2019 at 11:02:11 PM UTC-6, John Robertson wrote: > On 2019/04/16 7:08 pm, Troy wrote: > > On Monday, April 15, 2019 at 11:16:17 PM UTC-6, John Robertson wrote: > >>

29, 11:36 am, bigdrillcar wrote: > Hey Guys, > > I have decided to sell myBlackKnightproject pin. I bought it from > a fellow RGPer at the start of the year. Spent a few months

transmitting voltage up in the opto area. You most likely have a problem that'll come to bite you eventually up there. I'd take both DC and AC readings on U30 pin 1. Let's

resolved their knock this way when I did the write-up. Looks like I recalled correctly. Edward Cheung CARGPB26 On Feb 20, 10:49 pm, "Don H." wrote: > Very interesting

On Jun 11, 6:03 pm, Woz wrote: > On Jun 10, 1:35 pm, Hunty wrote: > > > > > On Jun 10, 10:59 am, Woz wrote: > > > > Thanks for the kind words guys. > > >

supposed to knock 2 or 3 times indicating a > bad switch. A single knock is just a screwy system 11 issue. My Dr Dude > does this once in a while but not all the time. It seems to only happen

4, 11:28 am, Karl M wrote: > On Apr 4, 12:13 pm, Bill wrote: > > > > > > > On Apr 4, 9:31 am, Karl M wrote: > > > > I'm getting ready to buy a new display

On Dec 11, 9:46 am, seymour-shabow wrote: > azpinlawyer wrote: > > > My issues with the "classic" Bally SS games--Centaur, Fathom, etc., is > > that there's

On Nov 11, 3:30 pm, AL wrote: > On Nov 11, 8:46 am, captkirk wrote: > > > > > > > On Nov 10, 7:31 pm, Steve Charland wrote: > > > > Should read "Nope

to clean up loose solder splashes and specks after using the vacuum tool. It's also good for helping the solder sucker if there's a large amount of solder on the top of the PCB

some folded up paper behind the two graveyard targets surrounding > the swamp entrance. They keep bending back, which causes the ball to get > airborne off of them and break things

then manually knock each target down. Game should report a switch closure for each target dropped. If not, then you probably have an opto problem where the opto switch on the PC board

common in System 11 games, but I wouldn't attribute it to *just* the 18kuf filter cap. I've done a LOT of board swapping, chip replacing, grounding, isolating, resoldering

I fired up the system with the solenoid power disconnected and went around pushing, nudging, etc on each of the connectors and socketed chips. When I pushed on the CPU, the system would

picked it up and it's not on >the threads that I have access to. Thanks in advance. Here you go... From: rusjensen@aol.com (RUS JENSEN) Newsgroups: rec.games.pinball Subject

on lining up shots on the playfield. - Finally remembered to update the "Multiball" section with the info about Data East and the use of the word -------------------- Cut

Flipper Passing 11: Miscellaneous Techie Stuff 11.1: Of Flippers and Men 11.2: Time for some Maintenance 11.3: ROM revisions 12: A Final Word ***** Section 1: Definitions ***** - "

date: 11/6/93 Compiled by: Dave Hollinsworth (hlsw_ltd@uhura.cc.rochester.edu) If you have any corrections, additions, or comments, please send 'em my way! You could join

Flipper Passing 11: Miscellaneous Techie Stuff 11.1: Of Flippers and Men 11.2: Time for some Maintenance 12: A Final Word ***** Section 1: Definitions (or, "Speak Like a Pro"