Hi all. My TAF restoration is getting closer all the time, and I just completed the switch harness

Swapping the PF on my game, & go figure my phone crashes & loses all the pics I took pre swap

#A1363 staple lamp bracket 0.66 2) #A2913 laydown bracket 0.70 8) #A2915 3/4 playfield lamp bracket 0.70 40) #A2916 1 1/8 lamp Bracket 0.79 20) BLY-PostCap White acorn nuts 0.17 30)

Finally geting around to swapping in my Black Knight playfield from CPR . I was wondering what people

to installing pop bumper wires and ground braid I've used > > the stapler to recover boat seats and trailer bunks and I just got it > > this Summer. Anything the old hand

Around > pop bumpers(3). The question I have has to do with the light inside it > it looks like the light socket is soldered to some metal strips on the > underside of the PF. Is

are > pop bumper light sockets, which every designer used. oh, you wanna > change a socket? assuming you can get to it from the top, all you have > to do is take off the easy-to-

I have to switch out the pop bumper bodies on my Congo as they are all broken badly. Never done this

pull as staple or > > > two to make this happen > > > Now, unsolder the light socket. > > > Push the two free tails towards each other. You should be free on the

contact the bumper cap when it's together. -- -cody -- "calvin12" wrote in message news:3f62a0fd-665d-4e92-951f-c747be5b147e@d8g2000yqf.googlegroups.com

of the pop bumpers not working? On one of > > the other two pop bumpers that are working the bulb is not? I was not > > sure of the wiring on the pop bumpers from my old pf since I

on the pop bumper holes....they are slightly smaller than > the plastic assemblies that go in there. Again, the round sanding drum > on a dremel worked fine, running it around

I know staples and staplers are available, but I am too cheap to buy one, and I don't do all that

I was finishing up my pop bumper rebuild as part of my Fish Tales restoration. Everything is stapled

I got my bumper skirts and lamp sockets today and I'm attempting reassembly. I'm assuming the

I have a IPB TAF playfield on order and to prepare for this swap/restoration I have googled a fair

Hey guys, I just had my first fun filled experience with removing and replacing pop bumpers on my MM.

ok, so I finally took some pictures of my Fathom Playfield Swap. New Drops, Pops, Plastics, New

staples on pop bumber restoration... I debated for > about a week an searched for alternatives to the compressor/long nose > staple gun method including trying to stamp in the

I am in the process of a playfield swap on my AFM. The operator hacked in some pop bumper lamp

was to staple lamp sockets directly > into the bottom of the playfield should be fined.) Luckily some of > her innards were given away and transplanted into other games to save

Someone has probably thought of this before, but I figure I'd put this out anyway. One of the

the entire pop bumper assembly > > slides right out. > > Oh, also, maybe he has Gottliebs....... > > -scott CARGPB#29 Well, I took them out last night and the staples

If so, would a common T-50 size staple be OK? I know it's a little bigger than factory size. I

of his staple removers. stevebo On Sun, 28 Oct 2007 19:08:09 -0700, pincredible wrote: >On Oct 28, 8:55 pm, Taylor-VA wrote: >> On Oct 28, 9:15 pm, "dinot...@yahoo.

Tonight I spent an extremely frustrating nearly 2 hours repairing 2 pop bumpers on a WPC-95 game that

), staple remover (for underside of pop bumpers), a hammer with a nylon head (for when stuff pisses me off), Qtips, pipe cleaners, alcohol, Mean Green, Bleche White (for cleaning the

Happy Friday guys - Gonna be doing a KISS pf swap soon, and have reviewed every post I can find and

for the pop bumpers. > > Use 444 bulbs as they are a pain to change. > > You will need to staple the leads under the playfield, and solder them > to common points. > >

Hurricane does not get a lot of love on the group, but I quite like mine and did this retrofit to it.