Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

how do I remove seat from Goldwing?

375 views
Skip to first unread message

weed...@webtv.net

unread,
Jul 6, 2002, 5:54:40 PM7/6/02
to
---GOD BLESS AMERICA---

sam

unread,
Jul 6, 2002, 9:55:26 PM7/6/02
to
not sure about 1984 but my 1999 you remove the grab handles and the seat comes out.
good luck, sammmm
 
 
 
 
I have a 1984 Goldwing Aspencade
that I have a new seat for. I can't figure
out how to remove the old seat. Can
anyone help with some information?
Thanks......

Larry St. Regis

unread,
Jul 7, 2002, 9:08:50 AM7/7/02
to
There are two bolts holding the seat on, about midway back along each side. Once those are removed, you should be able to slide the seat slightly forward, and then off.
 
Larry
--
 
'86 GL1200A
'86 XT350
'84 XV700
Brain damaged dog / Retarded cat
I have a 1984 Goldwing Aspencade
that I have a new seat for. I can't figure
out how to remove the old seat. Can
anyone help with some information?
Thanks......

---GOD BLESS AMERICA---

N329DF

unread,
Jul 7, 2002, 4:31:03 PM7/7/02
to
you have to remove the saddle bag lids, there are 2 bolts that need to be
removed, 1 on each side, slide the seat aft and lift on the backside of the
seat
Matt Gunsch,
A&P,IA,Private Pilot
Riding member of the Arizona Precision Motorcycle Drill Team
GWRRA,NRA,GOA

Wic

unread,
Jul 7, 2002, 8:58:38 PM7/7/02
to
On Sat, 6 Jul 2002 17:54:40 -0400 (EDT), weed...@webtv.net wrote:

>I have a 1984 Goldwing Aspencade
>that I have a new seat for. I can't figure
>out how to remove the old seat. Can
>anyone help with some information?
>Thanks......


Ask the owner for help.
Wic

johnb

unread,
Jul 13, 2002, 3:06:30 PM7/13/02
to
remove rear lugage box

remove both side bag covers

abt 1/2 way back from the front of the bags (under the seat) is a bolt
(alen head on mine - one on each side) remove them - keeping the
latching @ spring things in order please....

slide seat to the back and remove.... (lift up)

you MAY have to remove the old seat latcher/side slides and install on
the new seat... (I did so) lube as needed for ease of movement - trial
fit - bolt in and HAVE fun !!!!

BTW - while you are in there - have a look around at the wires and
things, CHECK and CLEAN what you can see.....

hope this helps -

John b

'83 Goldwing


Wic <Vic...@Victorland.com> wrote in message news:<btohiugm1gbtl0ka5...@4ax.com>...

0 new messages