WTT-30 taper & 40 Taper Drill tooling

Gunner Asch

unread,

Apr 3, 2010, 4:21:32 PM4/3/10

to

Im needing both a NMTB 30 and an NMTB 40 tool with a drill chuck (5/8'
prefered) attached. OR NMTB 30/40 tooling with Jacobs stub so I can
attach my own drill chucks.

Ive been running into some space limitations so need shorter tooling.

Ive got plenty of GOOD drill chucks and a few GOOD R8 drill chucks to
trade. Jacobs/Albrect/Rohm

Gunner

"First Law of Leftist Debate
The more you present a leftist with factual evidence
that is counter to his preconceived world view and the
more difficult it becomes for him to refute it without
losing face the chance of him calling you a racist, bigot,
homophobe approaches infinity.

This is despite the thread you are in having not mentioned
race or sexual preference in any way that is relevant to
the subject." Grey Ghost

DoN. Nichols

unread,

Apr 3, 2010, 10:05:32 PM4/3/10

to

On 2010-04-03, Gunner Asch <gunne...@gmail.com> wrote:
> Im needing both a NMTB 30 and an NMTB 40 tool with a drill chuck (5/8'
> prefered) attached. OR NMTB 30/40 tooling with Jacobs stub so I can
> attach my own drill chucks.
>
> Ive been running into some space limitations so need shorter tooling.

For the smaller sizes, at least, I've found the plain end mill
holders are shorter. Even for 5/8", I think that a 5/8" end mill holder
in either 30 Taper or 40 Taper would be shorter than a chuck on an
adaptor.

And the smaller DA collet chucks also would be shorter than an
arbor plus a Jacobs chuck, though the larger collet chucks would be
longer, of course.

Also -- do you have a 30-40 taper adaptor? I have one which
will allow the 30 taper tooling for the Bridgeport to work with my 40
taper Nichols horizontal -- I just needed to make a new drawbar for
those, since they expected a different drawbar thread.

> Ive got plenty of GOOD drill chucks and a few GOOD R8 drill chucks to
> trade. Jacobs/Albrect/Rohm

You could also try a Jacobs to straight shank in a 40 taper end
mill holder.

Good Luck,
DoN.

--
Email: <dnic...@d-and-d.com> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

Buerste

unread,

Apr 3, 2010, 10:44:20 PM4/3/10

to

"Gunner Asch" <gunne...@gmail.com> wrote in message
news:gf8fr5h4tld561aht...@4ax.com...

> Im needing both a NMTB 30 and an NMTB 40 tool with a drill chuck (5/8'
> prefered) attached. OR NMTB 30/40 tooling with Jacobs stub so I can
> attach my own drill chucks.
>
> Ive been running into some space limitations so need shorter tooling.
>
> Ive got plenty of GOOD drill chucks and a few GOOD R8 drill chucks to
> trade. Jacobs/Albrect/Rohm
>
> Gunner
>

E-mails to you are bouncing, you're mising some good jokes.

Gunner Asch

unread,

Apr 4, 2010, 1:54:46 AM4/4/10

to

On Sat, 3 Apr 2010 22:44:20 -0400, "Buerste" <bue...@buerste.com>
wrote:

evidently you didnt get my email changes

New/current email addys are:

gunnerasch AT hotmail.com
gunnerasch AT gmail.com

I had to let the lightspeed account go away. I simply couldnt afford it
any more. Hated to drop it..had it for 12 yrs.

Gunner

Cliff

unread,

Apr 4, 2010, 6:22:54 AM4/4/10

to

Knowing how he loves to lie ... perhaps he made one too many
death threats someplace to someone.
--
Cliff