Golfsmith XPC Plus woods
m...@jetlink.net
TCDE...@ysub.ysu.edu (Dennis Konik) wrote:
>Does anyone use the XPC Plus woods from Golfsmith (steel or graphite)? Is this
>supposed to be a copy of the BB Warbird? It looks similar in the catalog but
>I'm not sure.
>
>Thanks.
>
>Dennis Konik <dennis...@ysu.edu>
>Youngstown State University Penguins
>Div. I-AA National Football Champs 1991, 1993, 1994 Runners-up 1979, 1992
Dennis,
I recently bought a full set of XPC Plus woods and irons and I'm
happy with them. The woods don't look much like the BB Warbird. If
anything, I think they intended to copy the sole design of the TM
Burner Bubble woods.
Mike
Dennis Konik
William Cochrane
I use them for driver and 5 wood and like them very much, as do friends for
whom I've built driver.
Sole plate does help scuffed shots straight, and help is forgiving. Set up
I find attractive.
I put them on Stratus shaft
Dennis Konik <TCDE...@ysub.ysu.edu> wrote in article
<177FDD5A6S...@ysub.ysu.edu>...
Bob Blair
In article <177FDD5A6S...@ysub.ysu.edu>, TCDE...@ysub.ysu.edu
says...
>
>Does anyone use the XPC Plus woods from Golfsmith (steel or graphite)?
Is this
>supposed to be a copy of the BB Warbird? It looks similar in the catalog
but
>I'm not sure.
>
>Thanks.
>
I just completed my 1,3,5 XPC Plus using the bulge shaft. My
unrepairable slice has been corrected by using the 2deg hook head. They
go straight and far( for me ). I have let friends hit them and they say
that they are every bit as good as their "BUBBLES" and at $50 for the
components you can afford to expermient with shafts to get the one for
you.
Good luck
Bob
Dennis Ward
I also just completed a set of XPC Plus woods 1 - 3 - 5 using GRAFFALLOY
graphites - Attach Lite. I used the graphite weighted heads for max
swingweight.
They hit straighter than my previous woods (from a fade/slice to
straight/fade).
I am pleased.
Dennis
Eric Burcham
On 10 Sep 1996 12:53:22 GMT, bbl...@cdsnet.net (Bob Blair) wrote:
>In article <177FDD5A6S...@ysub.ysu.edu>, TCDE...@ysub.ysu.edu
>says...
>>
>>Does anyone use the XPC Plus woods from Golfsmith (steel or graphite)?
........ <snip>
Bob... I have the XPC Plus 3 & 5-W with Aldila Low Torque 4.0 shafts,
standard length, and 2-LW with Brunswick Rifle 5.5 shafts. Have the
driver too, but built a 45" Ti-230 with Grafalloy ProLight shaft.
I've been trying to look for an excuse to build another set of irons,
but I honestly don't have an one! Really like the clubs...
----------------------------------------------------------------
Eric Burcham
(cra...@onramp.net, Eric.B...@target.commercemail.com)
----------------------------------------------------------------
Hugh Carson
Dennis,
I have a 3 wood XPC Plus with the Carbon Stick shaft. I have been using
it for over a year and it is my favorite club in the bag. I ordered the
XPC Plus driver today. I am going to try the ultra lite carbon stick
shaft with the graphite weighted head. I went from having a fade to the
nicest slight draw.
I really like my XPC Plus irons also.
-
HUGH CARSON CXW...@prodigy.com
Bangor, Maine.
Keith Bell
m...@jetlink.net wrote in article <32347...@news.jetlink.net>...
: TCDE...@ysub.ysu.edu (Dennis Konik) wrote:
:
: >Does anyone use the XPC Plus woods from Golfsmith (steel or graphite)?
Is this
: >supposed to be a copy of the BB Warbird? It looks similar in the catalog
but
: >I'm not sure.
: >
: >Thanks.
: >Dennis Konik <dennis...@ysu.edu>
: >Youngstown State University Penguins
: >Div. I-AA National Football Champs 1991, 1993, 1994 Runners-up 1979,
1992
: Dennis,
:
: I recently bought a full set of XPC Plus woods and irons and I'm
: happy with them. The woods don't look much like the BB Warbird. If
: anything, I think they intended to copy the sole design of the TM
: Burner Bubble woods.
:
: Mike
I have used the XPC Plus 1-3-5 woods for about 50 rounds and I really like
them. I use a 45" Grafalloy Pro M54-S shaft on the driver and 6.5 Rifle
shafts 1" over standard on the fairway woods. I feel no desire to change
any time soon. I am a 5.3 handicap and the clubs are better than I am.
- Keith
David Stuart
"William Cochrane" <wcoc...@inforamp.net> wrote:
>I use them for driver and 5 wood and like them very much, as do friends for
>whom I've built driver.
>Sole plate does help scuffed shots straight, and help is forgiving. Set up
>I find attractive.
>I put them on Stratus shaft
>Dennis Konik <TCDE...@ysub.ysu.edu> wrote in article
><177FDD5A6S...@ysub.ysu.edu>...
>> Does anyone use the XPC Plus woods from Golfsmith (steel or graphite)? Is
>this
>> supposed to be a copy of the BB Warbird? It looks similar in the catalog
>but
>> I'm not sure.
>>
>> Thanks.
>>
>> Dennis Konik <dennis...@ysu.edu>
>> Youngstown State University Penguins
>> Div. I-AA National Football Champs 1991, 1993, 1994 Runners-up 1979, 1992
>>
I use the XPC metal woods, which I assembled from a kit, and find them
to work great!! Much more forgiving on bad shots, than my previous
clubs.
David
"There are no strangers, just friends I haven't yet met!"