TECH - Demo Man - switches work, solenoids work, game wont start

[pinp...@gmail.com]

I was cleaning a demo man and now the a game wont start. On free play. Checked all the switches in the switch edge test and start switch works fine. tested all solenoids and they work fine. Is this a fuse somewhere causing the problem?

Thanks

[Borygard]

Make sure all the balls are in the game and lined up properly in the
trough.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
314-766-4587

[pinp...@gmail.com]

Yes, all the balls are in the game.

[psk445]

Coin door closed? Are the 2 coin door switches that tell the game the
door is closed working correctly?

[rodfone]

Had the same problem on mine try reseating the cpu to mpu ribbon cable
that solved my problem


--
rodfone
This USENET post sent from http://rgparchive.com

[action76]

My DM had this behavior before. I believe mine had something to do with
the claw alignment. I could go into claw test menu and move the claw
left then move it right, back out of the service menu and you could
start a game again. I tinkered with the claw and finally got the
problem to go away. Not sure if it helps but thought I would mention
it.


--
action76

[pinp...@gmail.com]

All the obvious were done, coin door closed, two high power safety's depressed. Nothing. I was cleaning the claw optos...I wonder if that did it. I cant understand why though?

[pincredible]

Try a factory reset.

[jle...@gmail.com]

Fixed, it was a fuse