Glide Pro stabilizing system

[Dean]

Set up a round on me Shirley while the wrenches among us check this
out.

Ran across this product in a forum discussion and it looks very
impressive. Takes a bit more time to install than one of the kits
mounting to the bottom of the bike, but I'm impressed enough to try
one. Their own fabricated front motor-mount is also part of the system
which consists of that and a redesigned swing arm shaft and bushings,

Anyone here have experience with the Glide Pro system?

There are real time 'how to' videos on their site. They do the rear in
about 45 minutes and the front in 1/2 an hour.

http://www.glide-pro.com/stabilizing-system/

Dean
EKIII
'06FLHR

"My choices in life were either to be a piano player in a whore house or a politician. And to tell the truth, there's hardly any difference!"

- Harry Truman

[Snag]

Dean wrote:
> Set up a round on me Shirley while the wrenches among us check this
> out.
>
> Ran across this product in a forum discussion and it looks very
> impressive. Takes a bit more time to install than one of the kits
> mounting to the bottom of the bike, but I'm impressed enough to try
> one. Their own fabricated front motor-mount is also part of the system
> which consists of that and a redesigned swing arm shaft and bushings,
>
> Anyone here have experience with the Glide Pro system?
>
> There are real time 'how to' videos on their site. They do the rear in
> about 45 minutes and the front in 1/2 an hour.
>
>
> http://www.glide-pro.com/stabilizing-system/
>
>
> Dean
> EKIII
> '06FLHR

I prefer the chromoly/aluminum bronze bushings that I have in my bike . If I
were to do it again , I'd make a set of sleeves to go in the rubbermounts
like we did for Old Crow's Tour Glide instead of the heim link under the
tranny like I did in mine though .
--
Snag
We spank Buells with our baggers ...

[nobody #1]

Dean wrote:
> Set up a round on me Shirley while the wrenches among us check this
> out.
>
> Ran across this product in a forum discussion and it looks very
> impressive. Takes a bit more time to install than one of the kits
> mounting to the bottom of the bike, but I'm impressed enough to try
> one. Their own fabricated front motor-mount is also part of the system
> which consists of that and a redesigned swing arm shaft and bushings,
>
> Anyone here have experience with the Glide Pro system?
>
> There are real time 'how to' videos on their site. They do the rear in
> about 45 minutes and the front in 1/2 an hour.
>
>
> http://www.glide-pro.com/stabilizing-system/
>
>
>

Urethane is pretty stiff it seems like the mount would make the bike
vibrate a lot more, but I could be wrong.

nobody #1

[Old Crow]

"Snag" <snag...@comcast.net> wrote in message
news:JLIKm.19474$X01....@newsfe07.iad...

I'm not so sure we were spanking the Buell, I'm thinkin' we were spankin'
the rider.

--
Old Crow
'82 FLTC(P) 'Mistress Pearl'
'87 FLTC 'Fugly'
'61 F-100
BS#133, SENS, TOMKAT, SLOB#13, MAMBM