97 RoadKing want louder and deeper exhaust????
Jim
on Sampson's turnouts and thought that it would be the sound I was
looking for but it's really not!! It's not too bad but the other day I
was out with this babe that had an 883 and had the Harley Davidson pipes
on it (they weren't the stock pipes) and that thing sounded badder than
my big twin!!! What's the deal with that???? You could definitly hear
hers and mine was a more muffled sound. I have been hearing but am not
sure yet that if you have fuel injection that you cannot get that low
and loud sound that I am looking for is this true>????? What did I
do????? Oh no!!! I have the stock (slip on's) pipes that came with it
and was thinking about putting them on and drilling out the baffles bit
by bit until I get to the sound I am looking for if I can. Maybe take
them right out???? Any thoughts on this subject???? E-mail to me if
you can. My bike is pictured at the link below if you would like to see
it under "pictures" Nice looker just want her LOUDER!!!!!!! Jim
Concord,NH
FLHRI Vrooooooooooooooooom...........
--
Visit my Web Page at: http://people.ne.mediaone.net/jim43
There's a lot to do there so have fun ! Vrooooooom......
Tom K. 1996 FLHTC
set for my 96 FLHTC and like them much better that the Cycle Shack slip
ons I was running. It will be some work but you will like the result.
Tom 1996 FLHTC
Jim wrote in message <36FE48D6...@mediaone.net>...
Patrick Zambori
> Hey all, I have a 97 FLHRI and when I bought it had stock pipes. I put
> on Sampson's turnouts and thought that it would be the sound I was
> looking for but it's really not!! It's not too bad but the other day I
> was out with this babe that had an 883 and had the Harley Davidson pipes
> on it (they weren't the stock pipes) and that thing sounded badder than
> my big twin!!! What's the deal with that???? You could definitly hear
> hers and mine was a more muffled sound. I have been hearing but am not
> sure yet that if you have fuel injection that you cannot get that low
> and loud sound that I am looking for is this true>????? What did I
> do????? Oh no!!! I have the stock (slip on's) pipes that came with it
> and was thinking about putting them on and drilling out the baffles bit
> by bit until I get to the sound I am looking for if I can. Maybe take
> them right out???? Any thoughts on this subject???? E-mail to me if
> you can. My bike is pictured at the link below if you would like to see
> it under "pictures" Nice looker just want her LOUDER!!!!!!! Jim
>
> Concord,NH
> FLHRI Vrooooooooooooooooom...........
> --
> Visit my Web Page at: http://people.ne.mediaone.net/jim43
> There's a lot to do there so have fun ! Vrooooooom......
Loud and deep? Thunderheader. Patrick
--
---------------------------------------------------------------
Remove *nospam* to reply
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com (need Javascript on)
My site: http://www.execpc.com/~patrickz/patricksite.htm
1999 FLHT (road king to be) 1966 HD Sprint Model H
* wrench to ride, ride to live, live to wrench *
---------------------------------------------------------------
Alan Gideon
exhaust????
on Sampson's turnouts and thought that it would be the sound I was
looking for but it's really not!! It's not too bad but the other day I
was out with this babe that had an 883 and had the Harley Davidson pipes
on it (they weren't the stock pipes) and that thing sounded badder than
my big twin!!! What's the deal with that???? You could definitly hear
hers and mine was a more muffled sound. I have been hearing but am not
sure yet that if you have fuel injection that you cannot get that low
and loud sound that I am looking for is this true>????? What did I
do????? Oh no!!! I have the stock (slip on's) pipes that came with it
and was thinking about putting them on and drilling out the baffles bit
by bit until I get to the sound I am looking for if I can. Maybe take
them right out???? Any thoughts on this subject???? E-mail to me if
you can. My bike is pictured at the link below if you would like to see
it under "pictures" Nice looker just want her LOUDER!!!!!!! Jim
Concord,NH
FLHRI Vrooooooooooooooooom...........
--
Visit my Web Page at: http://people.ne.mediaone.net/jim43 There's a lot
to do there so have fun ! Vrooooooom......
It's true Jim the fueler's sound different, also a Harley mechanic told
me there is something different inside the engine, I can't remember what
he said though...Roadstar&HarleyDavidson...Alan.
1skankho
and a Thunderheader. The chrome on the Thunderheader isn't the greatest as
you've probably heard but the performance is there and the sound is - oh,
so sweet. Get one. You won't regret it.
Drag pipes may sound bad but hang around the dyno's during Bike Week and
you'll see that loudest isn't the bestest.
Steve-O
In article <36FE48D6...@mediaone.net>, Jim <ji...@mediaone.net> wrote:
Hey all, I have a 97 FLHRI and when I bought it had stock pipes. I put
on Sampson's turnouts and thought that it would be the sound I was
looking for but it's really not!! It's not too bad but the other day I
was out with this babe that had an 883 and had the Harley Davidson pipes
on it (they weren't the stock pipes) and that thing sounded badder than
my big twin!!! What's the deal with that???? You could definitly hear
hers and mine was a more muffled sound. I have been hearing but am not
sure yet that if you have fuel injection that you cannot get that low
and loud sound that I am looking for is this true>????? What did I
do????? Oh no!!! I have the stock (slip on's) pipes that came with it
and was thinking about putting them on and drilling out the baffles bit
by bit until I get to the sound I am looking for if I can. Maybe take
them right out???? Any thoughts on this subject???? E-mail to me if
you can. My bike is pictured at the link below if you would like to see
it under "pictures" Nice looker just want her LOUDER!!!!!!! Jim
Concord,NH
FLHRI Vrooooooooooooooooom...........
--
Visit my Web Page at: http://people.ne.mediaone.net/jim43
There's a lot to do there so have fun ! Vrooooooom......
To get random signatures put text files into a folder called ³Random Signatures² into your Preferences folder.
DMartin602
>on Sampson's turnouts and thought that it would be the sound I was
>looking for but it's really not!! It's not too bad but the other day I
>was out with this babe that had an 883 and had the Harley Davidson pipes
>on it (they weren't the stock pipes) and that thing sounded badder than
>my big twin!!! What's the deal with that???? You could definitly hear
>hers and mine was a more muffled sound. I have been hearing but am not
>sure yet that if you have fuel injection that you cannot get that low
>and loud sound that I am looking for is this true>????? What did I
>do????? Oh no!!! I have the stock (slip on's) pipes that came with it
>and was thinking about putting them on and drilling out the baffles bit
>by bit until I get to the sound I am looking for if I can. Maybe take
>them right out???? Any thoughts on this subject???? E-mail to me if
>you can. My bike is pictured at the link below if you would like to see
>it under "pictures" Nice looker just want her LOUDER!!!!!!! Jim
>
Jim, I Had a '96FLHRI, I ran Sampson true dual's(it eliminates the crossover)
with 2" staight slip on's and a 1 3/4" I.D. louvered baffle. I had to upgrade
the ignition to an ajustable setup(from HD) to compensate for the flow. Just
like a carberated bike. It gave me deep sound your looking. I also upgraded the
cam to a EV27 for performance(this is a good cam for road king, it starts
pulling at 1500RPM.
Dave
IBEW LU640
Ride Hard,Live Free
SteevenB
>Jim wrote:
><snip>
Nice looker just want her LOUDER!!!!!!! Jim
>>>> Concord,NH
>> FLHRI Vrooooooooooooooooom...........
>Loud and deep? Thunderheader. Patrick
yep - i have to agree with Patrick - they sure as hell are LOUD and deep
if thats what ya gotta heve - they will do the trick alright
SteevenB
#43(tm)
89" 1986 fxrs-sp
1992 flhtc
john
>
> Hey all, I have a 97 FLHRI and when I bought it had stock pipes. I put
> on Sampson's turnouts and thought that it would be the sound I was
> looking for but it's really not!! It's not too bad but the other day I
> was out with this babe that had an 883 and had the Harley Davidson pipes
> on it (they weren't the stock pipes) and that thing sounded badder than
> my big twin!!! What's the deal with that???? You could definitly hear
> hers and mine was a more muffled sound. I have been hearing but am not
> sure yet that if you have fuel injection that you cannot get that low
> and loud sound that I am looking for is this true>????? What did I
> do????? Oh no!!! I have the stock (slip on's) pipes that came with it
> and was thinking about putting them on and drilling out the baffles bit
> by bit until I get to the sound I am looking for if I can. Maybe take
> them right out???? Any thoughts on this subject???? E-mail to me if
> you can. My bike is pictured at the link below if you would like to see
>
> Concord,NH
> FLHRI Vrooooooooooooooooom...........
> --
> Visit my Web Page at: http://people.ne.mediaone.net/jim43
> There's a lot to do there so have fun ! Vrooooooom......
twin cam. Nice deep rumble and first class finish. Did the Stage 1 air
cleaner and EFI module too.
John
mo
>
just want her LOUDER!!!!!!! Jim
>
why fer? dont you dig a powerful purr over blatt ?
i do, my next bike will be a touring geezer-glide thats nice & muffled
(i think)
my FXR has stock exhaust with the baffles sawed out.
its semi-muffled till ya get on it.
mo
ge...@telusplanet.net
twist on the loudhandle. Not back just cruising. Other bros have tried
Bartels slipons. Not bad sound but I don't like to the big end look of
them. I tried drilling out the stock decker mufflers, just ended up
sounding more like a big air compressor to me. The Bub pipes also made
some power confirmed from a dyno test done on my FLHR. 70 horsepower,
80 torque. With Headquarters boltin cam, Dyna ignition module, Mikuni
42 carb.
Gene
On Sun, 28 Mar 1999 19:16:55 -0600 (CST), allynn1...@webtv.net
(Alan Gideon) wrote:
>From: ji...@mediaone.net (Jim) 97 RoadKing want louder and deeper
>exhaust????
>Hey all, I have a 97 FLHRI and when I bought it had stock pipes. I put
>on Sampson's turnouts and thought that it would be the sound I was
>looking for but it's really not!! It's not too bad but the other day I
>was out with this babe that had an 883 and had the Harley Davidson pipes
>on it (they weren't the stock pipes) and that thing sounded badder than
>my big twin!!! What's the deal with that???? You could definitly hear
>hers and mine was a more muffled sound. I have been hearing but am not
>sure yet that if you have fuel injection that you cannot get that low
>and loud sound that I am looking for is this true>????? What did I
>do????? Oh no!!! I have the stock (slip on's) pipes that came with it
>and was thinking about putting them on and drilling out the baffles bit
>by bit until I get to the sound I am looking for if I can. Maybe take
>them right out???? Any thoughts on this subject???? =A0 E-mail to me if
>you can. My bike is pictured at the link below if you would like to see
>it under "pictures" Nice looker just want her LOUDER!!!!!!! Jim
>Concord,NH
>FLHRI Vrooooooooooooooooom...........
>--
>Visit my Web Page at: http://people.ne.mediaone.net/jim43 There's a lot
>to do there so have fun ! Vrooooooom......
Stuart M. Sanders
Screamen Eagle mufflers put on in there place, now you also need to have
your carb rejetted. On a Road King that could be a touchy subject. That is
if your is fuel injected. Oh the Harley Davidson Screamen Eagle Mufflers
are $99.00 plus or minus $20.00. They also give your bike better
performance.
Jim wrote:
> Hey all, I have a 97 FLHRI and when I bought it had stock pipes. I put
> on Sampson's turnouts and thought that it would be the sound I was
> looking for but it's really not!! It's not too bad but the other day I
> was out with this babe that had an 883 and had the Harley Davidson pipes
> on it (they weren't the stock pipes) and that thing sounded badder than
> my big twin!!! What's the deal with that???? You could definitly hear
> hers and mine was a more muffled sound. I have been hearing but am not
> sure yet that if you have fuel injection that you cannot get that low
> and loud sound that I am looking for is this true>????? What did I
> do????? Oh no!!! I have the stock (slip on's) pipes that came with it
> and was thinking about putting them on and drilling out the baffles bit
> by bit until I get to the sound I am looking for if I can. Maybe take
> them right out???? Any thoughts on this subject???? E-mail to me if
> you can. My bike is pictured at the link below if you would like to see
> it under "pictures" Nice looker just want her LOUDER!!!!!!! Jim
>
> Concord,NH
> FLHRI Vrooooooooooooooooom...........
> --
> Visit my Web Page at: http://people.ne.mediaone.net/jim43
> There's a lot to do there so have fun ! Vrooooooom......
--
Stus