Wiring/pinout for point blank 2

[_NathanK_]

hi Guys,

just got a pb2 board, but there is 0 wiring and i cant work out how to
hook it up. The manual is very confusing since it doesn't reference any
of jumpers on board directly, it only talks about the their own
internal wiring.

Does anyone have any diagrams on how to wire this up for a jamma cab?
i've seen:
http://www.ionpool.net/arcade/namco/pointblank_to_regular_happ_guns.pdf

but it doesnt show how to hook up the recoil solenoids etc.

Would be massivley appreciative if someone has this info.

-nat

[_NathanK_]

Well, worked it out, i was stumped on how to hook up the triggers...
but got it running in the end... for the sake of some other poor
bugger having to work this out, i'll post it for people googling..

Look for J3 on the second board, (manual has this too, just not clear)
pin out is such:

1 Not used
2 Not used
3 Recoil Solenoid - Gun 1
4 Lamp 1
5 Sensor - Gun 1
6 GND
7 Recoil Solenoid - Gun 2
8 Lamp 2
9 Sensor - Gun 2
10 Not used

Then the triggers:

22 Parts Side Trigger - Gun1
22 Solder Side Trigger - Gun 2

hope this helps some people,

-nat