info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
r Trek pinball
57 views
Skip to first unread message
tony c
Sep 21, 2021, 12:39:39 AM9/21/21
to
I am working on a star trek pinball. And when I apply power, it says F114 & F115 blow. Then it goes haywire and says row 1 thru row 8 grown shows. It won't let me into the test mode even won't let me turn down the volume. I need a little help here, besides replacing the fuse. where do I start?
Joseph 'Tony' Dziedzic
Sep 21, 2021, 11:40:01 AM9/21/21
to
On Tuesday, September 21, 2021 at 12:39:39 AM UTC-4, teampl...@gmail.com wrote:
> I am working on a star trek pinball. And when I apply power, it says F114 & F115 blow. Then it goes haywire and says row 1 thru row 8 grown shows. It won't let me into the test mode even won't let me turn down the volume. I need a little help here, besides replacing the fuse. where do I start?
Based on the reference to "F114 & F115" I'm ASSUMING this is a WPC-era Williams ST:TNG (helps to be specific).
> I am working on a star trek pinball. And when I apply power, it says F114 & F115 blow. Then it goes haywire and says row 1 thru row 8 grown shows. It won't let me into the test mode even won't let me turn down the volume. I need a little help here, besides replacing the fuse. where do I start?
Your best bet is to read through the troubleshooting steps at www.pinwiki.com, and then pop back here with specific questions if you run into issues.
Joseph "Tony" Dziedzic
0 new messages