info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Williams / United Shuffle Alley Manual Needed Sys 3-7
176 views
Skip to first unread message
Paul
Aug 16, 2015, 1:31:10 PM8/16/15
to
I know not really pinball, but thought someone out there may have a scan of a manual. Searched for a while online and nothing really shows up :(
Looking for schematics mostly showing what transistors drive what. Pin reset motor keeps cycling from the time you turn it on and the relay isn't magnetized as I have read about in other posts.
Alleys from this era are:
Topaz
Taurus
King Tut
Omni
Pompeii
Aristocrat
Big Strike
and I am sure there are others I missed.
Any help would be greatly appreciated.
Paul
Looking for schematics mostly showing what transistors drive what. Pin reset motor keeps cycling from the time you turn it on and the relay isn't magnetized as I have read about in other posts.
Alleys from this era are:
Topaz
Taurus
King Tut
Omni
Pompeii
Aristocrat
Big Strike
and I am sure there are others I missed.
Any help would be greatly appreciated.
Paul
pinnut
Aug 16, 2015, 3:24:58 PM8/16/15
to
mike
Paul
Aug 16, 2015, 4:03:19 PM8/16/15
to
Thanks!
Bradley West
Nov 17, 2021, 6:39:42 PM11/17/21
to
Paul
Nov 17, 2021, 11:50:15 PM11/17/21
to
will poke around to see if I got something. Pretty sure I did.
Paul
jeffC
Nov 18, 2021, 9:55:21 AM11/18/21
to
On Wednesday, November 17, 2021 at 11:50:15 PM UTC-5, Paul wrote:
> On 11/17/2021 6:39 PM, Bradley West wrote:
> > On Sunday, August 16, 2015 at 4:03:19 PM UTC-4, Paul wrote:
> >> On Sunday, August 16, 2015 at 3:24:58 PM UTC-4, pinnut wrote:
> >>> On Sunday, August 16, 2015 at 1:31:10 PM UTC-4, Paul wrote:
> >>>> I know not really pinball, but thought someone out there may have a scan of a manual. Searched for a while online and nothing really shows up :(
> >>>>
> >>>> Looking for schematics mostly showing what transistors drive what. Pin reset motor keeps cycling from the time you turn it on and the relay isn't magnetized as I have read about in other posts.
> >>>>
> >>>> Alleys from this era are:
> >>>> Topaz
> >>>> Taurus
> >>>> King Tut
> >>>> Omni
> >>>> Pompeii
> >>>> Aristocrat
> >>>> Big Strike
> >>>> and I am sure there are others I missed.
> >>>>
> >>>> Any help would be greatly appreciated.
> >>>>
> >>>> Paul
> >>>
> >>> got something for ya, king tut. whats your email
> >>>
> >>> mike
> >> pefdude AT gmail dot com
> On 11/17/2021 6:39 PM, Bradley West wrote:
> > On Sunday, August 16, 2015 at 4:03:19 PM UTC-4, Paul wrote:
> >> On Sunday, August 16, 2015 at 3:24:58 PM UTC-4, pinnut wrote:
> >>> On Sunday, August 16, 2015 at 1:31:10 PM UTC-4, Paul wrote:
> >>>> I know not really pinball, but thought someone out there may have a scan of a manual. Searched for a while online and nothing really shows up :(
> >>>>
> >>>> Looking for schematics mostly showing what transistors drive what. Pin reset motor keeps cycling from the time you turn it on and the relay isn't magnetized as I have read about in other posts.
> >>>>
> >>>> Alleys from this era are:
> >>>> Topaz
> >>>> Taurus
> >>>> King Tut
> >>>> Omni
> >>>> Pompeii
> >>>> Aristocrat
> >>>> Big Strike
> >>>> and I am sure there are others I missed.
> >>>>
> >>>> Any help would be greatly appreciated.
> >>>>
> >>>> Paul
> >>>
> >>> got something for ya, king tut. whats your email
> >>>
> >>> mike
> >> Thanks!
> > I know this is old, but I am looking for an Omni Manual. but I would also take whatrever you have, so I can add it to my archive.
> >
> Wow, that was a few years ago. I think I did end up with something. I
> will poke around to see if I got something. Pretty sure I did.
>
> Paul
King Tut shuffle alley manual is here:
> > I know this is old, but I am looking for an Omni Manual. but I would also take whatrever you have, so I can add it to my archive.
> >
> Wow, that was a few years ago. I think I did end up with something. I
> will poke around to see if I got something. Pretty sure I did.
>
> Paul
https://www.progettosnaps.net/manuals/pdf/kingt_l1.pdf
pinworks
Nov 25, 2021, 3:09:40 PM11/25/21
to
1. Check the following contact points:
a. There is a relay mounted beside the motor. When the game is off, the points should be open. When the game is on and you are not
actually needing the pins reset, the points should be open and the relay should not be pulled in.
b. There is a set of points on a metal cam. The cam turns when the motor runs. There is a low spot on the cam. The points must
open when the cam reaches the low spot.
2. Check that the brake on the motor is moving in and out properly. If the motor runs all the time, turn the game off and inspect the brake. It should move in and out freely. (the brake is the little wheel inside the motor rotor) If it is stuck, use non flammable contact cleaner to loosen it up until it moves really freely.
3. If everything else looks good but you still have a problem, cut a small rectangle of cereal box cardboard so that it fits into the relay in step 1 a above. The cardboard goes between the coil and the plate that the coil operates.
The problem with the game I worked on was fixed with the small square of cardboard. The plate had started sticking to the coil. I am not
convinced it was a magnet field. I think something was binding in the mech, but I could not see anything. The cardboard decreased the amount of travel of the plate and the sticking stopped.
Good luck
pinworks
0 new messages