Need Help Idenifying Interference on Voice of Korea Broadcast
Mike Chambers
Korea. However, I did not have much success due to some pretty strong
interference.
I am trying to determine the source of the interference (i.e. another
broadcast, or something electrical in / near my house).
I have posted a clip of the audio at:
http://mesh.typepad.com/blog/2006/12/no_success_at_f.html
Does any have any idea what the source of the interference might be?
Also, is anyone in the San Francisco area able to pull in Voice of Korea
at 9335 (or any other frequency)?
mike
mi...@sushi.com
John Smith I
> ...
> Does any have any idea what the source of the interference might be?
> Also, is anyone in the San Francisco area able to pull in Voice of Korea
> at 9335 (or any other frequency)?
>
> mike
Gwad, what a hoot!
When you read their propaganda it raises the hair on the back of your
neck ...
Regards,
JS
Mike Chambers
America. Ill try that tonight.
mike
Telamon
Mike Chambers <mikech...@gmail.com> wrote:
Sounds like a bad street lamp trying to turn on, failing, and cycling.
--
Telamon
Ventura, California
Dave
"Mike Chambers" <mikech...@gmail.com> wrote in message
news:CL6dndW1GZGU_QjY...@comcast.com...
I've managed to pull them in on 9335 a couple times (at 1300 UTC) but it
always fades out on me as the sun continues to climb. And I'm in Houston
with a 7600GR and about 110' of longwire on the roof. What is your setup?
When I was using just the whip antenna the S/N ratio was so low that I
couldn't make out anything other than the announcement that I was listening
to Voice of Korea. Nothing else recognizable, but it was all just
background noise.
Dave
Guerite.
"John Smith I" <assembl...@gmail.com> wrote
>
> Gwad, what a hoot!
>
> http://www.voiceofkorea.org/
>
> When you read their propaganda it raises the hair on the back of your
> neck ...
>
> Regards,
> JS
Interest in Communist North Korea News Explodes
http://www.nk-news.net/index.php
http://www.freewebs.com/dprk/
http://www.kcna.co.jp/
Mike Chambers
steep hill). I have the same issue as you, where if I dont connect the
wire, then the signal is too low to really pick up.
Would it help if I had a longer wire?
mike
mi...@sushi.com
That file was uploaded 2/10/2006, but I've listened to Voice of Korea
about two weeks ago. [Hey, it's painful to listen to that crap.]
I'll do another recording, but basically that is how it sounds. It's a
reasonably strong signal in the bay area. The recording was done in the
east bay.
Try your radio on Ocean Beach, Marin Headlands, etc. I think your noise
is local.
Dave
together (old phone wire, to be more exact.) This, I believe, gives a
better signal than just a single wire, but it is not that significant.
Length is far more productive in my experience. One question: does your
wire run by an air-conditioner or anything like that? Such a device would
definetly cause noise on your antenna. I run the wire into a piece of 50
ohm coax to get it by my air conditioner, and ground that first where it
comes off the roof and down to the ground and again where it goes up and
into my window. Totally quiet, when overall background noise drops out
enough to notice. I also inductively couple this to my whip antenna, to
gain the extra boost from the preamp attached to the whip. (Have a plug
that fits the external antenna jack, and clip this to some wire wrapped
several times around the whip.)
If any of this helps, let me know and I will see if I can come up with
anything else...
Regards,
Dave
"Mike Chambers" <mikech...@gmail.com> wrote in message
news:2006122911392716807-mikechambers@gmailcom...
Mike Chambers
figure it out.
I think that most of the noise is actually coming from my house, and if
the wire picks it up, it is probably near to where ther eceiver is.
I just ran to wire high, to see if that helps, and tomorrow i am running
a new, longer length that will be even higher. If that is still noisy,
then I am going to look into running coax from the wire (connecting near
the roof), to the receiver. I need to read up on that some more.
Also, I dont have the wire grounded. I have been reading on that also,
but am not yet clear on what, if anything i actually need to do.
mike
Mike Chambers
interference started up again. I went out to the corner, and sure
enough, the light was out.
I took my radio out there, and the interference was definately from
there. Once my eyes got used to the dark, I could even faintly see the
light trying to come on (in sync with the interference).
Now I just have to figure out how to get it fixed.
thanks again...
mike
Dave
> Thanks. That is very helpful. I am new to all of this, and trying to
> figure it out.
>
> I think that most of the noise is actually coming from my house, and if
> the wire picks it up, it is probably near to where ther eceiver is.
>
> I just ran to wire high, to see if that helps, and tomorrow i am running a
> new, longer length that will be even higher. If that is still noisy, then
> I am going to look into running coax from the wire (connecting near the
> roof), to the receiver. I need to read up on that some more.
>
> Also, I dont have the wire grounded. I have been reading on that also, but
> am not yet clear on what, if anything i actually need to do.
>
> mike
>
>
For grounding, I bought two eight or ten foot grounding rods from Home Depot
(copper coated steel with one end pointed and the other having the edges
rounded off) and drove them into the gumbo we call dirt around here with a
three-pound sledge (I think.) Got some grounding blocks from the local
parts depot and clamped them onto the rods with clamps also from Home Depot.
Fed the coax into and out of the grounding blocks so that the shield of the
coax made contact with the grounding blocks. Did this where the coax came
off the roof, and where it went into my window, so that the air conditioner
that the coax went past didn't cause any interference, and have a nice quiet
connection.
Good luck. Don't hesitate to ask if you have any questions. Someone will
have the answer.
Dave
Telamon
Mike Chambers <mikech...@gmail.com> wrote:
> On Fri, 29 Dec 2006 11:17:10 -0800, Telamon
> <telamon_s...@pacbell.net.is.invalid> wrote:
>
> >Sounds like a bad street lamp trying to turn on, failing, and cycling.
> >
> Telamon, Thanks for the hint! Tonight once if got dark, the
> interference started up again. I went out to the corner, and sure
> enough, the light was out.
>
> I took my radio out there, and the interference was definately from
> there. Once my eyes got used to the dark, I could even faintly see the
> light trying to come on (in sync with the interference).
>
> Now I just have to figure out how to get it fixed.
>
> thanks again...
No problem. The power company in your area probably has the
responsibility to keep the lights functional. Go to their web site or
phone them with the pole number and location description to report it.
They will get around to fixing it in a few days.
--
Telamon
Ventura, California