Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Where can I find Sea Ray specs?

892 views
Skip to first unread message

Denis Roy

unread,
May 20, 2004, 12:00:07 AM5/20/04
to
I bought a 1988 Sea Ray Seville. It's supposedly 17 foot but measuring down
one side, following the curve, I get 18 feet. I really need to know the
weight of this unit, with its factory installed 100 HP outboard, to know if
it's within the towing limits of my Venture van. I have been unable to find
this info on the net.
Anyone have any suggestions on where to get this info, other than stopping
at a roadside weigh scale and unhitching it on the scale?


--
Denis Roy
D. Roy Woodcraft
www.ideasinwood.com


Gould 0738

unread,
May 20, 2004, 12:35:28 AM5/20/04
to

Go to the Sea Ray website, and see what a similar new boat weighs. Add 20 to
25% to be safe, and then compare to your towing specs. Hopefully, you'll still
have some slack.

(LOA is measured down the centerline, not around the curve of the hull. Even
then, it's just approximate. I just wrote a review of a 49' Boat that's really
54' long)

Paul Schilter

unread,
May 20, 2004, 7:14:29 AM5/20/04
to
Denis,
Try here:
http://www.searay.com/index.asp?display=archives&tab=0&year=1988&folder2=26%20feet%20and%20below
Paul

"Denis Roy" <nos...@nospam.ca> wrote in message
news:b3Wqc.540747$Ig.109502@pd7tw2no...

Denis Roy

unread,
May 20, 2004, 11:57:35 AM5/20/04
to
Thanks for your suggestions. It never occurred to me to try Searay.com.
Duh!
They give dry weight of just over 1500 lbs. Although the 100 hp "searay"
motor is in the spec sheet, they don't say if that weight includes it. I
estimate the trailer to be another 500 lbs.

--
Denis Roy
D. Roy Woodcraft
www.ideasinwood.com

"Paul Schilter" <paulschilter@comcast,dot,net> wrote in message
news:2rOdnZ6CIpS...@giganews.com...
> Denis,
> Try here:
>
http://www.searay.com/index.asp?display=archives&tab=0&year=1988&folder2=26%

Dan Krueger

unread,
May 20, 2004, 7:59:47 PM5/20/04
to
Your van is rated for 3500# with the trailer package. The motor is about 350# -
I really doubt that is included in the dry weight in the spec sheets. The
trailer is probably close at 500#. Add 6# per gallon for fuel (120#) and
another 200# for "stuff" and you will probably arrive at number close to 2800#.

Looks safe to me.

Dan

Paul Schilter

unread,
May 20, 2004, 10:08:17 PM5/20/04
to
Denis,
You're welcome, it's one of the great things about Usenet, sharing info.
Paul

"Denis Roy" <nos...@nospam.ca> wrote in message

news:Pz4rc.514972$Pk3.44886@pd7tw1no...

Coff

unread,
May 21, 2004, 4:00:24 AM5/21/04
to
"Denis Roy" <nos...@nospam.ca> wrote in message news:<b3Wqc.540747$Ig.109502@pd7tw2no>...

> I bought a 1988 Sea Ray Seville. It's supposedly 17 foot but measuring down
> one side, following the curve, I get 18 feet. I really need to know the
> weight of this unit, with its factory installed 100 HP outboard, to know if
> it's within the towing limits of my Venture van. I have been unable to find
> this info on the net.
> Anyone have any suggestions on where to get this info, other than stopping
> at a roadside weigh scale and unhitching it on the scale?


I would take every boat I ever trailered, fill it with equipment and
fuel, and stop at my local truck stop out on the interstate (NOT the
Department of Transportation weigh scales). I would let the attendant
know that I wanted to drop the boat on the scale, pull away and get
the weight, hitch up and get the gross weight. It would cost me
$6.00, and the weight was ALWAYS significantly heavier that I had
anticipated.

Good luck.

Coff

Peggie Hall

unread,
May 21, 2004, 11:37:24 AM5/21/04
to
Denis Roy wrote:
> I bought a 1988 Sea Ray Seville. It's supposedly 17 foot but measuring down
> one side, following the curve, I get 18 feet.

That's not how a boat length is measured. The legal LOA ("length
overall") is straight line measured over the centerline from the
foremost point on the hull (not the deck), excluding any pulpits or
bumpkins, to the aftmost point on the hull, excluding any motormounts or
other attachments.

Dry weight does not include outboard motors or outdrives--but does
include inboard engine(s), electronics, fuel, water, toilets, holding
tanks, generators, or anything else that's not part of the "base" boat.
Nor does it include coolers and all the other junk people take along
that can easily add another 100 lbs or more.

> I really need to know the
> weight of this unit, with its factory installed 100 HP outboard, to know if
> it's within the towing limits of my Venture van.

You also need to take into account extra weight IN your van, including
people and all their junk.

> Anyone have any suggestions on where to get this info, other than stopping
> at a roadside weigh scale and unhitching it on the scale?

If you know the weight of the van--which should be in your owners
manual--and the trailer, you shouldn't have to unhitch it...just
subtract 'em from the total weight.


--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://69.20.93.241/store/customer/product.php?productid=40&cat=&page=1

0 new messages