Ap3g1 K9w8 Tar 124 23c Ja2 27l

[Louann Tandy]

In this example I am using 3500 series AP & therefore I have downloaded ap3g1-k9w7-tar.152-4.JA1.tar & ap3g1-rcvk9w8-tar.152-4.JA1.tar files onto my TFTP server. Now you need to rename these in order to load it to AP when it is resetting using mode button. Below shows the how it should be renamed. Since it expecting same default filename you have to make sure correct file renames depend on you are doing LAP-> AAP or AAP->LAP conversion process.


If a AP already being used, that can be converted in the past eitherway. Only way to verify is power up the AP & see show version. If image comewith k9w7 that indicate an autonomous image. if it is k9w8 then it is lightweight.



Ap3g1 K9w8 Tar 124 23c Ja2 27l

Download Zip https://stewwatlaken1983.blogspot.com/?nw=2wS5wM






8705_t1_0_4_3c (1).tar 20.83Mb December 12 2014 at 06:53 8705_t1_0_4_3c.tar 20.83Mb December 12 2014 at 06:55 8790_k2_0_7_52 (1).tar 16.02Mb December 12 2014 at 06:53 8790_k2_0_7_52.tar 16.02Mb December 12 2014 at 06:55 air-ct2500-k9-7-6-120-0.aes 139.61Mb December 12 2014 at 06:56 AIR-CT5500-K9-7-6-120-0.aes 139.61Mb December 12 2014 at 06:56 AIR-WLCM-K9-7-0-235-0-ER.aes 3.15Mb November 28 2014 at 01:28 AIR-WLCM-K9-7-0-235-0.aes 75.58Mb November 28 2014 at 01:29 AIR-WLCM-K9-7-0-240-0-ER.aes 3.15Mb November 28 2014 at 01:27 AIR-WLCM-K9-7-0-240-0.aes 76.45Mb November 28 2014 at 01:28 AIR-WLCM-K9-7-0-250-0-ER.aes 3.15Mb December 13 2014 at 20:58 AIR-WLCM-K9-7-0-250-0.aes 76.54Mb December 13 2014 at 20:56 ap3g1-k9w7-tar.152-2.JA.tar 9.34Mb December 12 2014 at 06:56 ap3g1-k9w7-tar.152-2.JB.tar 11.69Mb December 12 2014 at 06:55 ap3g1-k9w8-tar.152-2.JA.tar 10.81Mb December 12 2014 at 06:55 ap3g1-rcvk9w8-tar.152-2.JA.tar 7.24Mb December 12 2014 at 06:55 asa922-8-k8.bin 29.09Mb December 12 2014 at 06:53 c1140-k9w7-tar.152-2.JB.tar 9.87Mb December 12 2014 at 06:55 c1200-k9w7-tar.123-8.JEE.tar 4.87Mb December 12 2014 at 06:56 c1240-k9w7-tar.124-25d.JA2.tar 5.50Mb December 12 2014 at 06:56 c1240-k9w8-tar.124-25e.JAP.tar 4.80Mb December 1 2014 at 04:25 c1240-rcvk9w8-tar.124-25e.JAP.tar 2.82Mb December 1 2014 at 04:26 c1250-k9w8-tar.152-2.JA.tar 6.61Mb December 12 2014 at 06:56 c1310-k9w7-tar.124-25d.JA2.tar 5.36Mb December 12 2014 at 06:56 c1700-adventerprisek9-mz.124-15.T10.bin 25.45Mb December 12 2014 at 06:54 c1700-advsecurityk9-mz.124-15.T14.bin 16.03Mb December 12 2014 at 06:54 c181x-adventerprisek9-mz.151-4.M8.bin 29.16Mb December 12 2014 at 06:42 c1841-adventerprisek9-mz.124-22.YB6.bin 37.89Mb December 12 2014 at 06:44 c1841-adventerprisek9-mz.151-4.M.bin 45.10Mb December 12 2014 at 06:44 c1841-adventerprisek9-mz.151-4.M1.bin 45.14Mb December 12 2014 at 06:44


Well if you want autonomous mode you want to stay on one of the k9w8 images but you're trying to boot with a k9w7 image which is lightweight mode and requires a controller. (or at least I think I have the w8 and w7 modes right)


Ok, i got it to work after formating flash and uploading it again, but now when i try to configure anything in the webgui it just says 404, not found. I googled around and found out that some versions can be buggy, i have the ap3g1-k9w7-tar.153-3.jf15.tar. Has anyone got problems with that? Or anyone that knows how to solve the problem?


First download a fully functional or recovery mode CAPWAP file suitable for the AP model. In our example we will be converting a Cisco 3502 AP and decided to download the appropriate recovery mode file: ap3g1-rcvk9w8-tar.152-4.JB6.tar.

0aad45d008