Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Pop Bumper Light Wiring on EBD
23 views
Skip to first unread message
rob046
Feb 13, 2013, 4:31:52 AM2/13/13
to
Swapping the PF on my game, & go figure my phone crashes & loses all the pics I took pre swap, just awful timing on that bad luck! Looks like I might be able to find my way anyways, so far so good, but I'm not sure where the bumper lamp wires need to go to, at least not 100% sure. If anybody has a pic of this area, or knows of any tear-down pics of EBD in general it could help me out.
Thanks.
Thanks.
cody chunn
Feb 13, 2013, 8:38:48 PM2/13/13
to
No pics, and I have an LE, but my socket wires are soldered to "dummy" lugs
on the stack with the switch lugs. The lugs closer to the playfield.
-cody
CARGPB4
"rob046" wrote in message
news:32b9e56c-b51b-4ee3...@googlegroups.com...
on the stack with the switch lugs. The lugs closer to the playfield.
-cody
CARGPB4
"rob046" wrote in message
news:32b9e56c-b51b-4ee3...@googlegroups.com...
Mike Gervasi
Feb 13, 2013, 10:09:55 PM2/13/13
to
On Wednesday, February 13, 2013 4:31:52 AM UTC-5, rob046 wrote:
> Swapping the PF on my game, & go figure my phone crashes & loses all the pics I took pre swap, just awful timing on that bad luck! Looks like I might be able to find my way anyways, so far so good, but I'm not sure where the bumper lamp wires need to go to, at least not 100% sure. If anybody has a pic of this area, or knows of any tear-down pics of EBD in general it could help me out.
>
> Thanks.
Dude..this question was timed perfectly. I upgraded my iphone and didn't have the pics saved. JUST got to the pop sockets and wondered the same thing. I assumed based off IPDB pics it went to the lower left and right lugs of the spoon stacks but wasn't 100% sure.
> Swapping the PF on my game, & go figure my phone crashes & loses all the pics I took pre swap, just awful timing on that bad luck! Looks like I might be able to find my way anyways, so far so good, but I'm not sure where the bumper lamp wires need to go to, at least not 100% sure. If anybody has a pic of this area, or knows of any tear-down pics of EBD in general it could help me out.
>
> Thanks.
Guess we both know now.
BTW did you happen to have one lamp socket at the end of a string on the upper left where there was no hole drilled for it?
I'm going to an IPB repro and I'm finding they all are missing that lamp hole.
rob046
Feb 14, 2013, 4:56:56 AM2/14/13
to
Also working with IPB. Ugh what a pain for my 1st swap with having to drill all those holes, but I think it worked out fine. Yeah that one lamp. This PF has a large hole up there near where the old hole should be. I was able to staple that lamp to the inside of that hole. Actually I think that is a slightly better placement for that lamp anyways.
0 new messages