Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Getaway tunnel shot kicks out too hard
2 views
Skip to first unread message
jar155
Oct 4, 2009, 1:00:01 AM10/4/09
to
I just finished shopping out a Getaway and my tunnel shot kicks out so
hard it hits the right orbit metal guide and bounces right back into
the tunnel. It will keep doing this until I nudge as it kicks so as to
make it ricochet at a different angle and not right back into the
tunnel shot. Is there any way to decrease the strength of the kicker?
It didn't do this before I shopped it out.
hard it hits the right orbit metal guide and bounces right back into
the tunnel. It will keep doing this until I nudge as it kicks so as to
make it ricochet at a different angle and not right back into the
tunnel shot. Is there any way to decrease the strength of the kicker?
It didn't do this before I shopped it out.
Chris Hibler
Oct 4, 2009, 10:11:29 AM10/4/09
to
:-)
I had the same issue after I shopped my Getaway.
Rather than bending something or whatever, I replaced the AE-26-1200
coil with an AE-26-1500 coil. The -1500 coil is weaker and gets the
job done perfectly. Problem solved.
--
Chris Hibler - CARGPB #31
www.Team-EM.com
http://webpages.charter.net/chibler/Pinball/index.htm
I had the same issue after I shopped my Getaway.
Rather than bending something or whatever, I replaced the AE-26-1200
coil with an AE-26-1500 coil. The -1500 coil is weaker and gets the
job done perfectly. Problem solved.
--
Chris Hibler - CARGPB #31
www.Team-EM.com
http://webpages.charter.net/chibler/Pinball/index.htm
MrBally
Oct 4, 2009, 10:55:58 AM10/4/09
to
On Oct 4, 10:11 am, Chris Hibler <ch...@Team-EM.com> wrote:
> :-)
> I had the same issue after I shopped my Getaway.
> Rather than bending something or whatever, I replaced the AE-26-1200
> coil with an AE-26-1500 coil. The -1500 coil is weaker and gets the
> job done perfectly. Problem solved.
> --
> Chris Hibler - CARGPB #31www.Team-EM.comhttp://webpages.charter.net/chibler/Pinball/index.htm> :-)
> I had the same issue after I shopped my Getaway.
> Rather than bending something or whatever, I replaced the AE-26-1200
> coil with an AE-26-1500 coil. The -1500 coil is weaker and gets the
> job done perfectly. Problem solved.
> --
>
> On Oct 4, 12:00 am, jar155 <jar...@gmail.com> wrote:
>
>
>
> > I just finished shopping out a Getaway and my tunnel shot kicks out so
> > hard it hits the right orbit metal guide and bounces right back into
> > the tunnel. It will keep doing this until I nudge as it kicks so as to
> > make it ricochet at a different angle and not right back into the
> > tunnel shot. Is there any way to decrease the strength of the kicker?
>
> - Show quoted text -
Since the purists out there will scram that it's not stock, you may
want to change the coil wrapping to look like the proper coil!
Personally, I could care less what the coil wrapping looks like. I
stll have some Wico knock-off colis that don't have the Bally or
Williams logo. They work just fine for me.
Spbeyond
Oct 11, 2009, 12:51:31 PM10/11/09
to
Do you guys think a AE-26-1200 would be to weak to get the job done?
0 new messages