Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Programming Uniden BC-140 Scanner
288 views
Skip to first unread message
Lori & Robert Metz
May 25, 2000, 3:00:00 AM5/25/00
to
I need to know how to program an old Uniden (Radio Shack) BC-140
Scanner. I can enter a frequency by pressing "ch#" "manual" "the
freq" and "review" to check. But the channel returns to the old
frequency when any other key is pressed.
Any help here would be appreciated.
Thanks
Robert
Scanner. I can enter a frequency by pressing "ch#" "manual" "the
freq" and "review" to check. But the channel returns to the old
frequency when any other key is pressed.
Any help here would be appreciated.
Thanks
Robert
Dallas
May 25, 2000, 3:00:00 AM5/25/00
to
hi
ive got an old 50xl and to program it you select one of the 10 channels and
type the freq with the . and then hit the E button to enter it
ive got an old 50xl and to program it you select one of the 10 channels and
type the freq with the . and then hit the E button to enter it
hope this helps
dallas
VICTORIA (the place to be)
"Lori & Robert Metz" <rmetz...@worldnet.att.net> wrote in message
news:392CAAB7...@worldnet.att.net...
Pa...@sgi.net
May 25, 2000, 3:00:00 AM5/25/00
to
I'm not familiar with the model but here are a few ideas to consider:
1) press enter after you enter the new frequency
or
2) is there a program button on the radio? If so press it first then
your new frequency and then enter
Lori & Robert Metz
May 27, 2000, 3:00:00 AM5/27/00
to
Dallas
That worked great, Thanks
Robert
That worked great, Thanks
Robert
Dallas wrote:
>
> hi
> ive got an old 50xl and to program it you select one of the 10 channels and
> type the freq with the . and then hit the E button to enter it
>
> hope this helps
>
> dallas
>
> VICTORIA (the place to be)
>
> "Lori & Robert Metz" <rmetz...@worldnet.att.net> wrote in message
> news:392CAAB7...@worldnet.att.net...
0 new messages