Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
pressure canner model 921 1\2
588 views
Skip to first unread message
murray...@gmail.com
Mar 30, 2014, 6:58:30 PM3/30/14
to
My son came across an All American pressure canner. The label says model number 921 1\2, yes one half. There is no jiggler, nor any place for it to mount. There is a guage and a device with a toggle that vents the canner. I ran it up to pressure and there appears to be no regulation method - it went to 19 psi and I shut it off.
I found the manual online for model 921, but it only references the use of the jiggler.
Does anyone know anything of this pot? Do you control the pressure just with heat? Can you retrofit a jiggler?
I've never used a pressure canner and would like to give it a try.
Thanks for any info you can provide.
I found the manual online for model 921, but it only references the use of the jiggler.
Does anyone know anything of this pot? Do you control the pressure just with heat? Can you retrofit a jiggler?
I've never used a pressure canner and would like to give it a try.
Thanks for any info you can provide.
Dave Balderstone
Mar 30, 2014, 9:03:36 PM3/30/14
to
In article <53ab1c4f-60fd-4864...@googlegroups.com>,
Try http://www.allamericancanner.com/contact.htm
Get the answer from the horse's mouth.
--
³Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness
sobered, but stupid lasts forever.² -- Aristophanes
Get the answer from the horse's mouth.
--
³Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness
sobered, but stupid lasts forever.² -- Aristophanes
George Shirley
Mar 30, 2014, 9:38:42 PM3/30/14
to
On 3/30/2014 5:58 PM, murray...@gmail.com wrote:
> 921 1\2,
Does it actually say 921 1/2 or is it 921.5? The 921 holds 21.5 quarts
of water when completely full. It has no jiggler, it has a pressure
gauge and a blow out device if it over pressures. The relief valve is
round and is attached to the lid. I would go online and look for a
complete manual if one didn't come with it.
Pressure canning is fairly easy but YOU MUST FOLLOW THE MANUAL'S RULES
at all times and you cannot walk away from the canner until it is off
the fire and cooling down.
All American is top of the line, I've been looking for one in thrift
stores to give me a second canner to help out my early sixties Sears
canner that I bought new. Here's the URL for the All American web site:
http://www.allamericancooker.com/allamerican921pressurecooker.htm
In addition the canning book, "So Easy to Preserve," is available at a
reasonable price from the University of Georgia food safety site, go
here: http://nchfp.uga.edu/
Hope this helps,
George Shirley
> 921 1\2,
Does it actually say 921 1/2 or is it 921.5? The 921 holds 21.5 quarts
of water when completely full. It has no jiggler, it has a pressure
gauge and a blow out device if it over pressures. The relief valve is
round and is attached to the lid. I would go online and look for a
complete manual if one didn't come with it.
Pressure canning is fairly easy but YOU MUST FOLLOW THE MANUAL'S RULES
at all times and you cannot walk away from the canner until it is off
the fire and cooling down.
All American is top of the line, I've been looking for one in thrift
stores to give me a second canner to help out my early sixties Sears
canner that I bought new. Here's the URL for the All American web site:
http://www.allamericancooker.com/allamerican921pressurecooker.htm
In addition the canning book, "So Easy to Preserve," is available at a
reasonable price from the University of Georgia food safety site, go
here: http://nchfp.uga.edu/
Hope this helps,
George Shirley
murray...@gmail.com
Mar 31, 2014, 1:11:38 PM3/31/14
to
> Try http://www.allamericancanner.com/contact.htm
>
>
>
> Get the answer from the horse's mouth.
>
>
>
> --
>
> ³Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness
>
> sobered, but stupid lasts forever.² -- Aristophanes
will do. Thanks
>
>
>
> Get the answer from the horse's mouth.
>
>
>
> --
>
> ³Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness
>
> sobered, but stupid lasts forever.² -- Aristophanes
murray...@gmail.com
Mar 31, 2014, 1:14:15 PM3/31/14
to
Thanks for the link and the tips.
Ross@home
Mar 31, 2014, 5:39:57 PM3/31/14
to
On Sun, 30 Mar 2014 15:58:30 -0700 (PDT), murray...@gmail.com
wrote:
Several years ago I managed to score an older All American Model 925
for a very low price. It was the type with the toggle valve and no
means for a pressure regulator weight.
I also have a Mirro pressure canner that uses the same pressure
regulator weight as the newer All American canners so I did some
retrofit checking on my 925.
I removed the vent pipe from the Mirro as well as the toggle valve
from the All American. The vent pipe from the Mirro had the same
thread as the toggle valve from the All American.
I ordered a new vent pipe (All American part number 69) and another
pressure regulator weight (All American part number 68).
The old toggle valve is now in a drawer somewhere in the workshop,
never to be found again.
My updated 925 with vent pipe and pressure regulator weight works like
a charm.
Just one caveat if you make this retrofit, there is no over pressure
safety plug on your 921 as the old toggle valve also acted as a safety
relief valve. With the vent pipe replacing the toggle valve, in the
event it becomes clogged, there is no over pressure safety relief
system. You will just have to keep a closer watch on the pressure
gauge.
Just did a quick search and both parts are available here:
http://www.allamericancanner.com/allamericanpressurecannerparts.htm
Ross.
Southern Ontario, Canada
wrote:
for a very low price. It was the type with the toggle valve and no
means for a pressure regulator weight.
I also have a Mirro pressure canner that uses the same pressure
regulator weight as the newer All American canners so I did some
retrofit checking on my 925.
I removed the vent pipe from the Mirro as well as the toggle valve
from the All American. The vent pipe from the Mirro had the same
thread as the toggle valve from the All American.
I ordered a new vent pipe (All American part number 69) and another
pressure regulator weight (All American part number 68).
The old toggle valve is now in a drawer somewhere in the workshop,
never to be found again.
My updated 925 with vent pipe and pressure regulator weight works like
a charm.
Just one caveat if you make this retrofit, there is no over pressure
safety plug on your 921 as the old toggle valve also acted as a safety
relief valve. With the vent pipe replacing the toggle valve, in the
event it becomes clogged, there is no over pressure safety relief
system. You will just have to keep a closer watch on the pressure
gauge.
Just did a quick search and both parts are available here:
http://www.allamericancanner.com/allamericanpressurecannerparts.htm
Ross.
Southern Ontario, Canada
murray...@gmail.com
Mar 31, 2014, 9:44:09 PM3/31/14
to
Thanks for the info and the heads up about the relief valve - don't think I'll tell my wife about that. She's already afraid of the thing.
There is another port on the lid. I thought it was the pressure relief valve. About a cm across with a 1 mm hole. The hole is blocked. ??
There is another port on the lid. I thought it was the pressure relief valve. About a cm across with a 1 mm hole. The hole is blocked. ??
0 new messages