Any thoughts? Thanks in advance!
I really wanted the Clear Speech unit to blow the others away, as the demo
audio clips of the Clear Speech in auction were impressive. It just didn't
match up to the advance billing, in my opinion.
Guy Atkins
Puyallup, WA USA
<sdan...@nyc.rr.com> wrote in message
news:1104848550....@f14g2000cwb.googlegroups.com...
Dale W4OP
Thanks for the input. I'm also considering one of the Timewave
products, specifically the DSP-599zx, though even a used one is really
expensive and the reviews I've read about it have been mixed. It also
offers a lot more than I need. I don't work a lot with very narrow
bandwidths. I just want something that will allow me to cut through the
noise a bit better on SSB (and even on the broadcast bands, if
possible). The smartest thing for me to do might be to forget about DSP
and buy myself a 1980's vintage notch filter.
The Timewave DSP-59+ is a very good alternative to the top-end DSP-599zx.
I've owned both, and except for the nice LCD display and additional fixed,
narrow bandwidths for exotic modes, the SSB/AM mode performance is the same.
I recently auctioned one on Ebay for a little over $100. I didn't have need
of it any more, as my new rig has IF-DSP internally which works great.
I think the DSP-59+ is a great value for the voice modes, especially if the
unit has the newest ROM chip as mine did.
Guy
<sdan...@nyc.rr.com> wrote in message
news:1104865042.1...@c13g2000cwb.googlegroups.com...
They do an excellent job on cutting out white noise. I also use them
on bird song audios taken with a backyard bird microphone. It produces
a result that beats parabolic directional mics, cutting the noise by
supergaining in frequency rather than in direction. (So it will
take out all the ambient noise except the bird; but it will not take
out other birds, as a directional mic would. The directional mic
though is generally used to take out ambient noise, not other birds.)
They do produce a hiss that I guess is more noticeable in headphones.
I don't notice it at all on a speaker.
It blows the 599zx noise reduction away (for that feature of the
599zx - the 599zx has others).
Heil says he's improving the speaker, though I just put them in the
audio chain as a component where they're appropriate.
--
Ron Hardin
rhha...@mindspring.com
On the internet, nobody knows you're a jerk.
> Thanks for the input. I'm also considering one of the Timewave
> products, specifically the DSP-599zx, though even a used one is really
> expensive and the reviews I've read about it have been mixed. It also
> offers a lot more than I need. I don't work a lot with very narrow
> bandwidths. I just want something that will allow me to cut through
> the noise a bit better on SSB (and even on the broadcast bands, if
> possible). The smartest thing for me to do might be to forget about
> DSP and buy myself a 1980's vintage notch filter.
If notching is all you want to do, there are a number of DSP units available
(as well as excellent software) that witll provide DSP autonotch for any
receiver. Even the old Radio Shack DSP-40 units worked OK for notching out
hets. These can be found for ~$40 on Ebay.
--
Brian Denley
http://home.comcast.net/~b.denley/index.html