Slightly OT BUT METAL CONTENT

[Steve B]

I want to make some leaders of a special nature for fishing. What I want to
make are pieces of wire, starting about 2" long, then the ends spiraled to
make two eyes with a straight piece in the middle. I would put a sinker on
the straight part before making the second eye.

What type of high strength wire would I use? I could probably get some old
guitar wires from a music shop and use the ones that don't have the
secondary spiral winding. Or is there just a simple type of commonly
available wire? Picture hanging wire is cheap, and it is kinda springy.
Mainly, I want it not to bend too much or be soft and break from flexing.

Steve

[RLM]

Google wire leader.

[Bill Noble]

fishing leader is sold in stores, it's made from stainless steel wire - at
least what I've seen here -

"Steve B" <desert...@fishmail.net> wrote in message
news:upic07-...@news.infowest.com...

[sta...@prolynx.com]

If you were here, I'd say hit Bass Pro and see what they have. I've
seen stainless leader there. See what Cabela's has for fishing
tackle.

The local train store has a lot of music wire, some stainless. Ditto
for one of the local hardware stores.

If you HAVE to do mail order, Brownell's sells music wire for spring
making, get some of the smaller stuff.

Stan

[Steve B]

"Bill Noble" <nob...@nowhere.invalid> wrote in message
news:hh07fu$p1d$1...@news.eternal-september.org...

> fishing leader is sold in stores, it's made from stainless steel wire - at
> least what I've seen here -

Are they sold with sliding sinkers?

Steve

[Steve B]

To all: I need to make some very short pieces because if I use too long of
a piece of anything, it tends to tangle with the lure when casting. Right
now, I use the twist on leads with the rubber centers. I want something
that will not kink the line or tangle when cast, or slide up from the lure.
I will attatch to the lure with a split ring.

HTH

Steve

[Steve B]

"RLM" <R...@127.0.0.1> wrote

> Google wire leader.

Do they come with a slip sinker?

[Don Foreman]

On Thu, 24 Dec 2009 08:51:45 -0800, "Steve B"

<desert...@fishmail.net> wrote:

http://tinyurl.com/ycdv854

There are crimp fittings useful in making eyes. The crimping pliers
are under 10 bux. Bass Pro, Cabela's, Gander Mountain, etc.

[RLM]

You buy the crimp on sleeves or ferules at the bait or sporting goods
store and make the leaders to your spec's. Add a sliding sinker, crimp
leader with loop at each end. Or put a swivel with clasp on one end.

http://www.castawaylakes.com/LeaderSleeves.html