Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Tech WPC driver board fuse blows upon power on.
2 views
Skip to first unread message
Jason Cross
Nov 21, 2009, 2:53:44 PM11/21/09
to
I just got this Addams today. There was no fuse in F115. Well thats
for sure a red flag for sure and I about knew what was going to happen
when I put one in and sure enough, the F115 fuse blows instantly upon
powering up the game. Goes into attract as it should and shows check
fuses F114 and F115 on display. What should I check here ?
for sure a red flag for sure and I about knew what was going to happen
when I put one in and sure enough, the F115 fuse blows instantly upon
powering up the game. Goes into attract as it should and shows check
fuses F114 and F115 on display. What should I check here ?
RobotronJohn
Nov 21, 2009, 2:56:32 PM11/21/09
to
Lloyd Olson
Nov 21, 2009, 4:11:10 PM11/21/09
to
F115 is 12 volt for your switch matrix so I'd suspect the bridge rectifier
for your 12 volts is shorted. LTG :)
for your 12 volts is shorted. LTG :)
"Jason Cross" <jmac...@msn.com> wrote in message
news:4791a236-743d-4a1d...@o13g2000vbl.googlegroups.com...
Borygard
Nov 21, 2009, 4:12:40 PM11/21/09
to
Jason, remove all the switch matrix connectors from the bottom of the
CPU (J205-J212) and see if the fuse still blows. If it doesn't you've
likely got something shorting to a switch somewhere in the game and a
CPU issue too because of it.
CPU (J205-J212) and see if the fuse still blows. If it doesn't you've
likely got something shorting to a switch somewhere in the game and a
CPU issue too because of it.
Rob Anthony
Pinball Classics
www.LockWhenLit.com
Quality Board Work - In Home Service
314-766-4587
Lloyd Olson
Nov 21, 2009, 4:16:42 PM11/21/09
to
Bridge rectifier 5 would be the one to check. LTG :)
"Lloyd Olson" <l...@ssbilliards.com> wrote in message
news:YaSdnQfeFNL2ypXW...@skypoint.com...
0 new messages