Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

[IW5EDI] DX Cluster Telnet Links

9 views
Skip to first unread message

IW5EDI via rec.radio.amateur.moderated Admin

unread,
Apr 12, 2020, 1:24:55 AM4/12/20
to

IW5EDI Simone - Ham-Radio

///////////////////////////////////////////
DX Cluster Telnet Links

Posted: 11 Apr 2020 04:25 PM PDT
http://www.iw5edi.com/ham-radio/3797/dx-cluster-telnet-links



Here is a list of dx clusters available via Internet using a Telnet client.









4N1EXY 147.91.21.15:8000 Belgrade, Serbia (KN04ft)
4N6DXS 195.66.179.242:8000 Herceg Novi, Montenegro
6L0NJ dxc.dx.or.kr South Korea
7N4TWL 7n4twl.homeip.net:8000 Oota-ku, Japan
9A0CSI ham.dyndns.org:7300 Sibenek, Croatia
9A0DXC bbs.cc.fer.hr:8000 Croatia
AA2MF dxc.aa2mf.net Staten Island, N.Y.
AB5K dxc.ab5k.net Bee Cave, Tx (Note: World wide spots)
AB5K dxc-us.ab5k.net Bee Cave, Tx (Note: Contains only spots from USA and
Canada)
AB7AA 66.1.40.120 Tucson, Az.
AD1C dxc.ad1c.us N. Chelmsford, Ma.
CE4UYP 146.83.196.31:9000 Chile
CS1SEL hamradio.isel.ipl.pt:41112 Chelas, Portugal
CT2GWY 217.129.65.194:8181 Beja, Portugal (IM68ba)
CX2SA cx2sa.dyndns.org:9000 Minas, Uruguay
DB0ERF db0erf.de:41113 Germany (JO50mx)
DB0FHN db0fhn.efi.fh-nuernberg.de:7300 Nuernberg, Germany
DB0HGW db0hgw.dyndns.org:4111 Greifswald, Germany
DB0LJ db0lj.dyndns.org:41112 Kruft, Germany
DB0SPC db0spc.myvnc.com:8000 Mainz, Germany
DB0SUE db0sue-7.ath.cx:8000 Suederbrarup, Germany
EA1CYZ clx.inetd.nl:9000 Pontedeume, Spain
EA1DX 80.33.77.226:7000 Cehegin, Spain
EA1URF 193.147.32.168:41112 Spain Also:
EA2AAA ea2aaa.sytes.net:41112 Spain
EA2F 213.96.137.53:9001 Vitoria-Gasteiz, Spain
EA3AKS ea3aks.org:41112 Sant Pere De Ribes, Spain
EA3MM 80.32.111.228:9000 Barcelona, Spain
EA4URE eadx.net Madrid, Spain
EA5C cluster.ea5rcg.org:8000 Gandia, Spain
EA5ELX ea5elx.sytes.net:8000 Elche, Spain
EA5O 80.37.216.210:9000 Spain
EA5RCG ea5afp.no-ip.org:8000 Grandia
EA5RKV ea5akc.myftp.org:24 San Vicente, Spain
EA5URF campelo.cdf.udc.es:8000 Ferrol, Spain
EA5URM ea5urm.dns2go.com 7000 Murcia-Spain
EA5URV clusea5.uv.es:41112 Spain
EA7URC dx.ea7urc.org:41112 Spain
EA7URG 80.36.72.248:8001 Grenada, Spain
EA7URM ea7urm.org:8000 Malaga, Spain
EA7URP 80.24.73.234:8000 Almeria, Spain
EA8URL 213.96.177.244:8000 Canary Islands
EB4CTD eb4ctd.myftp.org 9000 Mostoles, Spain
ED1ZAC 80.32.9.99:8000 Carino, Spain
ED3ZAG 147.83.156.33:8000 Barcelona , Spain
ED7ZAB dx.ea7urc.org:8000 Spain
EI7MRE mayodx.ath.cx:7300 Mayo, Ireland
EI7SDX shandx.ath.cx:5000 Shankill, Ireland
EI7WDX wdx.ath.cx:7300 Bray, Ireland
EV1AR 193.232.250.249:41112 Belarus
F1NNI f6kbi.dyndns.org:9000 Coray, France (IN88cb)
F3KT f3kt.dyndns.org 9000 Port Saint Martin, France
F5MZN 213.41.172.193:9000 Eaubonne, France (JN18dx)
F5NOD f5nod.dyndns.org:7300 Moidieu, France (JN25ll)
F6BVP 82.66.61.83:9000 Paris, France (JN18dv)
F6CDD 82.236.244.181:9000 Toulouse, France
F6GGY f6ggy.dyndns.org:9000 Monflanquin, France
F6KBI f6kbi.dyndns.org:9000 Coray France (IN88cb)
F6KBK f6gcp-pat.dyndns.org:7300 Faremoutieers France
F6KDF f6kdf.ath.cx:7300 Lyon, France
F6KMO f6kmo.dyndns.org:9000 Cadex, France
F8CIY f8ciy.servehttp.com:9000 La Ferrière, France
F8KGK f8kgk.dyndns.org:9000 Rouen, France (JN09mj)
G7RAU g7rau.demon.co.uk:7374 Whippingham, UK
GB7BAA gb7baa.com:7300 Worchester, UK
GB7BUX dxc.gb7bux.co.uk:7300 Buxton, UK
GB7CGL gb7cgl.ath.cx Wool, Dorset, UK
GB7CGL-1 gb7cgl.ath.cx:7300 Wool, Dorset, UK
GB7DJK gb7djk.dxcluster.net:7300 East Dereham, UK
GB7DXA nt.amersham.net:7300 Amersham, UK
GB7DXE gb7dxe.dyndns.org:7300 Witham, UK
GB7DXG gb7dxg.shacknet.nu Guernsey
GB7DXM gb7dxm.shacknet.nu:7300 Suffolk, UK
GB7EDX gb7edx.com:23 Eastleigh, England
GB7IMK taurus2.plus.com:7300 Bletchley, UK (IO91ox)
GB7IPT gb7tf.org.uk:8000 Dawley, UK
GB7MBC gb7mbc.spoo.org:8000 Morecambe, UK
GB7NHR gb7nhr.shacknet.nu:7300 Derby, UK
GB7SDX gb7sdx.ath.cx:7300 Glasgow, Scotland
GB7UJS gb7ujs.shacknet.nu:7373 Wixhall, UK
GB7WDX gb7wdx.homelinux.net:8000 Somerset, UK
GB7XDX gmdx.tzo.com:23 Scotland
GB7YDX gb7ydx.ath.cx:7300 Barnsley, UK
GB7YFS gb7yfs.org.uk:8001 Bourne, UK
HA5DI ha5di.dyndns.org:8000 Budapest, Hungary
HA5DXC ha7cr.homelinux.net:8000 nr: Budapest, Hungary
HA6DX dx.hu:9000 Szecseny, Hungary
HB9DRV www.ham-radio.ch:7300 Laax, Switzerland
HB9GL dx.hb9gl.ch:7300 Luchsingen, Switzerland
HB9IAC www.iapc.ch:8000 Geneva, Switzerland
HB9OK www.hb9ok.org:4000 Switzerland
HG8PRC hg8lxl.ham.hu:8000 Csongrad, Hungary (KN06br)
HP2AT 200.46.129.2:9000 Colon, Panama
HS0ZER hs0zer.no-ip.com:9000 Bankok, Thailand
I0INU i0inu.dyndns.org 7300 Terni, Italy
I5UXJ i5uxj-2.cln.it:8000 Italy
I6FLD 151.8.162.130:40112 Montone, Italy
I8NHJ 193.207.106.230 Campobosso, Italy
IK0XWV ik0xwv.dyndns.org:9000 Rieti, Italy (JN62kj)
IK1HJS 84.253.133.59:7300 Genova, Italy
IK1ZNW 213.254.10.100:8000 Torino, Italy
IK1ZNW 213.254.10.100:9000 Torino, Italy
IK2XDE 80.67.113.160:8000 Carmenate, Italy
IK3EDJ 62.110.106.170:9000 Pordenone, Italy
IK4ICZ ik4icz.dyndns.org:8000 Ravenna Italy
IK5PWJ ik5pwj-6.dyndns.org:8000 Montecarlo LU Italy
IK5YZW ik5yzw.dyndns.org:8000 Lucca, Italy
IK5ZUK ik5zuk.dyndns.org:8000nn Pisa, Italy
IK5ZUK ik5zuk.dyndns.org:9000 Pisa, Italy
IK6GPZ 151.8.162.130:41112 Roseto, Italy
IK6IHH 151.8.162.130:9000 Roseto, Italy
IK6IHL 81.73.149.81:40112 Sulmona, Italy
IK6SNR 151.8.162.130:9000 Controguerra, Italy
IK6TJX 81.73.149.81:9000 Sulmona, Italy
IK7IMO ik7imo.dyndns.org:7000 Lecce, Italy (JN90co)
IK7MCJ ik7mcj-6.dyndns.org:7000 Taranto, Ita;y Also:
IK7NXQ ik7nxu.dyndns.org:9000 Andria, Italy
IK7NXU ik7nxu.dyndns.org:8000 Andria, Italy
IK7QLZ ik7qlz.dyndns.org:7000 Taranto, Italy
IK8HJC ik8hjc.dyndns.org:8000 Battipaglia, Italy
IK8UHA ik8uha.dyndns.org:9000 Italy (JN70dv)
IK8VRN ik8vrn.dyndns.org:7000 Marigliano-Naples, Italy
IQ4AX 195.43.189.178:8000 Modena, Italy
IQ4RN 195.223.80.85:8000 Rimini, Italy
IQ8BB 80.205.215.149:8000 Salerno, Italy
IQ8DA iq8da.dyndns.org:9000 Battipaglia, Italy
IR3DXC gw.ir3ip.ampr.org:41112 Treviso, Italy
IR4AD ir4ad.tzo.com Parma, Italy
IR4U ir4u.dyndns.org:8000 Cesena, Italy
IR4X 80.183.201.33:8000 Bologna, Italy
IR6IHL 81.73.149.81:41112 Sulmona, Italy
IR8AW ir8aw.dyndns.org:9000 Naples, Italy
IS0GRB is0grb.ods.org:41112 Quartu Sardinia
IT9DLN it9dln.homeip.net:41112 Menfi, Sicily
IT9HZC 62.94.37.234:8000 Trecastagni, Sicily
IT9LCP 151.38.27.197:41112 Acireale, Sicily
IT9OBK it9obk.org:41112 Messina, Sicily Also:
IW2ESA iw2esa.dyndns.org:7300 Varese, Italy
IW2OAZ iw2oaz.dyndns.org:7300 Arno, Italy
IW5ECF ham.homelinux.org:8000 Lucca, Italy
IW8PGT iw8pgt.homeip.net:8000 Mendicino, Italy
IZ0AWG iz0awg.no-ip.org:7300 Italy
IZ5FSA iz5fsa.homedns.org:7300 Signa, Italy
IZ6DDQ 193.205.128.28:41112 Ancona, Italy
IZ6FZS iz6fzs.dyndns.org:9000 Italy
IZ7AUH dx.iz7auh.net:8000 Taranto, Italy
IZ7QLZ ik7qlz.dyndns.org:7000 Taranto, Italy
IZ8BRI iz8bri.dyndns.org:9000 Cetraro, Italy
IZ8CCW 160.97.55.211:9000 Italy
IZ8FST iz8fst.dyndns.org:9000 Italy
JA1BWA ja1bwa.ddo.jp:8010 Funabashi, Japan
JA2YYF ja2yyf.dxcluster.jp:23 Nagoya, Japan
JA2YYF ja2yyf.dxcluster.jp:7300 Nagoya, Japan
JA3QGI linux.figaro.gr.jp:41112 Kyoto,Japan
JA3ZWB 219.114.252.219:9000 Osaka. Japan
JA4PXC ueda-sj.ddo.jp:8000 Japan
JA8IYI ja8iyi-telnet.jp:23 Sapporo City, Japan
JA9IPF ja9ipf.dyndns.org:9000 Toyama, Japan
JE3YEK ja3yaq.ampr.org:9000 Mukou City, Japan
JF1OCQ w1vx.zive.net Maebashi, Japan
JG1VGX dxc.jg1vgx.net:7300 Fujimi city, Saitama, Japan
JH1RFM jh1rfm.ddo.jp:7300 Tochigi, Japan
JH2ZYY jh2zyy.d2g.com Japan
JH3LFL 218.180.120.29:41112 Urayasu, Japan
JH6VLF jh6vlf.ddo.jp:8000 Ibaraki, Japan
JI2ZMJ ji2zmj.dyndns.org:9000 Nabari Mie, Japan
JK1ZRW jk1zrw.dyndns.org:41112 Tokyo, Japan
JL1UXH kk2h.shacknet.nu:23 Japan
K0GND k0gnd.unl.edu Lincoln, Ne.
K1AJ k1aj.mine.nu:7300 Boston, Ma.
K1EA dxc.k1ea.com:7300 Harvard, Ma.
K1EU k1eu.dynip.com North Yarmouth, Me.
K1NT 12.37.63.25 Leonard, Tx.
K1RK falara.whoi.edu Woods Hole, Ma.
K1TTT k1ttt.net Peru, Ma.
K1XX dxc.k1xx.com:7300 Grant, Fl.
K2CAN k2can.net:4000 Bristol, N.Y.
K2LS dxc.k2ls.com Merrick, N.Y. (Note: Spots from USA/CANADA/CARIB Zones 1
thru 8 ONLY & No CHAT/TALK Messages please)
K2UT k2ut.gofrc.org Medford, N.J.
K3NC k3nc.no-ip.com:41112 Fredericksburg, VA.
K3SKE 206.83.246.4 Frederick Cty, Md.
K3UK cluster.dynalias.org Fredonia, N.Y.
K3WW k3ww.gofrc.org:7300 Perkasie, Pa.
K4JW k4jw.no-ip.com:41414 Chattanooga, Tn
K4MD k4md.no-ip.com Charlotte, N.C.
K4QC hvldx.tzo.com:41112 Etowah,N.C.
K4SAC 208.47.93.174:7300 Owensboro, Ky.
K4UP k4up.tzo.com Rocky Mount, N.C.
K4UGA 128.192.52.40:599 Athens, Ga.
K5BLV 68.209.156.142 Lafayette, La.
K5DX 24.153.160.22 Houston, Tx.
K5MDX 208.164.147.68 McHenry, Ms.
K5PLD 67.10.135.181:8000 Pearland, Tx.
K5UTD k5utd.utdallas.edu Dallas, Tx.
K6EXO k6exo.dyndns.org:7300 Los Angeles, Ca.
K6LLK dxc.k6llk.com S. Lake Tahoe, Ca
K6NP k6np.no-ip.org Rio Linda, Ca.
K7AR k7ar.net:7300 Vancouver, Wa.
K7EK k7ek.dyndns.org:9000 Spanaway, Wa.
K8AZ k8az.no-ip.com Chesterland, Oh.
K8NA k8na.com Troy, Mi. Also:
K8SMC 198.109.212.235 Jackson, Mi. Also:
K9AJ dxc.k9aj.net Crete, Il.
K9CW rosebud.ece.uiuc.edu-8000 Urbana, Il. (Note: Contains only spots from
USA and Canada)
K9USA 130.126.139.93:8000 Urbana, Il. (Note: World wide spots)
KA5EYH dxc-ka5eyh.drhnet.com San Antonio, Tx. Also:
KB1H dxc.kb1h.com:7300 East Killingly, Ct.
KC0DJO kc0djo.dynip.com Duluth, Mn.
KC2CWT kc2cwt.homeip.net:7300 Carmel, N.Y.
KC5NYO kc5nyo.dns2go.com Lawton, Ok.
KD4GCA kd4gca.dyndns.org:7300 Gastonia, N.C.
KE2OI ke2oi-dxc.dyndns.org:7300 Bayville, N.Y.
KG5NE kg5ne.no-ip.com Mansfield, Ar.
KL7G 69.178.9.102:8000 Anchorage, Alaska
KN2M kn2m.d2g.com Buffalo, N.Y.
KN4F dxc.kn4f.net Memphis,Tn.
KN8COQ kn8coq.wmfd.com Mansfield, Oh.
KN9N kn9n.no-ip.org 7300 Sycamore, IL
KP3DX 136.145.86.189 San Juan, P.R. Also:
KP4IG kp4ig.merseine.nu 9000 Juana Diaz, PR
KR9U kr9u.net Fort Wayne, In.
KS4Q dx.ks4q.net Cumming, Ga.
KS9W 216.36.97.248 Woodstock, Il.
KY4DX ky4dx.no-ip.com Louisville, Ky.
LA1B 193.75.61.192:7300 Sotra, Norway
LA3R la3r-6.shacknet.nu 9000 Hamar, Norway
LA7Q cobranett.no-ip.info:9000 Trondheim, Norway
LU5YBR 200.16.245.244:9000 Neuquen, Argentina Also:
LU6DTS lu6dts.com.ar:41112 La Plata, Argentina
M0UKC m0clw.shacknet.nu:7376 Edlesborough, England
N0CDA n0cda.homedns.org:7300 Colorado Springs, Co.
N0VD cluster.dx-central.com Woodland Park, Co.
N1HEJ 24.151.230.209: 7300 Blountville, Tn.
N1OFZ n1ofz.dyndns.org:7300 Brookfield, Ct.
N1UAN n1uan.dyndns.org:7300 Kingsport, Tn.
N1URO dx.n1uro.com:9001 Springfield, Ma.
N2KI dxc.n2ki.com:7300 Montgomery, NY
N2XWV dxc.n2xwv-4.com:7300 Burlington Flats, NY
N3MEQ n3meq.dynip.com:8000 Wilmington, De.
N3RA dx.n3ra.com Youngstown, Oh.
N4SER n4ser.dyndns.org Sarasota, Fl.
N4VVF dx.harwood.com:8000 Ringgold, Ga.
N4ZKF dxc.n4zkf.com Daytona Beach, Fl.
N5IN n5in.digikey.com Thief River Falls, Mn.
N5UXT dxc.n5uxt.net New Orleans, La. Also:
N6WS n6ws.dyndns.org:7300 Nipoma, Ca.
N7OD n7od.pentux.net Hemet, Ca.
N7TR dxc.n7tr.com Reno, Nv.
N7XY n7xy.net:7300 Bainbridge Island, Wa.
N8NM n8nm.servebeer.com Waterford, MI.
N8OJ 69.166.150.185:7300 Little Hocking, Oh.
N9BMS 66.84.210.68 Appleton, Wi.
N9JR dx.n9jr.com:7300 Milwaukee, Wi.
N9KT n9kt.dyndns.org:8000 Indianapolis, In.
N9MW www.n9mw.com Blanchardville, Wi.
N9MXT n9mxt.tzo.com:23 Lake in the Hills, Il.
NA2NA na2na.net Niskayuna, N.Y.
NC7J nc7j.qrq.com:8000 Clearfield, Utah
NE3H ne3h.no-ip.com Camp Hill, Pa.
NG2P 66.67.220.251:7300 Rochester, NY.
NJ7I nj7i.net Apache Junction, Az.
NN1D n1ldy.ath.cx:7300 Swansea, Ma.
OH2J joni.connect.fi:7300 Espoo, Finland
OH5NK www.twoy.net:8000 Rajamaki, Finland
OH5RBI 217.25.99.10:8000 Imatra, Finland
OK0DXH 194.213.40.187:41112 Libenice, Czech Republic
OK0DXI radio.nagano.cz:41112 Nagano, Czech. Republic
ON0DXC-5 on0dxc.dyndns.org:8000 Liège, Belgium
ON0DXK 193.191.136.222:8000 Kortrijk, Belgium
ON0NOL nolcluster.dyndns.org:9000 Belgium (JO21rd)
ON0RET on0ret.dyndns.org:8000 Retinne Liege, Belgium
OZ2DXC 80.198.77.12:8000 Copenhagen, Denmark
OZ5BBS 194.192.135.177:8000 Denmark
OZ5DIG 194.192.135.177:53 Denmark Type: DXC
OZ7DXC 80.197.188.226:9000 Denmark
PA1RBZ pa1rbz.dyndns.org:9000 Netherlands
PA5KT pa5kt.dyndns.org:7530 Goes-Zeeland, Netherlands
PA6NL dxc.pa6.nl:23 Wassenaar, Netherlands (JO22fd)
PC5W 80.126.235.11:8000 Brunssum, Netherlands (JO20xw)
PE1M pe1m.dyndns.org:9000 Midden-Friesland, Netherlands
PI4CC dxc.pi4cc.net:8000 Netherlands Type: DXC
PI5EHV 131.155.192.179:8000 Netherlands
PI8DXC pi8dxc.dynanic.com:41112 Voorburg, Netherlands
PI8DXQ pa3aes.dyndns.org:41112 Enkhuizen, Netherlands
PI8DXQ pi8wfl.dyndns.org:7300 Enkhuizen, Netherlands
PP5AQ 200.180.51.100:8000 Blumenau, Brazil
PY3NZ 200.143.84.5 8000 Brazil
PY5UFP dxc.amprnet.org.br:9000 Brazil
RK2FWB gw-radiocluster.gazinter.net:8000 Kaliningrad
RK6EWX vreal.ru:7300 Cherkeesk, Eur.Russia
RN6BN rn6bn.73.ru Krasnodar, Eur. Russia
RU9CZZ 195.38.48.61:41112 Asiatic Russia
RV0AEV dxc.andys.ru:41112 Asiatic Russia Zone 18
RW3XA dx.obninsk.org:41112 European Russia
RX4HW 80.82.166.85 Samara European Russia
RZ1AWT 194.85.123.108:41112 Europea n Russia Also:
S50CLX bonaparte.infrax.si:41112 Cerkno, Slovenia (JN66xd)
S50DXS s50dxs.ods.org port 8000 Slovenia
SK0BU 130.237.41.41:8000 Stockholm, Sweden
SK0BU 130.237.41.41:41112 Stockholm, Sweden
SK2AU sk2au.mine.nu Skelleftea, Sweden
SK3GW sk3gw.shacknet.nu:8000 Gavle, Sweden
SK3W sk3w.shacknet.nu:8000 Sollentuna, Sweden
SK4BX cluster.sk4bx.se:8000 Fjugesta, Sweden
SK6LK packet.sk6lk.se:7300 Sweden
SK7AX sm7ndx.dyndns.org:8000 Tenhult, Sweden
SL2ZA 212.32.170.228:7300 Umea, Sweden
SM0RUX ax25.org:41112 Stockholm- Alvsjo, Sweden
SM4ONW cluster.sk4bw.net:8000 Berlenge, Sweden
SM5XGP sm5xgp.dyndns.org:7300 Vasteras, Sweden
SM6HOC sm6hoc.dyndns.org:7300 Hoekerum, Sweden
SM6YOU sector7.nu-8000 Gothenburg, Sweden
SM7GVF sm7gvf.dyndns.org 3692 Vaxjo, Sweden
SM7TIX sm7tix.mine.nu:41112 Kristianstad, Sweden
SP1LOP 62.69.192.233:9000 Szczecin, Poland (JO73gk)
SR4DXC sr4dxc.jestok.com:9000 Poland
SR9DDF 157.158.185.199:9000 Gliwice, Poland (JO90ig)
SR9ZAA 195.150.236.250:9000 Krakow, Poland (JO90xb)
SV1CPO 213.5.193.22:8000 Athens, Greece
SV1DAY sv1day.homeip.net Athens, Greece
SV2DWG 62.38.223.163:7300 Greece
SZ1SV cluster.redirectme.net Greece
TU5EX tu5ex.no-ip.org:9000 Abidjan, Ivory Coast
UA4CC remo3.renet.ru: 8000 Saratov, Eur. Russia
UA4FBG dx.penzanet.ru:8000 Eur. Russia
US5WE 213.130.17.137:41112 Lvivski, Ukraine
VA3MW va3mw.homeip.net:41112 Mississauga, On.
VA3SBX va3sbx.dyndns.org:7300 Toronto, On.
VE1DXI ve1dxi.no-ip.com Lake Echo, N.S.
VE2PKT ve2pkt.dyndns.org:9000 Ste-Catherine de Jacques-Cartier, QC.
VE3CGR ve3cgr.dyndns.org:7300 Aurora, On.
VE3EY dx.fireroute.com Toronto, On.
VE3FJB ve3fjb.dyndns.org:41112 Barrie, On.
VE3KYG ve3kyg.dyndns.org:7300 Oxford Mills, On.
VE5BT ve5bt.no-ip.ca:41112 St. Alberts, Sk.
VE6AAA dxc.ve7cc.net:7373 Vancouver, B.C.
VE6DXC dxc.middlebrook.ca:8000 Calgary, Ab.
VE6DXD ve6dxd.tzo.com Edmonton, Ab.
VE6TN dx.middlebrook.ca Calgary, Ab.
VE7CC dxc.ve7cc.net Whonnock, B.C.
VE9EMO 142.139.0.194 Fredericton, N.B.
VK3APC vk3apc.mdrc.org.au:41112 Hilett, Australia
VK3AVE vk3ave.net:41112 St Albans,Vic, Australia
VK3FRS cluster.vk3frs.net:4001 Kilsyth, Vic, Australia
VK7HDM 203.27.101.82:7300 Gagebrook, Australia
VU3SPQ dxcluster.in Hyderabad, India
VY2CC vy2cc.no-ip.com:7300 Summerside, P.E.I.
W0MU w0mu.net Castle Rock, Co.
W0MW w0mw.dynip.com Olathe, Ks.
W0TDX w0tdx.no-ip.com Northfield, Mn.
W1AAA dxusa.net:7300 Ledyard, Ct.
W1GQ dx.w1gq.net Londonderry N.H.
W1NGL w1ngl.no-ip.org:9000 Salem, Or.
W1NR dxc.w1nr.net Marlborough, Ma.
W2GSB 24.187.233.93 Babylon, N.Y.
W2MU 24.164.165.242:8000 Saugerties, N.Y.
W2PS w2ps.tzo.com Lathan, N.Y.
W3FRC w3frc.gofrc.org:7300 Phoenixville, Pa.
W3LPL dxc.w3lpl.net Glenwood,Md.
W4LEE 204.29.106.100 Opelika, Al.
W4ML dxc.w4ml.net Richmond, Va.
W4NJA 216.135.37.195 Paducah, Ky.
W4QB nadxc.no-ip.org:7300 Huntsville, Al.
W4TO w4to.no-ip.com Concord, Tn.
W4UAT nf6s.no-ip.com Livermore, Ca
W4ZR w4zr.dyndns.org Jacksonville, Fl.
W6KK w6kk.zapto.org:7300 Alta Loma, Ca. (Note: Contains only spots from
North America)

The post DX Cluster Telnet Links appeared first on IW5EDI Simone -
Ham-Radio.


///////////////////////////////////////////
Instructions for Putting up a Long-Wire Antenna

Posted: 11 Apr 2020 04:20 PM PDT
http://www.iw5edi.com/ham-radio/3792/instructions-for-putting-up-a-long-wire-antenna



Ive actually used this kind of antenna. When I was a teenager, I used it
with my old Realistic stereo receiver to improve its AM reception, and it
did work. (My dad put it up for me.)








Note: RadioShack sells this antenna as a kit, catalog # 278-758, $9.99 in
their 2000 Catalog. You might also find it from other electronics
suppliers. They sell the antenna wire as catalog # 278-1329, $6.99 in the
same catalog. The insulators can be ordered for shipment to your house
through RadioShack RSU catalog # 12099248, $4.79 + shipping in the 2000
Catalog.




Find two points, such as two poles (NOT utility poles!), or as most people
will do, the corner of your house and a tree. Any safe places above the
ground from which you can string this wire will do. Remember that not just
the mounting places, but the air-space through which the wire will be
strung must be free of obstructions, such as trees, and especially power
lines. Whatever you do, dont put it on the same corner of the house through
which your electrical service enters! First, that will be dangerous, and
second, youll pick up power line noise.








This antenna picks up signals best at right angles. It picks up worst
end-on. Therefore, remember to orient the wire to pick up from the
direction in which you are most interested.




Using an eye-hook at each point, attach a length of nylon rope. Tie the
other end of the nylon rope to each insulator. The bare copper wire is
strung from between the insulators, as shown in the diagram.




Use an insulated wire to connect to the copper wire at the end closest to
your radio. Strip a couple inches of it and wrap it around the bare copper
wire. For best results, solder this connection. This is shown in Figure 2.








If you string the wire from a stationary point (such as a house) to a tree,
use this trick that my father taught me, and that Ham Radio operators use.
You see, the tree will sway in the breeze, stretching the wire over and
over, eventually breaking it. So on the tree, instead of using a plain
eye-hook, put up a pully (such as a clothsline pully). Run the nylon rope
through this pully, letting a few feet hang down, and tie a brick (or
suitable heavy weight) to the end of the rope. This is what I have
illustrated in the first diagram. As the tree sways in the breeze, the rope
moves feely through the pully, and the weight of the brick keeps the whole
thing taut.




Grounding: From the ground terminal on your radio (next to the antenna
terminal) run a wire to either a copper cold-water pipe (PVC pipe wont
work) or a copper ground rod driven into the ground.



Some safety notes:




1. Keep your antenna far away from power lines! If you, your antenna or
your ladder touches a power line, you could be KILLED.




2. Remember that you will be climbing ladders or trees to high place.
Observe every safety precaution. Never extend the ladder beyond the
manufacturers reccomendation. Never stretch to reach a point instead, move
the ladder. Have the ladder on a secure footing, and have someone there to
hold the ladder.




3. Make sure your antenna is in a safe place, high enough so people or pets
wont walk into it by accident. (Plus, the higher up you get it, the better
it works).




4. Use lightening protection! Make provisions to disconnect and ground the
antenna when not in use. C. Crane Company and RadioShack offer lightening
protection devices. However, disconnecting and grounding the antenna is
still the best option. RadioShack sells a simple knife switch you can use
for this. Screw it to the wall or table next to the radio, hook one side to
the antanna, the other to a wire leading to a copper grounding rod, or the
copper cold-water pipe leading outside of your house. (Remember this doesnt
work if you forget to throw the switch!)



And the Disclaimer




This information is provided with no warranty express or implied. Remember
you are using information downloaded off the internet. Generally speaking,
anyone can post information on the net, whether qualified in a particular
subject or not. By attempting this project, you are doing something you
read about that was posted on the net by somenone you dont even know.
(Nevertheless, I have tried to make this information as accurate as I can.)
Observe all safety precautions, and use common sense! If you are not sure
about what you are doing, have someone help you, either a truly
knowledgable friend, or a professional. Its better to spend a little money
to have a professional do something than to wind up hurt or dead. Be
careful!




file originally stored at
geocities.com/SunsetStrip/Towers/3332/wireantenna.html

The post Instructions for Putting up a Long-Wire Antenna appeared first on
IW5EDI Simone - Ham-Radio.


///////////////////////////////////////////
The Vertical Bazooka Antenna

Posted: 11 Apr 2020 03:52 PM PDT
http://www.iw5edi.com/ham-radio/3777/the-vertical-bazooka-antenna



An article by VE3VDC LD Blake




Every radio amateur should build at least one antenna to prove to
themselves they can improvise in an emergency. One of the easiest and
quickest antennas to build is the Vertical Bazooka, which is made entirely
from coaxial cable.












Beyond being extremely easy to build, these antennas have several nice
features to recommend them:



Total cost under $10.00cdnNo coils needed.No ground radials.SWR under 2:1
across several megahertzCan be built as part of your feedlineCan be coiled
up and put in your car trunk.Performance like regular half-wave
antennas.Self-supporting versions are easily built.




The antenna itself is an off-center fed vertical dipole made by flipping an
electrical quarter wavelength of braid back over the outside of the coax.
The center lead of the coax forms one half of the dipole and the braid
forms the other. The resulting antenna has a low radiation pattern and an
impedance of 55 60 ohms.




One of the more interesting features is the braid itself. By folding an
electrical quarter wavelength of braid back over the insulated coax we are
forming both a dipole and a bazooka (sleeve) balun, a coaxial 1:1 balun
that greatly reduces feedline radiation. The braid side of the dipole ends
up considerably shorter than the top element because of the interaction
between the braid and the coax. The outer braid couples with the inner
braid to form the balun and is thus affected by the velocity factor of the
coax.




You can use the formulae in the diagram above to create Vertical Bazooka
dipoles for any frequency. But please notice the formulas shown will
deliberately start you off with the top section too long, so you will have
to trim it for the best SWR.




You can build a mobile emergency version of the Vertical Bazooka by
attaching a length of non-conductive cord (nylon line) to the top of the
antenna. With a weight on the free end of your cord, you can simply toss it
over any nearby support and hoist the antenna up into the air for use.




If you like you can also build a self-supporting version by sliding the
finished antenna into a length of Schedule 40 PVC plumbing pipe.



Building The Antenna



TypeVFRG-8 (poly)0.66RG-8 (foam)0.75RG-58 (poly)0.66RG-58
(foam)0.75RG-8X0.78RG-1740.66RG-2130.66RG-2140.66RG-2170.66RG-2180.66RG-3160.79LMR-1950.83LMR-2000.83LMR-2400.83LMR-4000.85LMR-5000.85LMR-6000.87Coax
Cables Velocity Factor




The only things you need to build a Vertical Bazooka are a length of coax,
a connector to fit your radio and a length of heat shrinkable tubing. All
these parts should be readily available from your local electronics parts
or ham radio stores.




The antenna is made by removing the outer covering of the coax for the
length of the top section, flipping the braid back over the outer covering
of the bottom section and then trimming the braid to length. Once you have
this done the task is that of trimming the upper section for best SWR.




The first step is to figure out the lengths of the various sections of the
antenna. You will need to know the velocity factor of the coax you are
using to get this right. A chart showing the VF of some of the more common
50 ohm cables is at the right.



Calculate the overall length of the antenna using the formula:
Length = 15000 / center band frequency = Centimetres
For example: On 2 metres this gives us 15000/146 = 102.8 cm.  Calculate the
length of the lower section:
Braid = (7500 / center band frequency) x VF = Centimetres
Eg. On 2 metres with RG-8x: (7500/146) x .78 = 40.1 cm.  To position the
feedpoint we calculate:
Top = Length Braid = Centimetres
Eg. On 2 metres with RG-8x: 102.8 40.1 = 62.7 cm




The first step in construction is to remove the outer jacket of the coax
from the top section.




Measure down the length you calculated for the top section and make a cut
around the coax jacket. Be very careful not to cut the braid. I find it
helpful to fold the coax over my finger, to put stress on the jacket and
cut very gently with a knife until the braid is visible in a small spot,
then rotate the coax and cut again, until the entire circle is cut.




Now cut along the coax making a lengthwise slit in the outer jacket until
you get to the end. Again be very careful not to slice the braid. Removing
this section of jacket will expose the braid as shown on the left.




Now comes the part everyone has trouble with. We need to flip the braid
back over the outer jacket of the coax.




Starting at the end of the coax work the braid lose from the insulation
over the inner conductor. This works like chineese handcuffs in that as you
push back the braid will expand a bit and become free to move along the
center insulator.




Once you have the braid free to move, simply grab it an inch or two above
the bottom of the exposed part and push it back over the coax in short
sections. Once you get the first section over, move down a bit and continue
with the next. Once you get it started, it will actually go quite easily.




On the right we see a close-up of the feedpoint of the antenna. This is
actually at the end of the outer jacket and was formed when you flipped the
braid over.




Now smooth the braid down tightly over the outer jacket and put a bit of
tape at the bottom to hold it in place.




The next step is to trim the braid to length. Measure down from the
feedpoint (the top of the braid) and put a tight band of tape around the
braid so that its bottom edge is where you want to cut. Now using fine wire
clippers, clip the braid to the final length you calculated.




On the left we see a shot of the antenna with the bottom section trimmed to
length. The formulas we used get the length of the braid very close to what
it needs to be and its not terribly critical so this would be a good time
to cut a length of heatshrink to cover the feedpoint and braid with a few
centimetres extra on each end. You can use a heat gun or blow drier to
tighten it into place.




If you are building an emergency version of the Vertical Bazooka you can
make the remaining length of coax (the feedline) almost any reasonable
length. If you are building a stand alone version you will want to leave
enough below the braid to attach a connector once its in its housing.




Finally install a connector appropriate to your radio or feedline. For
emergency versions that will be used with a HT you can use BNC or SMA
connectors. For use with a mobile radio, a PL259 will likely be needed. For
stand alone versions, a PL259 and a double female coupler, is probably the
best bet.




Thats it, the antenna is all ready for its tuneup







Tuning The Vertical Bazooka




The Vertical Bazooka is easily tuned by clipping short sections from the
end of the exposed center conductor of the antenna.




There are, however, some precautions you must observe. This is a dipole,
which means it has easily disturbed high impedance nodes at both the tip of
the top section and the bottom of the braid. It is an absolute necessity
that you get the antenna out into a clear area for tuning. If at all
possible, you want at least 1/2 wavelength of clear space all around the
antenna. More is better.




Probably the best strategy is to tape the antenna to the side of a length
of white PVC tubing so that you can stand it up during tests and tilt it
over to clip the top section. Alternatively you can temporarily attach a
non-conductive cord and hoist the antenna up and down from a tree branch or
clothesline, being careful of the clearance requirements.




Also please note, these clearance requirements include you as your body
capacitance can upset the readings. If youre building an emergency version
its no problem as you can simply play out the feedline and work from the
other end. If youre working on a self-supporting version you will need to
add a length of feedline to enable you to get back from it during tests.




Once you have the antenna in a testing position, take SWR readings at the
top and the bottom of the band youve cut the antenna for. Your first
readings will (hopefully) be terrible, with the bottom of the band reading
a little bit better than the top. This will tell you the antenna is too
long so youre set to begin trimming.




With the formulas used it is very unlikely the antenna will start out too
short.




You should note that you will not likely get a flat match or 1:1 SWR from
this antenna. Its feedpoint impedance varies from 55 to 60 ohms, so you
should be happy with anything under 1.5:1.




Assuming the antenna starts out too long:



Clip a few millimetres from the free end of the top section.Repeat your
band edge measurements.If the low end of the band is still better than the
high end, go to step 1.If the low end and high end readings are equal, you
are done.




As you are clipping, the SWR at the low end of the band may come down then
start to move back up. Thats ok, its just the antennas resonant frequency
passing the low end of the band. Once you complete the clip and test cycle
the resonant frequency should be near center band and you should have an
SWR curve that has equal readings at both band ends and a somewhat lower
reading in the center.



Deploying the Antenna




So, now that you have it all tuned up, the next step is deployment.




If you are working on an emergency coil up version of the antenna you will
want to add a good length of non-conductive cord, such as nylon twine or
light rope to the antenna with a small weight at the loose end. This will
let you spin the weight up on the end of the line and toss it over a tree
branch (or other handy hanging point) and then use the line to pull the
antenna up into operating position.




The best way to affix such a line is to solder a ring terminal or wire loop
onto the end of the top section of the antenna. The trick is to do this
without changing the length of the antenna.




Strip away the center leads insulation so that you can slide the ring
terminal on far enough to get the top of the ring even with the end of the
wire. Slide on the ring terminal and solder it into place, then trim the
wire out of the way of the ring terminals opening.





If youre working on a self-supporting version of the Vertical Bazooka you
will need a piece of white PVC schedule 40 plumbing pipe long enough to
make a radome with allowances for a mounting gap and attachment to a mast
pipe. This will need to be large enough to hold the coax but not so large
as to let it sag inside. 1/2 PVC will hold antennas made from RG-8x and
RG-58 nicely. For RG-8 or other large coaxes you can use 3/4.




The length of the radome can be a problem at lower frequencies. As the
length increases so does its tendency to sag or move about excessively in
the wind. About the practical limit with PVC radomes is 6 metres (54mhz).




The mounting gap cannot be ignored. You will need a gap between the bottom
of the antenna and the mounting structure at least the length of the braid
section if the antenna is not to be detuned by the mastpipe. Longer is
better, within reason.




There are several methods you can use to secure the antenna inside the
radome. My suggestion would be to attach the ring terminal, as above, then
drill a small hole at the top of the pipe and catch the ring in a wire-tie.
No matter what method you use you do have to take some precaution to make
sure its not going to find its way out.




And, of course, dont forget to put a weather cap on top of the radome.



Usage and Conclusions




Ive used the Vertical Bazooka both on my balcony and as a backpack antenna
on a recent day trip with my bicycle. I find its performance to be about
average; that is, what youd expect from a dipole. When hanging from a tree
branch it will open repeaters 25 and 30km away on my HTs medium power
setting. From my balcony that range is almost doubled.




The SWR of the antenna isnt bad. My 2 meter versions came in at about 1.3:1
on each end of the band, about 1.2:1 in the center.

The post The Vertical Bazooka Antenna appeared first on IW5EDI Simone -
Ham-Radio.


0 new messages