ wheel

_Brand:_ Kryptonics

_Model:_ 72mm/82A Rampage Full Radius, tri spoke core.

_Purchase Price:_ $32 for 8

_Store:_ ISA (mail-order)

_Location/Phone:_ ,

_Purchase Date:_ 06/1994

_Used for how long:_ Since June 13, 1994

_Pros:_
Nice wide radius, nice for turning and such. Good even wear
(with proper rotation).

_Cons:_
Hubs do not have a nice tight fit around the bearings, which
causes the wheels to wobble from time to time.

_Comments:_
These are good wheels, I am not sure if the bearing problem
above is a problem with just my set or found with all Rampages.

_Rating:_ 8.5

Reviewer: Kenneth Wong (Art4...@leonis.nus.sg)

_Product Type:_ wheel

_Brand:_ Kryptonics

_Model:_ 76mm Rampage 78A and 82A

_Purchase Price:_ $35

_Store:_ Gallen Sports (local store)

_Location/Phone:_ ,

_Purchase Date:_ 11/1994

_Used for how long:_ 5 months

_Pros:_
Durable, Good for street

_Cons:_

_Comments:_
These are very durable wheels and are pretty good for
roadskating but don't try skitching on them coz they'd probably
melt. Good grip and are stable.

_Rating:_ 7

Reviewer: Ben (Be...@aol.com)

_Product Type:_ wheel

_Brand:_ Kryptonics

_Model:_ Mini Roxx (aggressive middle wheels)

_Purchase Price:_ $25/4 ($6? each)

_Store:_ Paragon (local store)

_Location/Phone:_ Broadway/ 18th,

_Purchase Date:_ /

_Used for how long:_

_Pros:_
Same as most other little wheels 52mm is a nice size for paring
to larger outer wheels like 62+ mm Good hardness Rounded, but
does not slip on grinds

_Cons:_
Same a other little wheels Rounded profile

_Comments:_
Unextroardanary

_Rating:_ 7

Reviewer: Jim Kiraly (kir...@cse.utoledo.edu)

_Product Type:_ wheel

_Brand:_ Kryptonics

_Model:_ PowerPlay 72mm/82A w/ Krypto hockey radius, tri spoke core

_Purchase Price:_ Came stock with skates (CCM RH555 Tacks)

_Store:_ (local store)

_Location/Phone:_ ,

_Purchase Date:_ 07/1994

_Used for how long:_ Since July 31, 1994

_Pros:_
Nice even wear, even with heavy usage. Great stability at high
speeds. Can really hold tight turns, I have yet to have them
slip out on me while turning.

_Cons:_

_Comments:_
My favorite wheel by far

_Rating:_ 9.5

Reviewer: Jim Kiraly (kir...@cse.utoledo.edu)

_Product Type:_ wheel

_Brand:_ Kryptonics

_Model:_ VR Series 72mm/78A Narrow radius, tri spoke core.

_Purchase Price:_ $40

_Store:_ Play it Again Sports (local store)

_Location/Phone:_ ,

_Purchase Date:_ 06/1994

_Used for how long:_ Since June 28, 1994

_Pros:_
Hub fits the bearings tightly.

_Cons:_
Not made for quick turns.

_Comments:_

_Rating:_ 8

Reviewer: da...@locke.ccil.org (da...@locke.ccil.org)

_Product Type:_ wheel

_Brand:_ Kryptonics

_Model:_ pebbels [older ones]

_Purchase Price:_ under $27.50

_Store:_ wheel federation (local store)

_Location/Phone:_ ,

_Purchase Date:_ /

_Used for how long:_ week or so

_Pros:_
hard, VERY VERY VERY hard. the r scale [in which they are
measured] is used for metals and stuff. i am pretty sure 50r is
about 120a or somehting close to that. out of all 47mm
wheels... pebbels are gods.

_Cons:_
well they could make em in smaller sizes, but i think 47mm is
ok.

_Comments:_
the best 47mm wheel out there.

_Rating:_ 10

Reviewer: Eric B. Thomas (eth...@dpc.com)

_Product Type:_ wheel

_Brand:_ Labeda

_Model:_ Bad Boyz/Trick core 72mm/82A

_Purchase Price:_

_Store:_ Play It Again Sports (local store)

_Location/Phone:_ ,

_Purchase Date:_ 10/1995

_Used for how long:_ 3 Months

_Pros:_
Smooth rolling, grabs street good, hubs fit bearings tight.

_Cons:_
I have to rotate & flip about every one hour of street usage.
Glass cuts wheel, & they seem to be wearing down fast.

_Comments:_
These are my third set of wheels & they feel smooth, but maybe
a bit too soft for me. I got a lot of little cuts from road
objects (like glass), but they still feel OK. I'm tired of
rotating & flipping them so often, but this might by my style
of blading, which is constantly slaloming around things & lines
on the road... Boots used: Roces LAX w/ ABEC 3 bearings.

_Rating:_ 7


_________________________________________________________________

In-line Product Review Sheet

Fill out each question as completely as possible. There's no rush to
turn these things in, so if you have to wait a couple days, couple
weeks, a month, whatever, then take your time. The goal here is to
provide as much information and informed opinions as possible. Thanks.


If you're reviewing a skate, please try and cover all features, like
wheels, bearings, braking systems, wheel-rockering systems, liners,
fasteners (laces, buckles, combo), chassis (the shell and runners),
plus any other neat/adjustable features.

1. Review by:
2. Product type: _(skate, safety gear, wheel, hopup kit, grind plate,
bearing, clothing, accessory*)_
3. Brandname:
4. Model name/number:
5. Purchase price:
6. From local store or mail order: _(name the store too, with the
address and phone number if it's a local store, otherwise just
name the mail-order shop)_
7. Date purchased:
8. How long have you used it:
9. Pros: _(list good features)_
10. Cons: _(list not-so-good features and possible improvements it
could use)_
11. Additional comments:
12. My personal rating: 1 to 10 _(10 being the best)_



*use accessories as the catch-all, when it's none of the other types

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part12


_r.s.s.inline FAQ: Wheels, Bearings and Hop-up Kits_
_________________________________________________________________

[LINK] -->

WHEELS, BEARINGS AND HOP-UP KITS

Table of Contents

* Inline Wheels
* The Bearing Maintenance File
* Hop Up Kits (axle upgrades)


_________________________________________________________________



Inline Wheels Files



(written May 17, 1992)
(last changed June 11, 1995)
_________________________________________________________________



Copyright notice
_________________________________________________________________

Technical Info

Most standard inline wheels are made mainly of polyurethane. Some
wheels are designed for sliding and use use a mix of different
durometers (like the RollerEdge wheels), or plastic rings (like the
BrakeWheel). Wheels are classified on diameter, hardness, rebound,
profile and core. Some are even classified by weight. However, most
often you will see only the diameter and hardness printed on the
wheels (e.g. 76mm 78A or 70mm 82A, etc.). The profile and core you can
tell by visual inspection.

Diameter

The diameter of the wheel means simply how tall the wheel is. The
usual diameters range from 43mm to 80mm. Most common sizes you'll come
across for recreational skating are 72 and 76mm. Skaters wanting speed
tend to use 80mm wheels, although 76mm's are used too, depending on
the skates and racing course and distance. Vert/ramp skaters use short
wheels with a high durometer to do rail slides. These range from 43 to
76mm, depending on the skating situation (vert, ramp, rails, etc.).

Generally, racing skates will fit up to 80mm wheels, high-end skates
up to 77mm (sometimes 80 now), and the rest of the models up to 72mm.
Although these are the designated max-sizes, skates can often take
slightly taller wheels than the official specifications. For instance,
in the old Bauer XF/3's, with the front and heel wheel spacers moved
in (for a shortened wheelbase), can use 76mm wheels for all four
positions. Extension modification (i.e., scraping down) of skates are
need for wheels much larger than the intended size.

In general, taller wheels will let you cruise faster but take longer
to spin up. Taller wheels also tend to be less manueverable than
shorter wheels. Shorter wheels are cheaper, but in general don't last
as long since they have less material to wear down overall, given the
same durometer. However since many of the small wheels are for stunts,
they all tend to be sold in higher durometers anyway (they slide
better), so they won't necessarily wear out that quickly.

70mm 72mm 76mm 80mm
Average speed____________________________________________Fast
Quick Turns______________________________________Slower Turns

Durometer (hardness)

Durometer is a relative hardness measure frequently used for rubber
and plastic products. There are several scales, with the "A" scale
(hence the 78A, etc.) used for wheels. The number is the rating from
0-100, with 0 being no resistance and 100 being very hard plastic.

Note: there is a Rockwell scale which is used for steel. Only one
wheel uses it now, Pebbles by Kryptonics, with a rating of 50R
Recreational wheels generally run from 74A to 82A. For outdoors, the
softer the wheel, the better the shock absorption. The trade-off is
that softer wheels wear out faster. Harder wheels, since they have
less drag, are preferred on indoor surfaces which are usually very
smooth (e.g. hockey).

Some skaters vary their wheel durometer depending on the temperature
outside. Cold weather will mean the ground is harder so soft wheels
are more suitable. In really warm weather the road might start
literally melting, in which case a high durometer setup would be more
preferrable.

74A 78A 82A 85A
Average Wear_________________________________Longest Wear
High Grip____________________________________Average Grip
High Rebound______________________________Average Rebound
Low Body Weight__________________________High Body Weight
Smooth Ride_____________________________________Hard Ride

Rebound

A higher rebound will provide more response on each stroke. The only
reference to a rebound scale in the inline industry now is the Bashore
Rebound, used by Roller Edge. Otherwise, rebound is referred to as
low, medium or high. The rebound labeling seems to have been phased
out as not many people seem to compare wheels based on this feature.

Profile

The profile of a wheel is defined by the cross-section of the wheel
where it meets the ground. All wheels are 24mm thick as an industry
standard, but the variation in a wheel's "footprint" is what provides
different functionality. The larger the footprint, the greater the
traction and stability. Many made-for-hockey wheels tend to have a
wide footprint for those sharp turns. Racing wheels on the other hand,
tend to be more tapered near the edges. More recently, FR Progressors
has developed an asymmetrically-profiled wheel, to help align on curbs
or rails.

Wide/fat Normal profile Narrow (race)
Best Cornering___________________________________Less Stable
Slow____________________________________________________Fast

Hubs/Cores

The hubs or cores (either term is okay) are very important to the
overall performance of the wheel. The core is everything other than
the wheel material. The core holds the bearings and connects to the
wheel material. Some wheels are open core (spokes showing), closed
core (spokes covered), or no cores (real small wheels don't really
need cores.) If the bearing core is slightly too large (as it often is
for shoddy wheels), it will not hold the bearings tightly enough. This
can allow the wheel to become "cocked" so that it rubs against the
frame. Only one wheel needs to be out of alignment to mess things up.

Misalignment is a serious problem, not only because it causes drag,
but because it heats up the wheel. This will soon cause it to seperate
from the hub and expand, and eventually destroy the wheel.

The first sign is that the wheels creak as you switch your weight on
the skate. If you remove the wheel from the frame, you can see an arc
clear of dirt and dust where the wheel was rubbing. If you notice
this, put your hands on your wheels after a long fast skate and see if
any of them are much warmer than the others. If so, they are probably
rubbing.

This can happen a lot easier on frames like the Mogema and the
Darkstar that have very close tolerences and the side of the frame is
close to the side of the wheel. I'm not sure if is as big as a problem
(or a problem at all) for recreational skates like the Aeroblade. The
creaking is bothersome in any event.

Closed Core Tri Spoke Core Racing Core
High Wheel Weight_________________________________Low Wheel Weight
Longest Wear__________________________________________Average Wear

Axle Kits

Another important aspect of your wheels is the axles. There are
several axle replacement/upgrade kits (such as the Hyper Hop-up Kit
and the Blading Edge Kit) designed to let your wheels roll much faster
than your stock axles will allow. These kits are usually made of
aluminium or steel. What they consist of is two axle bolts per wheel,
each screwing into the threaded spacer in the wheel (the part that is
sandwiched between the bearings). This prevents overtightening, which
is common with regular axle systems, and will allow your
wheels/bearings to spin freely. When putting your wheels back, make
sure the wheels are just snug enough so they don't move around.
Anything more just increases the friction on your bearings.

Maintenance

Wheels of any durometer will wear out, given enough mileage. There's
only so much polyurethane on your wheels, while there's thousands of
miles of asphalt out there. Much less wearage occurs for indoor
skating, however.

In general, your wheels are due for maintenance when your skates are
much slower and not rolling as smoothly as when new. The inside edges
will wear more quickly, which you will eventually notice:



For those of you without the benefit of a graphics-ready computer:

| | | |
inside | | outside inside \ | outside
edge | | edge edge \ | edge
\____/ \__/

new wheel worn wheel

There are two things you can do to get the most from your wheels:
rotate and flip. Rotating your wheels means to switch the positions of
the wheels. Different positions (like the heel or toe wheels) receive
varying amounts of wear. By rotating the wheels, you can even out the
wear on each wheel.

Flipping your wheels means to turn each wheel so that the worn edge
now faces the outside. This lets you wear down the other edge of the
wheels.

There are several patterns for wheel rotation. The one you use isn't
crucial, since there's no "magic" rotation formula that works for all
situations. The main point is to maintain an even wear on your wheels.
Often times you may find yourself swapping wheels at random until you
get a good wearage distribution on your skates.

Some common rotation patterns:

The front wheel is "1" and the back wheel is either "4" or "5".

For 3-wheel skates: 3->2, 2->1, 1->3

For 4-wheel skates: 42, 31 OR 4->3 3->2 2->1 1->4

For 5-wheel skates: 5->3, 4->2, 3->1, 2->5, 1->4
OR 5->3, 4->5, 3->2, 2->4

Whiled you're rotating and flipping your wheels, you might as well
wipe off your skates, rails, wheels and bearings with a damp cloth.
Some people wipe down their skates everytime they go out, even if they
don't do any rotation, but I recommend you do it at least everytime
you rotate your wheels. This keeps the amount of dirt on your skates
and wheels to a minimum, which helps keeps grit out of your bearings.

Rockering Your Skates

Having skates non-rockered means the axles and wheels are all at the
same height. This is the way the skates come when you buy then
(usually). What many skates allow you to do is to change the height of
some or all of the axles, to provide a different "blade" to skate on.
Rockered skates then, have the middle two wheels lower relative to the
front and heel wheels. This is accomplished by having oval spacers
with an offset axle-hole; each spacer can have an up or down position.

Racing skates are also adjustable, but only in the horizontal
direction, allowing for a longer or shorter wheelbase.

Although subject to some disagreement, many skaters find rockering
provides much more maneuverability due to the curved "blade" of the
wheels. Whether you rocker or not is really up to you. Many hockey
players prefer to have their skates rockered for sharper turns on the
court, while racers keep their blades flat for more stability at high
speeds (rockers at high speed will produce speed wobble). Artisitic
skaters may also prefer rockered, while extreme skaters may opt to
keep them flat.

Depending on your skates, there are various rockering configurations
possible. If your skates can adjust the height of only the middle two
wheels, you can have your skates flat or rockered:

Flat : ==frame==

1 2 3 4


Rockered: ==frame==
1 4
2 3

If your skates can adjust the height of all four wheels then you have
the positions of


short even rocker: ==frame== (wheels closer to boot, for more
control)
1 4
2 3

tall even rocker: ==frame== (taller, for sharper turns)

1 4
2 3

front-lift rocker: ==frame== (a little more stable than regular
rocker)
1
2 3 4

front-lift, : ==frame== (tilts skates forward)
rear-down, rocker 1
2 3
4

Wheels run from $3.00 to $10.00, depending on the 5 criteria referred
to at the beginning of this section. There are many inline wheel
manufacturers out there: Hyper, Kryptonics, FR Progressors, Senate,
Labeda, UFO, Cyko, Cozmo, Grizzly Gear, Kuzak, RollerEdge,
BrakerWheel, Ultimate, Bullzeye, Chaos, Core, Heavy, Kopp, Square,
Sims and probably several others.


_________________________________________________________________



The Bearing Maintenance File

(written May 2, 1992)
(last changed Jan 6, 1995)

_________________________________________________________________

Copyright notice
_________________________________________________________________

Contents:
* General Info
* Sealed or Shielded?
* Bearing ratings
* How to maintain your bearings
+ 1st method : If you don't mind taking off the seals.
+ 2nd method : If you don't want to pry off the seals.



General Info

Inline skates all use 608 bearings. The "608" means that the bearings
are from the 600 series, with a 8mm inner diameter (the width of the
hole, i.e., internal bore). The "6" appears to be for the 6mm
difference between the inner and outer radii (from the outside edge to
the edge of the hole).

608 bearings are also the standard size for skateboard bearings. Quad
skates use either type 608 (8mm internal bore) or type 627 (7mm
internal bore). The 608's for quads are the outdoor bearings. If your
bearings have letters following the "608" (like "S", "Z", or even "ZZ"
or "SS") it is the manufacturer's way of denoting sealed or perhaps
double shielded bearings. An "RS" label means shielded but that the
shields are removeable (i.e., serviceable bearings). To make sure what
they mean you should probably check with the manufacturer, since it
can vary from company to company.

A little cross-reference on part numbers for bearings, the 7MM ones
are for quality indoor skates, the 8MM ones are used for in-lines,
other indoor skates and skateboards.

Double Shielded:
NTN Fafnir MRC ND SKF HCH YW
7MM 627-ZZ 37KDD 37FF 77037 R7-2Z 627Z 60027
8MM 608-ZZ 38KDD 38FF 77038 R8-2Z

Double Sealed (neoprene rubber):
NTN Fafnir MRC ND SKF
7MM 627-LL 37PP 37ZZ 99037 R7-2RS
8MM 608-LL 38PP 38ZZ 99038 R8-2RS

Single shielded/sealed bearings usually delete one of the doubled
prefix/suffix characters. (Thanks go to George for the above chart).

Bearings for recreational use generally come grease filled. Some
bearings like GMNs are sold either greased or oiled (but usually
greased).

Some of the bearing manufacturers are: Black Hole, Boca, Boss, Cyko,
DF, Fafnir, FKD, Get Your Bearings, GMBH, GMN, Grizzly, Hyper,
Kryptonics (Russian), M&A Smith Stealth, NHBB, NMB, Powell Swiss
"Bones", RPM, Sonic, Terminator, Twincam and Yak. (The NMB's are
common as a stock ABEC-1 bearing in production skates, but they also
make ABEC-5's). There are many brands of bearings out on the market
now, although you should know that some are just bearings from the
same factory, just labeled differently. Some brands are NMB, Powell
Swiss (commonly called Bones bearings), GMN, Fafnirs, Black-Hole,
YAKs, Twin-cam, M&A Smith Stealth, (Super) Sonic, Terminator, Hyper
(Boss & RPM), FKD, NHBB, GMBH, DF, Grizzly.



Sealed or Shielded?

There are basically two types of bearings: shielded vs sealed. Very
likely you will have shielded bearings, which all stock skates come
with (as far as I know). Shields make it hard for dirt and grime to
get in, but they certainly aren't dust or watertight. For superior
protection against the elemnts, you need sealed bearings.

There are three kinds of shielded bearings: 1) two shields (metal), 2)
one metal shield & one pop-out cap for maintanence, 3) two pop-out
caps. If you have types 2 or 3, you'll have an easier time re-lubing
your bearings (see below)

Sealed bearings have a teflon or rubber lip seal that actually touches
the race and come packed with a fairly heavy grease. These are quite
impervious to dust or water. Rollerblade sells sealed bearings under
the name Max Trainers. You may find other brands as well. The
advantage is that they should last a long time without any maintenance
at all. The trade-off is that these bearings generally cost more and
you also encounter a much higher rolling resistance. Slower bearings
are not necessarily bad, since many people like the added resistance
for a better workout.



Bearing Ratings

Bearings are rated on the ABEC ("Annular Bearing Engineering Council",
_annular_ means circular) scale. The higher the ABEC number, the
greater the manufactured bearing precision. There are no required
materials to meet the ABEC specifications. The bearings simply have to
be made to a certain precision.

You may find cheaper skates with bearings not even rated on the ABEC
scale (primarily on "toy" in-lines and real low-end/kids skates).
These will often be labeled as semi-precision bearings.

In non-skating applications (like in industrial machinery) using
higher ABEC-rated bearings lets machines meet particular mechanical
tolerance or vibration levels, so they can operate at a high speed.
This is not because there is less rolling resistance, but rather
because the precision is better.

Whether ABEC-5 bearings will let you skate faster than ABEC-1 bearings
is still largely debatable. The higher precision may not make a
significant difference when you're at 10-20mph. Compare that with
typical machinery that may run at 10,000 rpm (~80 mph), where the
smallest change in precision can make a difference. Also, the higher
precision will eventually deteriorate down to ABEC-3 or 1 due to dust,
dirt and regular wear and tear. Cutting down wind-resistance and
improving your technique is probably much more effective at increasing
your skating speed.

However, all this is not to say that there is no reason to buy ABEC-3
or ABEC-5 bearings. Most ABEC-3 and 5 rated bearings are serviceable,
while ABEC-1's typically are not. So although you may not be buying
more speed, you will be getting more convenience in maintanence.

When to Clean and Re-lubricate Your Bearings

Exposure to dirt and water are the main reason that your bearings slow
down. Bad bearings will be ones which don't let your wheels spin for a
respectable amount of time (the definition of "respectable" depends on
on your type of bearings). If you hear or feel the vibrations of metal
rubbing on metal, chances are your bearings are in need of some
maintenance.

If some of the balls or bearing surfaces have become roughened,
there's basically nothing you can do. They won't get any better, but
they may last a long time anyway. You can always replace your bearings
a few at a time.

Take care of your bearings by cleaning and preping them as needed.
Assuming normal usage, they should last through several sets of
wheels, depending on how much skating you do.

Replacing Your Bearings

You probably want to replace some of your bearings if (1) any of them
them have somehow stopped spinning well, despite all the cleaning you
do or (2) you want to change to different types of bearings (racing or
sealed or whatever).

How to Take Care of Your Bearings

1st Method: Taking the shields off
1. Remove your wheels from the skates, and push the bearings out with
a spare bushing (the plastic/metal part that goes between the
bearings) or one of the several types of bearing tools available
on the market.

2. Now there's three types of situations you'll be in: a) If you have
shielded bearings with pop-out caps (Powell Swiss or Black Hole
brands), simply pry/pop out the plastic cap on each bearing.

b) If you have other serviceable bearings like Twin-cams or YAKs
you need to pop out the snap rings (C-rings) before you take off
the shields (use a small screwdriver to snap out the snap rings).

Shown below are a close-up of the C-ring and shield when you take
them out. Notice that the C-ring has a diagonal edge at either
end. There's really only one end that you can pry the ring out
with (i.e., the end with the pointed edge towards the inside). In
the picture, it would be the end at the top of the image. (Click
on either image to see an enlarged version).


c-ring image shield image

c) For non-serviceable bearings like NMBs, GMNs (Germans), or
sealed bearings, _FIRST_ make this decision: do you want to take
the shields off?

Some people tell you to never pry off a shield/seal, some say it's
okay. It's really up to you. In general, if you think you will be
doing a lot of maintainence on your bearings, you are much better
off taking the shields off. Whatever you do, the new lubrication
always helps.

NOTE: if you have sealed bearings you might not want to pop the
covers since you could ruin the seal integrity a little, which is
what you're paying extra for in the first place. Still, I have some
people say they put their bearings back together with no harm, so it
is possible. For more nitty-gritty on maintaining sealed bearings,
look at http://www.svi.org/~nates/bearing.html.


If you decide _no_ then skip down to the section marked 2nd
Method.

If you decide _yes_ then carefully puncture or pry off the shield
(or seal) on one side. Use a very small screwdriver, and pry along
the edge of the shield until you can get under it and pop it off.
If this is difficult, you can always push the screwdriver into the
shield (or tap it through (lightly!) with a hammer or heavier
tool). You don't need a whole lot of force since the shields
aren't all that thick or hard.

When removing the covers of entire sets of bearings at once, be
careful to only take off one cover per bearing. Otherwise you'll
be left with a shieldless/sealless bearing (which won't last long
against outdoor conditions).

Once you have the cover off, you should be able to see the ball
bearings inside, held in place by a retainer (click on the image
for a close-up).


[LINK]
You won't need the old metal covers anymore so you can throw them
away (assuming you're using non-serviceable bearings). They're no
good anymore anyway since they're probably bent and warped from
the removal.

In Bones bearings the cap is ALSO the brace, so you won't see a
brace, but just 7 bearings rolling around. Bones users should
obviously keep the plastic cap when reassembling their bearings.

NOTE: You don't want to take the ball bearings out since they
aren't meant to be removed and replaced. Besides, you'll scuff the
bearings and they won't roll well anymore.

3. Soak the bearings (c-rings and shields too if you've got
serviceable bearings) in Simple Green or some other biodegradeable
detergent. DON'T dilute with water! Use it straight from the
bottle. The detergents are very cheap and you don't need a whole
lot anyway (just enough to cover the bearings). If you want to
speed things up a little, put your cleaning container in a larger
container. Fill the area around the cleaning container with warm
or hot water but not enough to spill over into the cleaning
container.

The choice of cleaner/solvent isn't crucial so long as you can get
all the dirt and old grease cleaned out. However, I'd highly
suggest using one of the biodegradeable cleaners. They're cheaper,
safer, easy to dispose of (just let it go down the sink) and good
for other cleanup tasks as well.

If you do insist on using solvents, avoid low-flash point solvents
like gasoline, xylene, lacquer thinner, etc. which are dangerously
flammable. Also wear latex/chem lab gloves if possible when
handling these chemicals. Solvents are no fun to ingest or absorb
through your skin. An alternative is to use a pair of tongs or
tweezers to handle your bearings.

_Soaking the bearings_

How long you soak depends on how dirty and dried out your bearings
have gotten. Previously maintained bearings won't need to soak
very long. Bearings that have gone dry and have lots of grit in
them may need to soak overnight, or even several days.

If necessary use a brush or swirl your bearings around in your
container to make sure everything breaks loose. Small coffee cans,
peanut jars, or even those little black film canisters, all make
decent containers. Dave Woodall (woo...@adrs1.dseg.ti.com) has
his own way of swirling. He uses a battery operated drink mixer
and spins his bearings to cleanliness. He says it works really
fast, so if you like, try it out 8-)

You don't really need large amounts of cleaner or solvent. Just
enough to immerse your bearings. You also don't need to refill
with clean solvent with each bearing unless the solvent you were
using has gotten really dirty. The essential thing is that the
dirt and grease is broken up. Step 4 will remove most of the gunk.

WD-40 is generally not recommended as a cleaner since it leaves a
sticky, dust attracting film on the bearings. Note, however, that
some people swear by WD-40. It has become somewhat of a
heavily-debated topic, so experiment with it if you'd like.

Ultrasonic cleaners are ideal for cleaning bearings. If you have
access to one, you can clean your bearings en mass and avoid
getting your hands dirty.

4. Now rinse out your bearings with hot, soapy water to make sure you
clear out all the solvent. You now have some clean bearings. If
they're truly clean they ought to spin real fast.

5. Use a hair dryer to make sure that all traces of water are gone.

6. Now lubricate with your favorite lubricant. Lubricant choice
always seem to be somewhat preferential. Lots of people find one
lube that works for them and they just stick with it. It's hard to
try out multiple lubricants and get a thoroughly accurate
comparison throughout all types of skating conditions. 1) people
don't always have the extra money to do so, 2) to change lubes you
need to clean and relube (unless you have an extra set of
bearings) and 3) there's still no real good way to measure how
well a lube helps speed up or slow down your skating. A no-load
"finger-flick" spin test doesn't really cut it since it doesn't
entirely translate into the equivalent rolling resistance with
your weight on it.

Ideally, you'd have an indoor incline and/or flat surface,
multiple sets of identical bearings for each lube, and you'd see
which one gave you the most glide. Of course, this still doesn't
take into account how fast the lube dries or bleeds from the
bearings, or how easily it collects or repels dust/grime/water,
and on and on.

In the end, it doesn't make a huge difference unless you're into
serious racing. Your main choice will be choosing between oil,
cream/grease, telfon based lubes, (bicycle) wax/paraffin, and
whatever else is out there. Most people end up using grease or
oil. Oiled bearings have slightly less resistance, but need to be
maintained more often (as often as once a week). It is very
helpful to have a little hypodermic style oiler with a long needle
to let you put the oil right where you want it.

Grease works well because after a while most of it gets shoved out
of contact with the balls and only a little bit smears onto the
workings. However, newly greased bearings, will take a while to
expel any extra grease and move the rest out of the way.

For oils, although you can use stuff like sewing machine oil, or
5W-20 motor oil, household oils (3-in-one, etc) may gum up after a
while. In any case, most mail-order shops sell their own brand of
lubricant, as do many of the bearing manufacturers (e.g., Bones
and BlackHole). Although it's not proven these "special" formulas
are all that better, it's usually only a few bucks for a nice
little bottle of lube that should last you for a long time. Some
brands also come in a very handy hypodermic-style dispenser which
is perfect for putting a drop exactly where you want it.

NOTE: Use only a few drops of oil per bearing! Overlubing will not
only waste your lube, but you'll also make the bearings more
sticky and more prone to attracting dust and grime, which is
exactly what you don't want. Spin the bearing to spread the oil
around inside.

Let the bearings sit for an hour, and wipe them off.

7. Put one bearing back into the wheel, with the open face towards
the inside of the wheel. Insert the bushing and then put on the
second bearing (with the open face towards the inside again). It
is pretty hard for contaminants to get into the bearings from the
inside.

2nd Method: Keeping the shields on

First do Step 1 (from 1st Method).

If your bearings are permanently sealed (or you don't want to remove
the seals) you can still soak in solvent (see step 3) for several
hours or as long as you feel necessary. Enough solvent should soak
through to remove some of the grease.

Then you can lubricate the seams and/or press some in with your
fingers. Enough oil should seep through to lubricate your bearings
(see step 6).



_-Tony Chen (adc...@garnet.acns.fsu.edu)_


_________________________________________________________________



Hop-up Kits

Hop-up kits are simply upgrade kits that include frame spacers,
bearing spacers, and axels. They're made of aluminium or brass or some
other metal. Some incorporate threaded spacers too. The advantage in

using hop-up kits is that you can crank down real hard on your bolts


without compressing the spacers. The stock plastic spacers on most

skates will compress or even crack if you do this a lot. (more to come
in this section)

If you want, look at the hop-up kit reviews in section 3.4.


_________________________________________________________________

*This image is Copyrighted © 1994-1996 by Anthony D. Chen. Permission


is granted to use this logo in World Wide Web HTML files so long as
this copyright notice is included as either an HTML comment alongside
the invokation (IMG SRC or HREF or otherwise) of the logo, or in the
visible text.

The image may not be sold for profit, nor incorporated in commercial

documents or merchandise without prior written permission of the
copyright holder.

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part15




_r.s.s.inline FAQ: Where to Skate - Central North America_
_________________________________________________________________

WHERE TO SKATE - CENTRAL NORTH AMERICA



Last modified: Monday, September 16, 1996

Recent changes include:
* Added Chicago, IL skating Web link (7/2)
* Added Toronto, ON info from Orlando C. Fernando (8/16)

Table of Contents
* Illinois
* Indiana
* Iowa
* Michigan
* Minnesota
* Missouri
* Ohio
* Oklahoma
* Ontario
* Texas



Other sections of Where to Skate are:
* Western North America
+ California
* Northeastern North America
* Southeastern North America
* Abroad


_________________________________________________________________

General Notes



George Robbins' "Roller Skating Rink List" can be found at the URL:
http://www.netaxs.com/people/grr/Roller/.
_________________________________________________________________

Illinois
* Chicago
* Urbana/Champaign

Chicago



Web sites for Austria info:
* Skate! Chicago:
http://www.skaters.com/



From: RRAT...@vma.cc.nd.edu
Date: Unknown

There are cycle paths which go both north and south of the "loop" (the
downtown), along Lake Michigan. I have skated up north, starting at
Lincoln Park. I have also skated through the downtown both on
sidewalks and the streets, although, not during the business day (too
many cars). From downtown, a nice skate is up Clark Street north to
Wrigley Field. This is an interesting area, with used book/CD stores,
etc. You can judge distance based on address numbers: 800/mile. For
more information on where to skate (and not too), call the folks at
Londo Mondo (sorry, but I can not remember the address). Remember,
Chicago does have some really bad neighborhoods. For example, I would
not go west of Wells, in the area around Division Street.

From: tho...@tt726.NoSubdomain.NoDomain (Tom Depke)
Date: Tue, 19 Jul 1994 17:21:22 GMT

[...] is there anywhere REALLY cool to skate around Chicago? I've
read the FAQ about places to skate in Chicago but didn't see
anything really outstanding...is there?



It depends on the type of skating you are looking for. Is it speed,
tricks, or scenary? I like the lakefront down by the Shedd Aquarium
and Adler Planetarium for tricks and further north for scenary. The
problem is that it gets too crowded in peak hours and you can not get
a good workout in. So for that I go to Busse woods 53 & Golf. There is
a smooth bike path which goes for 8 miles and never seems to get too
crowded.

From: sny...@ssd.comm.mot.com (Fred Snyder)
Date: Mon, 12 Sep 1994 22:07:28 GMT

Having recently moved to Schaumburg, IL, I have discoverd the Busse
Woods bike path, in Rolling Meadows. Best accessible from Higgins just
east of 290, it's a 7.8 mile loop through surprisingly scenic terrain
with a good surface, not too crowded, frequent water pumps, everything
I could ask for except perhaps getting rid of the bicycles. It's no
Lake Shore Drive, but now that I've moved to the 'burbs, it will do
quite nicely. It still irks me that I have to _drive_ somewhere to
skate.

From: lang...@prairienet.org (Ana G. Langlois)
Date: 24 Oct 1994 01:40:16 GMT

First of all, Chicago is a huge metro area. So if you mean downtown
Chicago I'll tell you that one of the hottest places is along the lake
shore. My wife and I were there today. We had a little skate. It was a
lot of fun. It was real windy. Good work out. Thousands of people
enjoy walking, soccor. rugby, running, bike riding, softball, kite
flying, etc., etc., etc.

Park and skate. If you come in from the south, park around the Field
Museum or the Shedd Aquarium and skate north along the lake. From the
north parking may be easier. There are parks everywhere that have
parking. The multi use trail is good, but not perfect.

In the northwest burbs there is a vert park. I forgot the name. I
think it's in Hoffman Estates.

Pick up a copy of _Windy City Sports_ (free news magazine) you can get
it at any sport shop in the downtown area. On Clark Street, north of
the loop, there are a bunch of good stores: City Sweats, Londo Mondo,
Rainbo. They can tell you where the inline scene really is. Londo
Mondo (not on Clark actually) meets once or twice a week for fun
skates, outside. Winter will _probably_ put an end to that though.

I hope that helps a little. The thing is that if you are in the
northwest burbs (for example) you may not want to fight traffic to go
downtown. So call a shop in the area you plan to be (or are) in and
ask them for help. If they don't know anything try Londo Mondo, City
Sweats or Rainbo.

From: VIS...@minna.acc.iit.edu (W. Viseskosin)
Date: 20 Jul 1995 18:45:12 GMT

I skate at North Branch Trail 4-5 times a week (Mon, Wed, Fri, Sat &
Sun). The trail starts at Whealan Pool Forest Preserve (near the
intersection of Devon and Milwaukee) and ends at Chicago Botanic
Gardens. The trail distance is 20.1 miles. It's not overcrowded even
during the weekends (the park might be crowded, but the trail is
not.). I usually park my car at Linns Woods (about 1/2 mile east of
Dempster and Waukegan in Morton Grove) because it's near my house. I
like to skate from there to the Chicago Botanic Gardens.

Please check "Chicagoland Trail Guide by Elleen Kelly" out. It's a
great book about Trails in Chicagoland.

From: tjma...@prospero.er.anl.gov (Timothy Martin)
Date: 9 Jul 1995 00:19:00 GMT

SCRAP (Skateboards Cycles Rollerblades Action Park)

It is in Hoffman Estates, and is part of the Poplar Creek Sports
Center complex.

2350 Hassell Rd. (708)-884-0945

Take I-90 Exit at Barrington Road. Go south briefly, then turn left at
Hassell Road. Go only one block to a White Hen Pantry on left. Turn
left into a parking lot behind the White Hen that serves the sports
complex.

Monday closed.
Tuesday thru Friday : One session 5pm to 9pm.
Saturday: Two sessions 1 to 5pm and 5:30 to 9:30pm.
Sunday: Two sessions 11:30 to 3:30pm and 4 to 8pm.

Entrance fee is $5 per session. Some modest package deal also that I
forget about now. To use two of the big half-pipes you need to buy a
one year "membership" for $20 in addition to entrance fees.

A general mix of freestyle bikers, bladers, and boarders.

Urbana/Champaign



From: jms4...@uxa.cso.uiuc.edu (Clueless)
Date: Unknown

The [UIUC] Quad is a good place to do laps and play tag. (a group of
us play almost every night starting between 9 and 9:30)

The north quad has some nice stairs and a couple fountains to skate
over when the water is turned off. Assembly hall parking lot and most
of the other parking garages are good if you're looking for smooth
pavement. (The later are also nice if it's raining :) We've been
playing hockey in Assembly Hall parking lot, but there are problems
with the sewars swallowing the ball. If anyone knows a better place
where a lot of people can play (we had 13 tonight) hockey, please
tell.

There's a trail out near Windsor Road made for bikes and blades which
is a good place to go if you want to skate distance.

From: yes...@uiuc.edu (Eric Adams)
Date: 26 Apr 1995 03:54:35 GMT

There are several other places to skate around UIUC.
1. parking garages are always fun
2. the philo-Windsor trail/sidewalks
3. the Champaign city bike trails (to get to these, go south to St.
Mary's road, go west, across Neil, hop on the Boulware Trail, then
at the end, pick up Devonshire road for a ways until you come upon
a trail that goes up through a bunch of Condos, this trail then
crosses Mattis and continues west along a creek for quite a ways
and ends up at a big park.) I haven't gotten around to finding a
way around Devonshire (it is a little bumpy in sections).


_________________________________________________________________

Indiana

Indianapolis



From: Fred Pfenninger (pfen...@indy.net)
Date: Sun, 16 Apr 95 20:20:53 -0700

In Indianapolis there is a skatepark called TA (Travel Alternatives).
It is presently located at 25th and Arlington, but in October [1995]
it will be moving about a mile from there. They have an 8 foot pipe,
two 6's with a spine, a quarter pipe, and a wedge. In Oct. they will
be getting a lot more stuff. The cost to skate is $5.00 for the day.
Check it out!

From: GSch...@Indyvax.IUPUI.edu (Gary Schmitt)
Date: Unknown

Anyone wishing to skate during some bad winter weather is invited to
Indianapolis to skate at the RCA Dome. For those not familar with the
dome-type skating thing, it's done indoors on the concourse (the
circumferential hallway behind the stands). This makes for a smooth,
1/3 mile circuit, with just a few relatively mild expansion joints for
excitement.

There are usually a fair number of beginers within the group of rec
skaters and there are always speed skaters training as well. The Indy
Inliners have club night on Wednesdays, 5-9 p.m., whenever the Dome is
open on Wednesdays. This season, most Wednesdays are skate dates, but
call (317)824-DOME beforehand. There are also many other skating dates
on the schedule, so call to check.
_________________________________________________________________

Iowa
* Ames
* Iowa City

Ames



From: nw...@iastate.edu
Date: Thu, 25 May 1995 09:24:00 -0500

_Iowa State University, Ames, IA_
The campus area in Ames is really the only decent place to skate in
Ames. Head to the library and Durham center area and you'll probably
see a bunch of us hanging out jumping off of the ledges there. During
the summer the parking lots of the dorm parking lots are nice also.
Towers and Maple- Willow-Larch are mostly empty in the summer. A new
skateshop just opened on Lincoln Way in campus town(Skatesport) which
is nice to have.

Skate West in Des Moines has Inline Hockey leagues several nights a
week.

Iowa City



From: Jason D. Lycke (jdl...@wrdmail.er.usgs.gov)
Date: Tue, 18 Apr 1995 09:09:18 -0500

For those that are into recreational/distance/excercise skating, check
out City Park on the north end of town. It's got a lot of good paths
right next to the beautful (sort of) Iowa River. If you're into
street/extreme skating, the U of Iowa campus isn't a bad place to go.
Check out the IMU (Iowa Memorial Union) and the Pentacrest, and skate
through the ped mall once just for fun. Also, I've heard that some
people skate in front of Currier Residence Hall, but I've never been
there myself.
_________________________________________________________________

Michigan

Detroit



From: dia...@cbi.com (Dianne Marsh)
Date: Wed, 27 Apr 1994 13:29:31 GMT

It really depends on where you are going in Detroit. I recommend the
"metro" parks in the suburbs. If you are staying in the city, the
closest metro park will (probably) be Metro Beach, ... nice because
the path briefly goes along the water, but flat. One of my favorite
metro parks is Stony Creek (trail: 6 miles), which is about 30 miles
north of the city near Rochester/Utica. If you are visiting farther to
the west, Kensington Metro Park (near Milford/Brighton) has 8 miles of
very hilly paved trails. Both Stony and Kensington encircle small
lakes.

If you visit one of the metro parks, you can pick up a map (free)
which describes all of them. The map describes which parks have paved
trails and includes probably the best street map of the metro Detroit
area.

I believe that the entry fee is $3 daily or $15 for an annual pass.
The pass allows entry to any of the Huron-Clinton Metro Parks. I think
that Tuesday is "free" day.

For more information on the Huron-Clinton Metro Parks, call
1-313-227-2757. The phone book also lists 2 toll free numbers, but
they are under "Metropark Golf Courses". Try them if you like:
800-234-6534, 800-477-2757.

From: SNL...@aol.com (Larry Sylvain)
Date: Sun, 11 Feb 1996 14:10:33 -0500

I didn't see a mention of Indian Springs metropark in White Lake, MI
in any of the "where to go" listings. Indian Springs has an eight mile
ashphalt bike trail (approx. 4 feet wide) that runs through the woods
in a river headwaters area. It costs $3.00/day or $15.00/year for
entry, which includes entry to all other Detroit area metroparks. The
surface is smoth to moderate with very few wide cracks and is cleaned
regularly. There is an approximate 1/2 mile gradual hill at the course
start/end making for a nice, fast start and a good workout on the way
back. Be sure to wear sunglasses as the trail goes through the woods
and there are bugs! There is ample parking and, as a bonus, a way-cool
playground area near the parking area for the kids and a set of nature
trails about a half-mile away from the parking area (a nice, romantic
walk to cool down after blading). Indian Springs is my personal
favorite as a roller blade site.

From: THEC...@aol.com
Date: Sun, 20 Aug 1995 17:07:23 -0400

There are two indoor rinks for inline skating in the detroit metro
area. The first is U.S. Blades located in West Bloomfield (810)
661-4200 which has many times in which you can skate along with being
able to play hockey, get instructions on how to skate and your also
able to rent the rink for private functions. The second is Joe Dumars
field house located in Shelby Township (810) 731-3080. This facility
is used for inline hockey along with housing other sports such as
basketball and beach volleyball. Your able to rent the rink out for
hockey only.
_________________________________________________________________

Minnesota

Minneapolis



If you want a _really_ great place to rollerblade, Minneapolis opens
up the Metrodome to rollerbladers _only_ (I'm not sure about during
the summer, but they do this all winter). It's about a half-mile (I
think) circle of the smoothest concrete you've ever been on. There are
two separate levels, one for serious rollerbladers and one for "the
family." A "must-blade" if you're ever in the area.

From: phil dudero (pdu...@ATK.COM)
Date: Sun, 04 Jun 95 00:06:15 -0500

I [...] was shocked to see that the Metrodome was the only mention for
skating in Minnesota! This is really only true when the Twins aren't
playing baseball (assuming the activity they are engaged in presently
can be called that ;-). And as far as that goes it's around $5 dollars
for a skate (extra for equipment rental), 1/4-mile of smooth concourse
for one circuit (if I remember correctly), with two levels, the upper
level for faster skaters. Unless you've got someone to talk to I find
it boring after a short while, but what else are you going to do on a
cold winter night? Don't answer that!

When the snow isn't on the ground the place to skate in Minneapolis is
around the chain of lakes southwest of downtown. During the summer
Lake Calhoun

Tony Chen

unread,
Sep 20, 1996, 3:00:00 AM9/20/96
to

Posted-By: auto-faq 3.1.1.2
Archive-name: sports/skating/inline-faq/part17




_r.s.s.inline FAQ: Where to Skate - Southeastern North America_
_________________________________________________________________

WHERE TO SKATE - SOUTHEASTERN NORTH AMERICA



Last modified: Monday, 16-Sep-96 22:49:33 EDT

Recent changes include:
* Added Lynchburg, VA info from Elizabeth Fischer

Table of Contents
* Alabama
* Bahama Islands
* Washington, D.C.
* Florida
* Georgia
* Kentucky
* Louisiana
* Maryland
* North Carolina
* South Carolina
* Tennessee
* Virginia





Other sections of Where to Skate are:
* Western North America
+ California

* Central North America
* Northeastern North America


* Abroad


_________________________________________________________________

General Notes



George Robbins' "Roller Skating Rink List" can be found at the URL:
http://www.netaxs.com/people/grr/Roller/.
_________________________________________________________________

Alabama



From: Linda Kerr (ke...@Forestry.Auburn.EDU)
Date: Fri, 25 Aug 95 15:49:15 -0700

Our group of 8-10 skaters go to what we call "Fort God," which is
actually a huge Baptist church (Lakeview Baptist) on the corner of
Glenn & E. University in Auburn, Alabama. Very big parking lot, some
hills, no cars, smooth pavement, no gravel, lights for nighttime
skating.
_________________________________________________________________

Bahama Islands



From: SCHR...@PROCESS.COM (Jeff Schreiber)
Date: 9 Nov 1994 17:50:48 -0000

I was in the Bahamas in August for my honeymoon. The skateability of
Nassau _greatly_ depends on where you are thinking of. If you are
talking about Downtown, I wouldn't recommend it (too crowded).
Otherwise the streets might be ok (but they drive like morons! _and
I'm from Massachusetts_ :). Sidewalks are out, they are mostly all
broken up, they disappear randomly, and overall, wouldn't be any fun.

If you're thinking about the Carnival's Crystal Palace, or The
Radisson Cable Beach (or anything on Cable Beach), I would say bring
them. I did see one guy out on skates at the hotel. There are some
nice cement courtyards and paths in the larger hotels on Cable Beach.

As far as your comment about "as if that mattered" referring to the
police. I realize you said that as a joke, but I just wanted to say
that you should be careful. The police are pretty nice down there,
although some are corrupt. I would _not_ suggest pissing them off
though. The Bahamas are nice, but if you go Downtown, I want you to
try to picture what one of the jail cells are like. It _is_ a foreign
country, and I for one don't know all their laws, so I wasn't planning
on pushing the police if they warned me. Don't forget what happened to
that kid in Singapore!

From: dcoo...@aol.com (DCooper2)
Date: 5 Mar 1995 21:02:10 -0500

Freeport, Bahamas. Stay at the Princess Hotel. Roads are nearly empty.
Beach is three miles away. Cars on left side of road a bit of an
adjustment.
_________________________________________________________________

Washington, D.C.



See also the Arlington, VA, section for info about some trails near
DC.

From: r...@skatecity.com (Robert Schmunk)
Date: 23 May 1995

Here are some comments and observations about skating DC, based on two
trips there in the last seven months:

Freedom Plaza (Pennsylvania Ave. at 14th St. NW) long held a
reputation as a great place to grind and stair bash, plus practice
various maneuvers on the wide-open flat marble. Not that the quality
of the skating there has changed, but the legality of it has. Sometime
in the spring of 1995, skating of all types was banned from Freedom
Plaza, apparently as a result of the defacement of the plaza by wheel
and brake marks _plus_ physical damage like chipped steps resulting
from grinding skateboards and skates. Skaters can bitch all they want
about the ban, but they do need to realize that marking up a prominent
city landmark across the street from city govt offices will draw a
harsh reaction in any town.

I have heard that some/much of the skating activity has shifted from
Freedom Plaza down Penn. Ave to Indiana Plaza, but the one time I went
by there, I didn't see any skaters and wasn't that impressed by the
plaza. I've been also told by one DC skater that the ban at Freedom
Plaza isn't too strongly enforced, but any truth to that could change
in an instant on a politician's whim.

Elsewhere in central DC, one place that seemed favored by the skaters
is the statue by the reflecting pool at the base of Capitol Hill. The
primary reason for this is that it is flanked by flights of about 10
steps, spaced just right for some fun stair bashing. I've done this in
broad daylight on a Sunday afternoon, which leads me to suspect that
authorities aren't too worried about such behavior. But again, that
could change if they think the monument is being damaged or if a
tourist should get hurt by a careless skater.

About Capitol Hill itself, I've heard that it's a violation of umpteen
different federal regulations to skate there, so watch out! That being
said, I'll note that the parking lot on the east side of the Capitol
is gigantic and often totally empty when Congress is not in session.

In West Potomac Park, Ohio Dr., the road leading from the Lincoln
Memorial down to the Jefferson Memorial, has apparently been recently
(sometime in 1994?) re-surfaced and makes for some smooth blading.
I've no idea about the condition of the road south of the Jefferson
Memorial.

On May 20, 1995, the section of Pennsylvania Ave. adjacent to the
White House was blocked off to auto traffic for security reasons.
Skaters immediately realized the potential of this action and were out
skating this inadvertent outdoor roller rink that very day. (I was
there the following day :-) However, while this street is wide, it is
also wide open to the sun, and I expect that the asphalt could be too
soft to skate during the summer. Also, word is that the street will be
ripped up and turned into a plaza of some sort, so the open skating
there may not last long.

Many of the other streets and avenues near the Mall are in extremely
good shape and make for some fun group skating, especially at night
when traffic has thinned out. This is especially true near federal
office buildings that are not near tourist landmarks. The flip side of
this is that although street skating is apparently not illegal in DC,
the cops will give you some grief if they think you're obstructing
traffic or if they're just bored. On one night skate of about 75
people, we had a cop turn on his patrol car PA system and yell, "Get
off the street," but another cop we passed 10 minutes later didn't
even react to our presence.

Just as cops don't quite seem to know how to react to group skates
passing by them on the streets of DC, the general populace also seems
to have not caught up with the 1990s. Lots of cars will honk excitedly
when they see a cluster of skaters go by.

From: geo...@eng.umd.edu (George B. Clark)
Date: Unknown

na...@eng.umd.edu (Naruhisa Takashima) writes:

For those in the D.C. area, I have skated on Rock Creek Park which
is real nice path for joggers and slow bicyclist, but I'm not so
sure if it's suited for Bladers. The path is narrow, damp in many
places, and ocassionally very steep which makes it very difficult
for speed control, which in turn leads to bail out or wipe out.



Most parts of Rock Creek Park's bike path are OK to skate, except for
one real steep place that even bike riders have trouble with.

Since the path goes through the woods, keep in mind that wet leaves on
the pavement are very slippery to skate over.

It's also fun to leave the bike path, and skate about the nice
neighbor streets adjacent to it.

From: sim...@eeel.nist.gov (Eric Simmon)
Date: Wed, 20 Jul 1994 17:33:51 GMT

_Rock Creek Park:_
from behind the Lincoln Memorial to Rt 28 in MD. Parts of the path is
decent pavement, parts suck. Be prepared to share the path with bikers
joggers and walkers. Sections of Beach Dr. are closed on the weekend,
which provides a good surface to skate on (but each section isn't very
long)

_Capitol Crescent Trail:_
Take K street west underneath the Whitehearst freeway, where the road
ends, the path begins. This is a new path with wide, smooth pavement.
It is only about 3.5 miles long right now, but will eventually go all
the way to Bethesda.

_Downtown:_
Plenty of good skate terrain downtown, just watch out for traffic and
bad surfaces (the mall has pavement with pebbles in it which is _very_
nasty, but doable). The asphalt can be hazardous in the summer because
it gets so hot your wheels just sink in.

From: tem...@usuhsb.usuhs.mil (Mitch Temoche)
Date: 17 Oct 1994 17:14:15 GMT

I went skating behind the Capitol once late at night. Lots of wide
open space, it was great and security didn't say anything. Liberty
Plaza on Pennsylvania Ave. is pretty nice and we also went up and down
F Street NW. Rock Creek Park has an excellent bike-trail for skating.
Recently I skated the parking lots on Research Blvd in Gaithersburg on
Sunday when it was empty. There's a lake in Germantown, MD on Waring
Station road that I've skated. I haven't tried Mt. Vernon bike trail
in VA yet but, I hear it's very crowded. You also might try Avenel in
Potomac MD there are some bike trails. Coastal highway in north of
Ocean City MD is very good too.
_________________________________________________________________

Florida
* Miami/Lauderdale
* Orlando
* Tampa/St. Petersburg
* Tallahassee

Miami/Lauderdale



From: thd...@isye.gatech.edu (Mark Tabladillo)
Date: 9 Sep 1994 17:43:23 GMT

Ft. Lauderdale has lots of flat places to skate. The path by the ocean
has just been changed to interlaced red brick, but it's still good for
skating.

South Miami, in my opinion, was a better place to skate. Theres a flat
concrete boardwalk that runs along the beach, though it's further from
the water than the Ft. Lauderdale boardwalk. At the southmost end of
the beach, there are paint marks for cones. Also, at the center of the
beach, there is building which has a square courtyard for skating,
which has a cone in the center, and music coming from large speakers.

Across the street, there are a number of small cafes, restaurants and
bars. I saw better and more skaters in South Miami compared with Ft.
Lauderdale. Both are great, and there are many places in South Florida
for skating (BTW, roller hockey is big, and there are plans to build a
large rink in Broward County).

From: car...@aol.com (CarlHK)
Date: 14 Sep 1994 18:29:05 -0400

Here in Miami Beach we've got a great boardwalk next to the beach
(Ocean Drive between 5th and 15th streets) where on any given day
you're bound to find tons of skaters. During the weekend we set up a
slalom course near 5th and Ocean (the dots are painted on the ground)
and skate at insane speeds. Sometimes a ramp is also out near 5th and
Ocean. Monday nights about 100 skaters get together around 7:30 pm at
Penrod's bar on 1st street and Ocean Drive for a skate around the Art
Deco district. We end up at Penrod's afterwards where the bar gives us
2 for 1 drinks. Good way to work out, meet folks and get buzzed. Nice,
eh? Tuesday and Thursday nights about 150 skaters get together with
the New River Rollers in Ft. Lauderdale for a 12 mile skate around the
intracoastal waterway and the canals up there. Beautiful scenery and
fantastic work out. Those skates end at the New River Saloon, for,
yep, more drinks.

Orlando



From: James Waldron (wal...@interport.net)
Date: 27 Apr 1995 17:13:00 GMT

There is an excellent skatepark just north of Orlando in Altamonte
Springs called "Badlands." Nice ramps and an excellent street course.

From: lines...@aol.com (Lineskater)
Date: 27 Jun 1995 10:48:39 -0400

I just came back from a family vacation in Orlando. Before I went I
consulted the Orlando Sentinel about trails, and I just have to share
info about the West Orange Trail west of Winter Green (nw of Orlando).
First of all, I thought it was a road because it's 10 feet wide! The
surface is incredible - like a newly paved parking lot! Right now it's
only 4.5 miles long, but plans are to extend it this year. It's the
best trail skating I've ever done. Hope this helps somebody else who
wants to combine the $ vacations in Orlando with skating.

From: ci...@news.gate.net (Chad Irby)
Date: 27 Jun 1995 18:12:40 -0400

Yeah- the West Orange is a great place to skate. (It's west of Winter
_Garden_, though) When they finish it, it's supposed to be about 30
miles (I've heard 27 to 33), and I want to try and organize a race
when they finish it.

The other good skate here is the Cady Trail, next to Fashion Square
Mall. 3.5 miles each way, with benches at regular intervals and water
fountains every half mile (and in the Florida summer, that's a Good
Thing).

From: na...@rice.edu (Alex Chapman)
Date: Wed, 29 Nov 1995 17:59:11 -0600

Hmm. Orlando. Home saccharinney sweet home. As far as I know, there is
no longer any truly good public place to skate legally. That's sort of
what happens when you have a city with vast suburban sprawl and the
lovely teen curfew writing city government decides that it not only
doesn't want late-night young hooligans, it doesn't wan young
hooligans on wheels downtown either. Since Orlando is essentially a
tourist town, they decided that it would be bad for business for the
tourists to see scary young people doing dangerous things on sidewalks
and little tiny stair sets downtown.

I suggest you skate downtown until you get busted, they'll just tell
you to go home. Or, you could become politically active... this is the
result of a mute young populace in a city that wants it both ways--to
be glittery and big but be cozy and safe and suburban. As a result,
they do stupid things that effectively ruin the city for anyone
willing to use it. Oh well. Maybe their new extra-tall courthouse will
fix things by virtue of its being big and expensive and shiny.
Regardless, downtown skating is illegal.

A shame; the Anderson Street bridge downtown really was a good cheap
thrill, best pseudohill in town... up to the top of the bridge, wait
until all the lights are good and the traffic's light, skate down and
wait for the shimmy in your skates to start, give it a little brake...
at the bottom veer right into the OUC parking lot, watch out for the
grates and speed bumps. My friends really didn't like it when I did
that. Remember, I didn't tell you that, when all your skin is spread
across the road or your skull dashed on the pavement a few feet
downhill from the speedbumps.

Most of what's left is unskatable car-congested stripmall terrain and
wide dull flat suburbia. Sorry.

University of Central Florida is okay, especially for beginners.
Better skaters will find it a bit flat, though they may find a little
entertainment in the benches and steps... it's sorta interesting in
that the whole campus is very skateable... and there's some truly
excellent blacktop for evening games of tag or just gliding about some
night.

Tampa/St. Petersburg



Web sites with Tampa/St. Pete info:
* Eric Santman's "Tampa Bay Area Recreation Skating Guide":
http://ourworld.compuserve.com/homepages/Eric_Santman/



From: Eric Santman (72530...@CompuServe.COM)
Date: 21 Jul 1995 16:10:15 GMT

I am proud to announce that on July 20th, 1995, the City Council of
Tampa 'decriminalized' the act of skating on all City streets of a
speed 30 mph or less. This is effective immediately.

This does not affect:
* Current ban on downtown sidewalks during business hours
* City Streets faster than 30 mph
* County or State maintained streets, even in the City limits



In addition, a Task Force has been named to review:
* 30 MPH streets that may be inappropriate for skating (too
commercial)
* Faster-than-30 mph streets that may be appropriate for skating
* Relationships with other non-auto road users, like cyclists
* Ways of promoting positive skate vibes throughout the Community



From: mie...@sunset.eng.usf.edu (Bradley Mierau (CH))
Date: 26 Feb 1995 16:43:59 GMT

TotallyJon (total...@aol.com) wrote:

Tampa- Bayshore Blvd. Right on the water. Nice spot.
Friday and Saturday nights Ybor city meet 9pm Platt St and Bayshore.
If you want to skate St. Pete Monday and Thursday at the Thunderdome
parking lot 8pm-10pm.
Ft. Desoto Park probably the nicest spot around. 4 1/2 miles in a
county park. The best around.
The Pinellas trail 47 miles and nice too.



Another good place is Flatwoods County Park, 5 miles west of I75 on
Fletcher in Tampa. About 13 miles of trail... no motor vehicles...
almost no stop signs. _Very_ secluded, maby not a good place for
female skaters by themselves.

Tallahassee





From: dc...@mailer.cc.fsu.edu (Daryl S. Cain)

Date: Unknown

A great place to skate! Its got it all--hills, flatlands, gentle
slopes, the works. Tallahassee is the capital of Florida and home to
both Florida State University and Florida Agricultural and Mechanical
University. Skating is a relatively new sport in Tallahassee. There
are few places to buy skates and none where decent accessories or
compentent help is consistently available. The law is tolerant (play
it cool) but some private properly owners can be pains.

The best place for flatlanders is the St. Marks Trail south of
Tallahassee. This is a paved railroad right of way with the trailhead
located on Highway 363 (Woodville Highway) just south of State Road
319 (Capital Circle SE). Plenty of parking is available, however,
space does get sparce on the weekends.

The trail streches 16 miles from Tallahassee to St. Marks--a small
fishing village famed for its manatee population. The pavement is high
quality with few rough spots. Traffic is light on the weekdays, heavy
on the weekends. Most walkers quit after 1-2 miles and skaters after
2-3 miles. From there on down its smooth sailing except for the
bikers. The people are generally polite and accidents are rare. There
is a combination bike/skate shop at the north end of the trail. They
rent skates (Roces) and bikes for reasonable rates there.

In the spring the trail is beautiful. Flowers and shrubs are in bloom
and the lucky can generally find a good blackberry bush to pick.
However, snakes also like sun themselves on the warm trail so beware
the occassional rattler when you wander. Florida is a hot place so
pack plenty of water.

Speedsters will find that Tallahassee is quite hilly. Most hills are
located on the East or North sides of town. Pavement is of very high
quality, it's asphalt with a fine gravel base, but beware the
ocassional patch of shell rock. By far the best hill (in my
experience) is located on Morningside Drive just north of Highway 27
off Richview Drive on the east side. My wife has clocked my friend and
I at 45 mph near the bottom. The hill is about 1500 yards long,
straight, with a baby hill going up the other side to slow down on.

For more radical skating work, the place to go is the Florida State
University campus. There is no telling how the campus cops would react
to skaters but mountain bikers generally get away with murder. The
place is a cornicupia of stairs, ramps, hills, sidewalks, speedbumps
and parking lots. The campus is huge and almost every type of terrain
except for mountain switchbacks are available. The only cavat is that
when classes let out during the semester the place becomes packed with
pedestrians. The best times to skate there are at night, on weekends,
and during the summer semester.

For the freestylist, parking lots are in great abundance in
Tallahassee. Most places are cool, but the rent-a-cops at the
Governers Square Mall are a pain in the ass. Its a real pity to, the
parking lot covers about ten acres and was just repaved about five
months ago with the smoothest asphalt you've ever laid eyes on. A
suitable alternative is the Kroger Center, located on the east side of
town between Highway 27 and Capital Circle.

Pick-up hockey games are held at Skate Inn East, 2563 Capital Circle
N.E. on Sunday - 7:00 pm and Wednesday - 9:30 pm. For more information
contact Steve Bohl at (904)656-2056. You gotta have your own stuff.

Be forewarned that there are few experienced skaters in Tallahassee.
For that reason there are no real "skater" hangouts. Most people have
a steady skate partner that they skate with but organized affiliations
haven't developed to any real extent yet.

There are many outdoor events in Tallahassee, such as bike-a-thons and
the like, and they're just now warming up to the idea of skaters
joining their ranks. Hopefully skaters will get off on the right foot
here and become a legitimate part of the exercise/fitness community.
So if your in town and maybe want to skate a few miles, drop me a
line.
_________________________________________________________________

Georgia

Atlanta



From: g...@terminus.gatech.edu (toM o. genesE)
Date: Unknown

Well, I'm not quite sure what your looking for in a place to skate,
but if you are ever in Atlanta (well, it is on the East coast after
all) be sure to go to Piedmont Park. The park itself is home to quite
a few skaters, and no one minds their presence. Directly across the
street from the park is Skate Escape, the rec/speed skate shop
mentioned in the rec.skate FAQ.

Every Monday evening, there is an introductory skate through the
midtown area, starting at a shopping center near the park. Even though
the trip is labeled as introductory, when the skaters (80+) gather in
the parking lot, you can meet advanced skaters and pick up some tips,
see some tricks, etc. If you are into speedskating, Skate Escape has a
distance skate every Wednesday night.

There is also a local skate club, the Atlanta Peachtree Road Rollers.
These are the people who put on the Monday night skate, as well as
provide introductory skate lessons.

I can get more info on the club and these events if there is some
interest.

From rbu...@owlnet.rice.edu
Date: Unknown

_Great_ skating city; lots of hills and really scenic. Piedmont Park
is really popular with beginners and pros alike. Go to the entrance
near Piedmont and 12th street. There's a skate shop on that corner
(Skate Escape). They can tell you whatever you want about other
skating events in the city, regular weekly skates with the Peachtree
Rollers, etc.

Cops don't seem to mind skaters as long as you stay out of everyone's
way (i.e. use common sense).

The Georgia Tech Campus is another great place, especially for
freestyle types. Lots of stairs (the ones by the student center are
ideal for stair-riding) and ramps, great hills, and a few parking
decks to boot.
_________________________________________________________________

Kentucky

Louisville



From: steve...@aol.com (SteveS1222)
Date: 7 Sep 1994 12:07:06 -0400

Seneca Park has a walking path that is rather narrow with many
walkers. Cherokee Park has a 2.3 mile loop-road that is now one-way
with the inside lane reserved for bikes, walkers, and skaters. It's
much better than Seneca.

Another area I've started skating around is along the river downtown.
There is a walk path, narrow but little traffic because it's new, that
runs for a mile or two along the river. There is a free parking lot at
the end of 10th street and the path is right there. If you go east
past the construction, you can skate around the Belle of Louisville
dock also.

I've heard that a number of people skate on the Belvadere. It is the
open area above the construction near the Belle. I've not skated there
yet though, so I can't give you an opinion.
_________________________________________________________________

Louisiana
* New Orleans
* Covington

New Orleans



From: BEL...@lsuvm.sncc.lsu.edu
Date: Fri, 27 Jan 95 13:12:33 CST

The most popular place to skate is Audobon Park (next to Audobon Zoo)
in uptown New Orleans. It is a circular track about a mile long with
bladers, bikers, and joggers. There used to be 3-hour street skates
around the city on Thursday nights and Saturday afternoons. I am not
sure if they are still going on. Call Park SK8 (504-891-7055) in N.O.
for more info.I would not try skating around the French Quarter - it's
wall to wall people and cars and the roads are atrocious.

From: br...@larry.cc.emory.edu (Brian B. Reid)
Date: 31 Jan 1995 06:30:19 GMT

I took a trip to N.O. a few months ago and skated the Quarter a bit.
If you go at a resonable hour (pre 1 p.m.) and keep your eyes open,
it'll be an interesting skate... nice scenery, anyway...

From: SCH...@aol.com
Date: Wed, 18 Oct 1995 16:53:14 -0400

Lafreniere Park in Metairie is the best place to skate in the metro
New Orleans area. There is a lagoon to skate around . It also has
bridges and stairs and rails. You can skate up until 10 P.M. The city
of New Orleans is trying to make it illegal to skate in the French
Quarter and on the public streets. Audubon Park is one long circle no
challenge for an aggressive skater.

Covington



From: kdl...@ucs.usl.edu (Landry Kimberly D)
Date: 12 Apr 1995 00:31:48 GMT

I recently skated the Tammany Trace which is a rails-to-trails (i.e.
linear park) which extends 8.3 miles from Abita Springs to Covington.
It will eventually be a 30 mile park. We skated the trail then skated
to lunch at a cafe and then skated through the abita springs beer
brewery on a tour. Abita Springs is a beautiful town with very
attractive features around the trail. It was a great day and fully
recommend it.
_________________________________________________________________

Maryland

Baltimore



From: ha...@aplcenmp.apl.jhu.edu (Marty Hall)
Date: Unknown
1. Loch Raven Reservoir. A 1.5 mile or so stretch of smooth pavement
on the east side is closed to traffic weekends from 10AM to 5PM.
Go up Dulaney Valley Rd. along west and north sides of reservoir.
Stay along the reservoir (ie bear right) when the main road bears
left at the restaurant. The next road is where skating starts.
Moderately crowded with walkers, skaters, and bicyclers on nice
days, esp after lunch. But shaded and cool.
2. Baltimore Street Skater's Club. They meet 1st and 3rd Thursday's
of the month in the Light Rail parking lot on Deereco Rd. This
runs parallel to I83 between I83 and York Rd, halfway between
Timonium and Padonia Rds. They meet 7:30-9:30 with clinics (from
raw beginners to moderately advanced) going from 8:00-9:00. They
recommend "joining" for about 20 bucks, but it is not required.
Joining also gets you a T-shirt. They also have hockey some other
night. Call Hal Ashman at Baltimore Boardsailing (666-WIND) for
more info. 60+ people on a typical night. If you can crossover
backwards, do a few jumps, and do basic slaloms around cones
(backwards, 1-foot, crossing legs forwards), then you are already
as good as all but their best instructors, but can still mess
around with the better skaters. The more advanced groups generally
take off into the surrounding industrial parks.
Cancelled if there is a home Orioles game that night.
3. Patapsco State Park. Just S of I195 off of Rt 1, near the UMBC
campus. It costs to get in, but skaters can park in the
residential area outside the park (go past the entrance up the
hill), and skate in for free. It is about 1 mile into the main
park, then there is a 2 mile stretch of river to skate along,
ending in a hanging bridge over the river. One side of the river
is a road (no cars allowed most of the way), the other is a bike
path.
4. Camden Yards stadium. Huge parking lots and smooth sidewalks south
of stadium and around it. Obviously avoid game days. Guards will
not let you skate between the warehouses (inside the large gates)
but will let you skate elsewhere. On a weekday or early AM
weekend, you can also skate over to the Inner Harbor for a nice
cruise.
5. Baltimore Annapolis Trail. Nice smooth bike trail running from
Glen Burnie to Annapolis. I've never ridden it all the way into
Annapolis, and suspect that to ride into downtown Annapolis would
be hard, since I _think_ you would have to cross one major bridge
after the trail ends. Anybody know?


_________________________________________________________________

North Carolina
* Raleigh/Durham/Chapel Hill
* Nag's Head

Raleigh/Durham/Chapel Hill



From: mco...@bnr.ca (Matt Cohen)
Date: 24 Apr 1995 17:10:49 GMT

The best place to skate in the area is probably the Research Triangle
Park - miles of trails and wide open, smooth roads with little hills
or traffic. NC State and UNC have some good roads. Downtown Raleigh is
good and well lit. The Triangle Skating Club [(919) 460-0964] has four
organized group skates each week, Saturday at 10am, Sunday at 1pm, and
Tue/Thu eves at 6pm, leaving from the park & ride next to the
governor's inn, exit 280 off I40.

From: b...@hyperfine.caltech.edu (Brian C. Broom)
Date: Wed, 26 Apr 1995 11:19:56 -1812

I used to skate a trail at shelly lake (raleigh around Millbrook rd ?)
2-3 Mi path. One direction has really steep downhill, and some other
paths were steep, so scout ahead. I usually went counterclockwise
around the lake.

I also heard people going to the Lake/Park around Athens Drive (again
in Raleigh)

Nag's Head



From: Rodney Patterson (Rodney.P...@NorfolkVA.ATTGIS.COM)
Date: Wed, 23 Aug 1995 22:10:00 GMT

A concrete path has been built on Beach Road in South Nags Head (app
MP 16?). If you are not familiar with South Nags Head, take 158
business South until you see signs for the split to Manteo or
Hatteras. 158 goes to Manteo, you have to veer left to get on NC 12
like you are headed to Hatteras, but you want to take the left at the
KFC and then right down Beach Road. Parallel to this sidewalk (?)
there are side streets on which I used to blade. The combination is
enough to get some distance.
_________________________________________________________________

South Carolina
* Columbia
* Charleston
* Hilton Head Island
* Clemson

Columbia



From: David Doughty (dou...@ena-east.ericsson.se)
Date: Fri, 08 Sep 95 14:08:56 -0400

Riverfront Park, down beside the old Correctional Facility along just
below the confluence of the rivers into the Congaree: Smooth paved
trail about 1/2 mile long, not great for distance, but nice to stretch
the legs. I've skated from there along the sidewalks to the campus of
"The USC" (The University of South Carolina), which has some good
parking lots, stairs, etc, but you'd better be ready to deal with some
serious hills if you want to go far!

DO NOT try to skate INSIDE Dutch Square Mall!!

Charleston



From: David Doughty (dou...@ena-east.ericsson.se)
Date: Fri, 08 Sep 95 14:08:56 -0400

Downtown/Battery/College of Charleston - it's flat and it's paved,
what else do you need to know?!? Just watch out for cobblestone
streets and horse-droppings!

Hilton Head Island



From: David Doughty (dou...@ena-east.ericsson.se)
Date: Fri, 08 Sep 95 14:08:56 -0400

Sea Pines Plantation has paved bike trails everywhere! Some are in bad
repair, there is sand/water/etc on some, but most are great for
skating. Narrow, but no hills - do watch for tourists on rent-a-bikes.
There are also trails popping up around the rest of the Island, too.
There is one along 278 from the Mall south, and then east to the
Holiday Inn and on to Sea Pines. And if you forget your blades, you
can rent some at fairly reasonable prices at...well it used to be the
awesome Beach Factory, but Mr. Wingo changed the name, but it's
located 270 degrees around the traffic circle from Holiday Inn, as you
go back toward 278. It's on the right, just past the Exxon, next to
Sharkey's Pizza, across the streed from a miniature golf place.
Warning! DO NOT try to skate on the golf-cart paths. They do NOT
appreciate it!

Clemson



From: David Doughty (dou...@ena-east.ericsson.se)
Date: Fri, 08 Sep 95 14:08:56 -0400

Some great skating!! Plenty of sidewalks, parking lots, stairs,
benches, etc. There is nothing else there but the University, so
they're used to "pedestrian" traffic, and have plenty of paved areas
with little/no cars. Just lots of people for about 15 minutes every
hour :-) Plenty of hills, but if you navigate carefully you can catch
the easier slopes.

The sidewalks above (and on top of!) Strom Thurmond Institute
(underground building behind Cooper library) are nice, flat, often
people meet here before heading out to the rest of campus. Small
slopes coming down from Library and east-campus side are good for
beginners.

Loading dock behind Olin hall (West campus between Brackett and Riggs)
has great ramp for getting air (5 - 8 feet above ground level!), just
make sure you launch at an angle or you'll hit the wall!

The hill going up to East Beach and the Crew sheds above the Rubgy
fields is some intense downhill with more than enough flat run-out at
the bottom. Just leave one person at the bottom of the hill to stop
cars! (which are few and far between, unless they're starting crew
practice).

The absolute best day I've ever had skating was the day we simply
rolled right in the main gate to Death Valley, Clemson's stadium!
Tearing around on the smooth asphalt under the stands, down The Hill
(steep grass with asphalt at the top to start from, and a big dip
half-way down: serious air, land with a tumble, head-over-heels down
the rest of the slope! Excellent, and no road-rash, just grass
stains!!), and down the grass slope between the West and South stands
(Jump the wall and the sidewalk!)

Inside: Skateland in Anderson allows blades with no-mark brakes (or no
brakes!) Skateland in Easley is a great rink, but I haven't been there
since I got my blades, so I don't know about that.
_________________________________________________________________

Tennessee
* Nashville
* Oak Ridge

Nashville



Web sites with Nashville info:
* Nashville Net Inline Skating Page: