[KD8CEC] uBITX Firmware CEC Version 1.097Beta Release(Include Nextion, TJC GUI Firmware V3)

[KD8CEC via rec.radio.amateur.moderated Admin]

KD8CEC Amateur Radio

///////////////////////////////////////////
uBITX Firmware CEC Version 1.097Beta Release(Include Nextion, TJC GUI
Firmware V3)

Posted: 04 Aug 2018 10:39 AM PDT
http://www.hamskey.com/2018/08/ubitx-firmware-cec-version-1097beta.html

uBITX Firmware CEC Version 1.097Beta Release(Include Nextion LCD, TJC LCD
GUI Firmware V3, uBITX Manager V1.097,
Standalone Signal Analyzer1 V1.0)

uBITX firmware CEC Version is based on uBITX which has not modified
anything. Prior to deployment, the 16x02 LCD with built-in is tested first.
Nextion LCD, TJC LCD, 20x04 LCD and I2C LCD are not essential for using
uBITX Firmware CEC version.In order to view signals with Character LCD or
Nextion LCD, Signal Meter Sensor must be installed. Of course, CEC Firmware
operates normally even if S-meter sensor is not installed.


1.Installation and Introduction
The link below contains installation instructions and basic usage, so this
post will briefly explain the
changes.http://www.hamskey.com/2018/06/ubitx-with-nextion-lcd-cec-firmware.html
1.1 Select .HEX file for uBITXprefix : UBITX_CEC_Version : Vxxxx
(ex: V1.097)LCD Type : _XXX (ex: 16x02 Parallel = 16P, 20x04 Parallel =
20P, 20x04 I2C = 20I, Nextion LCD = NX)Signal Meter Type (Option) : none :
Analaog Meter using A7 PIN _S :
I2C Signal Meter using I2C PortWhen I2C type signal-meter sensor is used,
end of filename ends with _S.
1.2 .Hex file for Standalone Signal Analyzer (I2C Type Signal-Meter) &
Installation
DSPMeter1_V0.5.hexhttp://www.hamskey.com/2018/07/standalone-signal-analyzer-i2c-type.htmlhttp://www.hamskey.com/2018/07/standalone-signal-analyzer-i2c-type_29.htmlhttp://www.hamskey.com/2018/08/standalone-signal-analyzer-i2c-type.html
2.uBITX Firmware CEC Version 1.097 and Nextion, TJC LCD GUI V3
DownloadPrecompiled .HEX
fileshttps://drive.google.com/open?id=1UuOCiHQFaFNdIwvQTd20dcT0Ju67Ch75
Nextion LCD GUI Files (include gui sourcefile (.hmi), precompiled
(.tft))Officaial Support 2.4", 2.8", but include 3.2, 3.5 for test (just
converted from 2.8")I have added 2.4".TFT files and uploaded again. If you
are using 2.4", download
again.https://drive.google.com/open?id=1CpfVWastQRHWSDt_TC9Dd2PHnLdrG_9a
TJC LCD GUI Files (include gui sourcefile (.hmi), precompiled
(.tft))Officaial Support 2.4", 2.8", but include 3.2, 3.5 for test (just
converted from
2.8")https://drive.google.com/open?id=1zT8ovI6Uh3BRZ6yzs3HkmHddKf5TwfwN
Nextion LCD GUI Template file for Developer, The Template file is a blank
screen that only communicates with
uBITX.https://drive.google.com/open?id=1k39IvfLt1uwyqB8cZdBC4FlM7ZQZb-xA
uBITX Manager Version
1.097https://drive.google.com/open?id=1DF0ida-QkXQ12J9XOKE19mmOLr-GKnwo
Standalone Signal Analyzer1 (I2C Type Signal-Meter)
V0.5https://drive.google.com/open?id=1Oc-bGS34f0ragGXQ1lK6HHB7GhZLHZrP
Since uBITX firmware source files will continue to change, we will push to
github when the beta period ends.
Standalone Signal Analyzer1 (I2C Type Signal-Meter) V0.5 Source
codehttps://github.com/phdlee/dspmeterv1

3.Changes and improvements3.1 Bug fixed (for all LCD version include
character LCD)minor bugs
3.2 uBITX Manager removed the Encode and Decode buttons. The procedure has
become a bit easier. (uBITX Manager Version 1.097)
3.3 I2C Device Scan


3.4 Recovery using QR-Code Data from ServerThis part will be posted
separately.

3.5 Si5351 I2C address can be changedYou should not use it in general. If
your I2C address is not 0x60, you can modify it here.You do not need to use
it if your uBITX is working normally
3.6 Support Standalone Signal Analyzer (I2C Type Signal
Meter)http://www.hamskey.com/2018/07/standalone-signal-analyzer-i2c-type.htmlhttp://www.hamskey.com/2018/07/standalone-signal-analyzer-i2c-type_29.htmlhttp://www.hamskey.com/2018/08/standalone-signal-analyzer-i2c-type.html

3.7 Nextion LCD and TJC LCD can display Spectrum and CW Decode.To use this
feature, you must use the Standalone Signal Analyzer.




3.8 CW Options settings in Nextion LCD (TJC LCD) using Touchmore
information :
http://www.hamskey.com/2018/07/setting-cw-options-in-ubitx-with.html
3.9 Quick Menu for CW in Nextion LCD (TJC LCD)
more information :
http://www.hamskey.com/2018/07/setting-cw-options-in-ubitx-with.html
3.10 UBITX source code modification for developersIt was an idea from the
bitx group two or three months ago.I have added an option to deactivate
each function in the source code.
This part will be posted separately.


4.Conclusion

This version is probably the last version of the beta version.I am going to
fix the bug and redistribute it to Version 1.1 if the problem does not
occur.I am always thankful to developers who are developing at different
resolutions of Nextion and TJC.


This part will be posted separately.