Bendix/King Programming info needed.
Gary Tait
I Have a Bendix/King LPI 5142 I need plans to build a programming innerface
for a PC ,and programming software I can download, or programming protocols.
Gary Tait,VE3VBF ; Homepage http://www.primeline.net/~tait
------------------------------------------------------------------
Please note that I use the Internet as a research / entertainment
tool ,and I shall not recieve Email regarding the purchase, trade
,or reccomendation of merchandise , services, or intellectual
property , unless I explicitly request such materials.
Ed G.
In article <899135432.500310@Virginia>, ta...@primeline.net (Gary Tait) wrote:
>I Have a Bendix/King LPI 5142 I need plans to build a programming innerface
>for a PC ,and programming software I can download, or programming protocols.
You are aware that the King HT radios can be programmed with the little
outboard "code plug" aren't you? It merely jumpers a couple contacts on the
speaker/mic jack at the appropriate time.
Ed
REPLY INFO:
===========================================================
Return address modified to prevent automatic SPAM response.
TO REPLY: remove the "lillypads" from my return address.
===========================================================
Dave Lewis
Ed G. wrote:
>
> In article <899135432.500310@Virginia>, ta...@primeline.net (Gary Tait) wrote:
>
> >I Have a Bendix/King LPI 5142 I need plans to build a programming innerface
> >for a PC ,and programming software I can download, or programming protocols.
>
> You are aware that the King HT radios can be programmed with the little
> outboard "code plug" aren't you? It merely jumpers a couple contacts on the
> speaker/mic jack at the appropriate time.
>
> Ed
>
Dave
Gary Tait
In article <6n98kq$9kq$1...@news.ncal.verio.com>, 207Lil...@Juno.com (Ed G.) wrote:
#In article <899135432.500310@Virginia>, ta...@primeline.net (Gary Tait) wrote:
#
#>I Have a Bendix/King LPI 5142 I need plans to build a programming innerface
#>for a PC ,and programming software I can download, or programming protocols.
#
# You are aware that the King HT radios can be programmed with the little
#outboard "code plug" aren't you? It merely jumpers a couple contacts on the
#speaker/mic jack at the appropriate time.
#
# Ed
#
# REPLY INFO:
# ===========================================================
# Return address modified to prevent automatic SPAM response.
# TO REPLY: remove the "lillypads" from my return address.
# ===========================================================
#
How do I make/use one .
Also What would the programmable frequency range be for this radio?
Ed G.
>How do I make/use one .
>
>Also What would the programmable frequency range be for this radio?
>
The program range is whatever the radio is spec'd at. As far as which two
pins to short, I would need to find a manual and look it up. Also, my
statement is specifically in reference to the EPH model HT. I just now
realized you cited a different model. This may not be applicable.
Ed
REPLY INFO:
===========================================================
Return address modified to prevent automatic SPAM response.
TO REPLY: remove the "lillypads" from my return address.
===========================================================
Dean Denter
In article <899135432.500310@virginia>,
ta...@primeline.net (Gary Tait) writes:
> I Have a Bendix/King LPI 5142 I need plans to build a programming innerface
>
>
I'm also looking for programming info for a Bendix/King radio, the model
number is LMH 3142. This is a VHF high band mobile 16 channel radio.
I also need details on the required modifications to get this radio to
accept programming for frequencies below 148MHz (its current lower limit).
Anyone got any info on this radio?
regards,
Dean -- VA3CDD
--
Dean Denter work -> dde...@nortel.ca
VA3CDD play -> dde...@ottawa.com
Current Wants: 70cm transvertor, 2M Amp 10Win/?Wout
[[[[[[[[[[[[[[I speak only for myself]]]]]]]]]]]]]]
Peter Efroymson
interface cable contact
Strine Electronics in Seeley LAke Mt
I cant remeber what it set me back but it was not
much
The programm for Ham coverage is "Ham and Eggs"
It may be on the net
Typing in "ham" changes the center frequency so 146
programming
Typing "Eggs" returns the radio to default settings
Richard D. Dierks, Jr.
>
> Programming the King reQuires the software and a
> interface cable contact
>
> Strine Electronics in Seeley LAke Mt
Does this apply to other Bendix/King radios as well? I recently
acquired a pair of LPH 5142 14-channel portables, and was told that
there was a fairly simple mod that would allow them to operate on 2
meters. If this can be accomplished by software instead of hardware, so
much the better.
I got a copy of most of the programming manual with the radios, but am
missing a couple parts. I'd also like to obtain a copy of the user's
manual for this radio. Is it possible to obtain these directly from
King, or is there a better source?
Thanks,
Richard Dierks, Jr., KC7DYK
dsp...@my-dejanews.com
band, you need the programming cable and the correct s/w file
referred to "green eggs and ham" for vhf and for uhf, you
"downband" the radio via the s/w.
> Does this apply to other Bendix/King radios as well? I recently
> acquired a pair of LPH 5142 14-channel portables, and was told that
> there was a fairly simple mod that would allow them to operate on 2
> meters. If this can be accomplished by software instead of hardware, so
> much the better.
>
> I got a copy of most of the programming manual with the radios, but am
> missing a couple parts. I'd also like to obtain a copy of the user's
> manual for this radio. Is it possible to obtain these directly from
> King, or is there a better source?
>
> Thanks,
>
> Richard Dierks, Jr., KC7DYK
>
-----== Posted via Deja News, The Leader in Internet Discussion ==-----
http://www.dejanews.com/rg_mkgrp.xp Create Your Own Free Member Forum