Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
TECH:Double Dragon picture size
0 views
Skip to first unread message
caius
Mar 5, 2002, 8:33:31 AM3/5/02
to
Hi people,
I recently bought a Double Dragon PCB (bootleg) and I use it with the
jamma test rig I have built.The board works fine,the only problem is
the picture size,it doesn't fit into the television screen and it's
not centered well.
Since my television doesn't have external controls for that (It
doesn't have neither a service mode to enter it..) ,how can I adjust
the picture size without open the television itself ?
I recently bought a Double Dragon PCB (bootleg) and I use it with the
jamma test rig I have built.The board works fine,the only problem is
the picture size,it doesn't fit into the television screen and it's
not centered well.
Since my television doesn't have external controls for that (It
doesn't have neither a service mode to enter it..) ,how can I adjust
the picture size without open the television itself ?
By the way, to adjusting the RGB colors ,I put on my jamma rig
three potentiometers of 1k ohm and it works very well. So I'm
wondering if It could be done the same or similar thing to adjust the
picture size...is it possible?
Thanks in advance
0 new messages