You do not have permission to delete messages in this group
Copy link
Report message
Sign in to report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to
Hello, I am in the process of building my first Odyssey lamp kit. A 14 inch tulip dome. All pieces cut and foiled - then I ordered a 4 inch ring and wheel. My issue is that the ring I ordered from Delphi is actually 4.5 inches and does not seat into the lamp mold. Is this a common problem and I should adjust my pattern or should I return the ring? I expected the sizing to be common.
Laurie
unread,
Dec 25, 2022, 12:01:13 AM12/25/22
Delete
You do not have permission to delete messages in this group
Copy link
Report message
Sign in to report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to
I'm sorry you're having this problem. I aways place the ring on the mold before working. But sinn certainly you are past that see how it fits on the mold then try to trim the top pieces. Possibly you can lift the pieces to fit around the ring. But before you do anything be sure that the dwheel & cap fit. If they don't, you have a bigger problem & should definitely call Delphi. Good luck & I hope this helps.