Pics needed of AFM Backboard mods

[trrekman9]

Getting ready to install the translucent back board. Looking for ideas
for the lighting mods.

Thanks......Ken

[Taylor-VA]

Where do you get these?

I know that there were some pics on HEP. Might want to try there.
http://christopherhutchins.com/gallery/album16?page=10

[dsup...@aol.com]

I think Ken meant this backboard:
http://christopherhutchins.com/gallery/album52?page=7

I installed one of these for a friend on his AFM. I used pretty much
the same light pattern. It does look AWESOME when done!

Brian

[Taylor-VA]

Oh, never seen one. Looks very cool IMO.
-Taylor

[Kim]

Isn't that a PinBotz BB decal shown on Chris's site
or is it a photoshopped/modified one from TC or Chris's own design?

If available:
WTB 1 - please email

Kim

[Bryan Kelly]

I have no idea where Chris gets his from, but they are available from
Allen at TC.

http://www.treasure-cove.net/Backboard%20Decals.htm

You'll find them about 2/3 of the way down the page.

Bryan (CARGPB 14)
http://usergallery.myhomegameroom.com/gallery/bspins
Home of the EXECUTIVE Pin Footie http://www.pinfooties.com

[Christopher Hutchins]

The first one where the original wood backboard is used is actually a
plastic(2 parts) that you USED to be able to get from someone else. I had a
bunch of them but have run out for the most part save for maybe one I am
holding onto.
The other (translucent)could be had from Marc B. as made by Tom A(in
Germany I think) but these days I think Dan H.(Pinball Barn) is his
connection here now but even then I am not sure.
--
Christopher Hutchins
www.highendpins.com
"Kim" <cybe...@sbcglobal.net> wrote in message
news:1194899747.8...@o80g2000hse.googlegroups.com...

[Pinball Barn]

> The other (translucent)could be had from Marc B. as made by Tom A(in
> Germany I think) but these days I think Dan H.(Pinball Barn) is his
> connection here now but even then I am not sure.
> --

> Christopher Hutchinswww.highendpins.com"Kim" <cyberk...@sbcglobal.net> wrote in

Chris, you are correct!! I currently sell these for Tom Altenbach. I
have a few of these on my website if you would like to check them out.
They are under parts.

www.pinballbarn.com

Thanks!!

Dan Heatherly