Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Bindings too tight
0 views
Skip to first unread message
PhifeDiggy
Dec 26, 1999, 3:00:00 AM12/26/99
to
Is it possible to fasten bindings to your board too tight? I want to make sure
that when I'm twisting those screws in hard I'm not messing up my board.
thanks
that when I'm twisting those screws in hard I'm not messing up my board.
thanks
Larri84
Dec 26, 1999, 3:00:00 AM12/26/99
to
if youre doing it by hand, i think its impossible to strip the holes in the
board. if youre using some sorta power tool to do it you should be more
careful. actually, dont use a power tool on your board. if you want the screws
real tight, you can just take your board into any shop that sells/repairs
snowboards and theyll prolly be happy to do it for you. i bet if you asked
nicely the shop on your mountain would be willing to switch up your bindings
for you.
board. if youre using some sorta power tool to do it you should be more
careful. actually, dont use a power tool on your board. if you want the screws
real tight, you can just take your board into any shop that sells/repairs
snowboards and theyll prolly be happy to do it for you. i bet if you asked
nicely the shop on your mountain would be willing to switch up your bindings
for you.
Wrongway15
Dec 28, 1999, 3:00:00 AM12/28/99
to
if u turn the screws to tight, youll see them pop out of the bottom of the
board, this is bad
board, this is bad
do not use an electric screwdriver
turn until tension starts to build, then add a quarter turn
0 new messages