ping: gunner, iggy & "all the regulars" - quick "what's this spoolgun/welder setup worth" type quest
dave
I'm peddling this welder, a CV miller "spoolmate 200" welder with the
"spoolmatic 1" gun. did quite a bit of 'detailing' on it (like it
matters, me can only hope). I've been asking $800, but unsure if that's
way high, "way low" or "just about right" for an *asking* price...
*SURE* appreciate if you guys would tell me what sum -you'd- be asking
for this setup if you were the seller :-)
or maybe tell me 'about what they usually go for, generally', or
something...*any*thing you tell me would be more than I know now...
you can gaze upon the thing here in ALL its' glory:
http://machines.2x.nu/miller_spoolmatic_1_spoolgun_and_miller_spoolmate_200_MIG_welder/
miller_spoolmatic_1_gun_and_spoolmate_200_Miller_MIG_welder
*thanks* guys
dave 'toolie'
Ignoramus14280
not unreasonable, but be ready to drop the price, as times are tough.
Yesterday I bought a Millermatic 251 with a bunch of welding wire,
solid and fluxcore, including a big spool of Monel, full owner gas
tank, mig gun, and also a Delta 17-700 3/4 HP drill press in like new
condition, all for $1,000. So it is hard to say how much I paid for
the Millermatic, as I bough it together with the drill press, maybe I
would say $850, but my point is that it is a buyer's market. I do
think that the guy who sold that stuff to me could have gotten more
elsewhere, but not outrageously more.
I would say that if not for $800, but for $600 you can sell it for
sure, but I would try selling it for $800 first.
This is all assuming it is 1 phase.
i
Gunner Asch
<ignoram...@NOSPAM.14280.invalid> wrote:
>Considering that it includes that spoolmatic gun, I think that $800 is
>not unreasonable, but be ready to drop the price, as times are tough.
>
>Yesterday I bought a Millermatic 251 with a bunch of welding wire,
>solid and fluxcore, including a big spool of Monel, full owner gas
>tank, mig gun, and also a Delta 17-700 3/4 HP drill press in like new
>condition, all for $1,000. So it is hard to say how much I paid for
>the Millermatic, as I bough it together with the drill press, maybe I
>would say $850, but my point is that it is a buyer's market. I do
>think that the guy who sold that stuff to me could have gotten more
>elsewhere, but not outrageously more.
>
>I would say that if not for $800, but for $600 you can sell it for
>sure, but I would try selling it for $800 first.
>
>This is all assuming it is 1 phase.
I concur with Iggy on this.
Gunner who has a nice! Airco PhaseArc 350 (3ph 300 amp mig) for sale and
might take $800
>
>i
>
>On 2009-10-05, dave <tool...@weirdstuffcox.net> wrote:
>> hey guys
>>
>> I'm peddling this welder, a CV miller "spoolmate 200" welder with the
>> "spoolmatic 1" gun. did quite a bit of 'detailing' on it (like it
>> matters, me can only hope). I've been asking $800, but unsure if that's
>> way high, "way low" or "just about right" for an *asking* price...
>>
>> *SURE* appreciate if you guys would tell me what sum -you'd- be asking
>> for this setup if you were the seller :-)
>>
>> or maybe tell me 'about what they usually go for, generally', or
>> something...*any*thing you tell me would be more than I know now...
>>
>> you can gaze upon the thing here in ALL its' glory:
>>
>> http://machines.2x.nu/miller_spoolmatic_1_spoolgun_and_miller_spoolmate_200_MIG_welder/
>> miller_spoolmatic_1_gun_and_spoolmate_200_Miller_MIG_welder
>>
>> *thanks* guys
>>
>> dave 'toolie'
>>
>>
>>
Political Correctness is a doctrine fostered by a delusional,
illogical liberal minority, and rabidly promoted by an
unscrupulous mainstream media, which holds forth the
proposition that it is entirely possible to pick up a turd by the clean end.
Larry Jaques
<tool...@weirdstuffcox.net> scrawled the following:
Dave just bought a new digital camera, didn't he? <bseg>
--
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all
progress depends on the unreasonable man.
-- George Bernard Shaw
dave
and thanks to you too gunner :-)
'preciate yer help :-)
Ignoramus14280 wrote:
> This is all assuming it is 1 phase.
yup, that's what it are :-)
>
>>
>> *thanks* guys
>>
>> dave 'toolie'
dave
>
> Dave just bought a new digital camera, didn't he? <bseg>
well, no. but, admittedly, maybe "a few too many" photos, ay?
I do tend to overdo it at times...
Larry Jaques
<tool...@weirdstuffcox.net> scrawled the following:
>Larry Jaques wrote:
Eighty seven for one welder? Yeah, maybe a couple too many.
<g>
--
Reading well is one of the great pleasures that solitude can afford you.
-- Harold Bloom, O Magazine, April 2003
Too_Many_Tools
> hey guys
>
> I'm peddling this welder, a CV miller "spoolmate 200" welder with the
> "spoolmatic 1" gun. did quite a bit of 'detailing' on it (like it
> matters, me can only hope). I've been asking $800, but unsure if that's
> way high, "way low" or "just about right" for an *asking* price...
>
> *SURE* appreciate if you guys would tell me what sum -you'd- be asking
> for this setup if you were the seller :-)
>
> or maybe tell me 'about what they usually go for, generally', or
> something...*any*thing you tell me would be more than I know now...
>
> you can gaze upon the thing here in ALL its' glory:
>
> miller_spoolmatic_1_gun_and_spoolmate_200_Miller_MIG_welder
>
> *thanks* guys
>
> dave 'toolie'
I bet it would bring more money if you paint it LINCOLN RED. ;<)
TMT
dave
thanks to all you guys for your comments and tips.
the spooler setup sold today "for the asking" to a local guy/cash
(so, maybe 87 pix -weren't- 'too many' ;-)
but, then again, one never knows...
toolie.