Anybody else has the same problem?
Thanks.
Denis
WSAETIMEDOUT - Error 10060
Question/Problem: Connection timed out.
Answer/Solution: A connect or send request failed because the connected
party did not properly respond after a period of time. (The timeout period
is dependent on the communication protocol.)
Check the obvious first: check that the destination address is a valid IP
address. If you used a hostname, did it resolve to the correct address? If
the hostname resolution uses a local host table, it is possible you resolved
to an obsolete address. Can you ping that hostname?
Do you have a router configured? Is the router up and running? (You can
check by pinging it, and then ping an address on the other side of it.) Try
a traceroute to the destination address to check that all the routers are
functioning.
Check your subnet mask. If you don't have the proper subnet mask, your
network system may treat a local address as a remote address (so it forwards
addresses on the local subnet to the router, rather than broadcasting an ARP
request locally), or vice versa.
"Denis Kholodar" <d...@duke.edu> wrote in message
news:aa29ec26.03122...@posting.google.com...
"Seymore Butts" <lin...@consultant.com> wrote in message news:<w%HGb.21696$n01....@bignews5.bellsouth.net>...